Overbridge 2.0.31 Public Beta

Overbridge 2.0.31 Public Beta

This is a minor update that fixes the support for macOS El Capitan 10.11 and macOS Sierra 10.12. Devices are now correctly recognised by Engine.

Improvements since last version (2.0.30)


  • Fixed macOS El Capitan support
  • Fixed macOS Sierra support

This is a public beta, as opposed to a stable release. As a result, we encourage you to submit any queries or issues to our support channels. The public beta will continue until we are in a position to release a stable version. Make sure you read the manual, the topic How to report issues and the section below with Known Issues.

Each Elektron Overbridge device typically exposes all individual track/voice channels as separate USB Audio channels, for multi-track recording into DAWs. Some Elektron Overbridge devices such as the Analog Rytm and Analog Four also allow you to route audio from a computer host into individual track audio paths for intricate processing. The Analog Heat acts entirely as a sound processing unit. The plugin routes audio from your computer host, through the effects chain and back into the host. All Elektron Overbridge devices allow you to play audio from the computer host directly to the device’s main output, making the device act as a sound card for playing back music etc. The Overbridge Control Panel application is bundled together with the drivers, providing a simple channel monitor for your devices.

The suite includes

  • Audio over USB functionality for all Overbridge-enabled devices
  • Overbridge Control Panel
  • Overbridge Engine
  • Standalone Editor for Analog Four, Analog Heat, Analog Keys, Analog Rytm, Digitakt and Digitone
  • VST Plugin macOS and Windows for Analog Four, Analog Heat, Analog Keys, Analog Rytm, Digitakt and Digitone
  • AU Plugin for Analog Four, Analog Heat, Analog Keys, Analog Rytm, Digitakt and Digitone

USB Audio drivers for Windows and macOS
The USB Audio Drivers will expose Audio and MIDI-interfaces for Elektron Overbridge devices.
On Windows, WDM and ASIO audio interfaces are provided.
On macOS, HAL and CoreAudio audio interfaces are provided.

Standalone Editor for Windows and macOS
The Standalone Editor allows for controlling the Overbridge enabled devices parameters via a GUI desktop application and also managing sounds and samples on the device.
The Overbridge Engine handles all USB communication between your connected Elektron device and the standalone editor.

VST Plugin for Windows and VST/AU for macOS
The Plugin allows for controlling the Overbridge enabled devices and stream audio via a VST Plugin. This makes it possible to sequence, sync and automate the device with your DAW. Audio will be streamed to the plugin making it possible to use your audio interface of choice in your DAW while still receiving audio from your unit.
The Overbridge Engine handles all USB communication between your connected Elektron device and the VST/AU Plugin.

Total Recall
This feature lets you save projects from Overbridge enabled devices into your DAW’s project.

Total Recall can be enabled by pressing its icon in the plugin. The unit will then sync the project files with the DAW. When opening a DAW project that has Total Recall enabled and a synced project the unit will ask you to confirm that you want to transfer the project from the DAW to the unit’s active project. Any unsaved projects will be lost.

This beta release requires you to have the listed firmware installed on respective units. These are beta OSs and are not guaranteed to work in any other setup.

  • Analog Four mkI/mkII running OS 1.40A
  • Analog Keys running OS 1.40A
  • Analog Rytm mkI/mkII running OS 1.50A
  • Analog Heat mkI/mkII running OS 1.20
  • Digitakt running OS 1.11
  • Digitone and Digitone Keys running OS 1.21

Minimum Computer Requirements
Overbridge 2.0 requires a high-performance computer optimized for audio production. Elektron recommends the below specs as minimum specs.

  • At least 8GB of RAM.
  • At least Intel Core i5 CPU.
  • OpenGL 3.2 capable GPU.
  • Dedicated USB host port for each Overbridge hardware device. USB Hubs are generally not supported and may cause problems with both connectivity and performance.
  • Windows 10/macOS 10.12

The specs are not the only thing necessary to have a smooth experience. Real-time performance of the system is equally important. This is affected by other running processes and by different manufacturers of computer hardware. There are tools available to analyze systems.

DAW Support
This version will work best with Ableton Live and Bitwig. But other DAWs will be supported as the beta progresses.




Analog Four/Keys MKI:
Analog-Four_Analog-Keys_OS1.40A.zip (824.0 KB)

Analog Four MKII:
Analog-Four_MKII_OS1.40A.zip (845.0 KB)

Analog Heat MKI:
Analog-Heat_OS1.20.zip (452.8 KB)

Analog Heat MKII:
Analog-Heat_MKII_OS1.20.zip (463.6 KB)

Analog Rytm MKI:
Analog-Rytm_OS1.50A.zip (1.1 MB)

Analog Rytm MKII:
Analog-Rytm_MKII_OS1.50A.zip (1.1 MB)

Digitakt_OS1.11.zip (745.3 KB)

Digitone and Digitone Keys:
Digitone_and_Digitone_Keys_OS1.21.zip (1.0 MB)

Overbridge User Manual_2.0_Beta.pdf (1.0 MB)

Update Notifications

Run the Overbridge Control Panel application regularly to ensure you get automatic notifications about the availability of software updates directly from Elektron.

Upgrading from previous Overbridge versions

If upgrading from Overbridge 1.15 or earlier, note that a complete uninstall of the previous version will be performed first. This means you will lose any previously installed Overbridge plugins and Overbridge drivers if you install the Overbridge 2.0 Public Beta.

Known issues

  • Issue with paramters under certain cicumstances not syncronizing propperly for the AR mk1.
  • Automation using external MIDI CC or using Overbridge may slowdown the units GUI.
  • Higher loads on the CPU may cause dropouts when using the units as Audio Interfaces.
  • Unit selection list in the plugin stays visible when hiding the plugin if it has been left open.
  • Issue with latency for MIDI when sending MIDI from the device to another external device.
  • Stability issues.
  • VST plugin does not utilize retina resolution (Windows).

To think about when using an Overbridge unit as a sound card:

Most Overbridge enabled devices can be used as 2 in 2 out interfaces in addition to the audio over USB for each individual voice. This means that if you are not careful with your routing and where/what you are monitoring, you might get feedback or voice doubling. Especially when software monitoring in your DAW.

In the Digitakt, doubling of audio can be prevented by turning off all internal audio sent to the mains out on the Digitakt. This is done by changing Settings > System > USB config > “Int to Main” to “Off”. Auto has no effect when using the Standalone Editor.

The Heat is a 4 in 4 out interface and will not be affected by the issue described above. If you still experience issues, check in the Heat manual that you have set up the routing correctly.


Thank you for this! Overbridge is back on my two MBPs :slight_smile:


Very nice, with releases like this the team must be creeping pretty close to an RC!


Great stuff. Am I right in thinking that if we’re not using the two MacOSes mentioned that we should stick with No other changes, right?


While I’m not Elektron Support I would say if it’s working “don’t eff with it” :wink:


yes, you can stick with 2.0.30 if that one works fine for you!


Thanks for confirming. Works great except hanging notes on DN, but that’s an upcoming fix so I’m told by support :ok_hand:


Upgraded Overbridge and C6 isn’t recognising the hardware to do the firmware upgrades.

Love the beta so far. Totall recall is an amazing thing to see in this update of overbridge. The only thing I’m having issues with is midi sync and some audio glitches.

1 Like

High Sierra - 10.13.6

A4 mk2
AR mk2
AH mk1

all working like a dream, thank you for your hardworking :*

1 Like

Works like a charm, no more cracking at lowest buffer size for me. Thank you so much!


@brykt @David
i tried out on my windows partition last week (usually mac only) and this morning the engine informed me of the .31 update - but clicking on the window’s banner takes you to a 404 page. works fine on mac (brought me here!)

[edit] sorry it’s the Oops! page not a 404. turns out we need to be logged in for the OB Engine’s update link to work.

thanks for reporting this!

We will sort it out as soon as possible.


it worked for me brought me here with on win 10

Hmm. I guess we need to be signed in to this site for the link to work. I wasn’t signed in here on Windows…

[edit] yep that’s the issue. need to be logged in or you get the Oops! message (not a 404 as I said earlier)


The issues with the previous beta on my sierra mbp and A4MKI are resolved! Everything seems to be running smoothly so far.

Really really solid of the people at Elektron to continue to offer support for the MKI users and the probably relatively small group of people that are on an older os. Thank you!


This rev made all the difference. For the first time since I bought my AR2, Overbridge installs, recognizes the AR2, runs on all three of my DAWs and functions as a plugin. Plus, I haven’t heard any glitches so far. Running Sierra on a 2012 MBP Quad Core 2.8 GHz i7.


How can i record the external in o my daw?i use ableton and i know how to route the single voices and the fx but cant get it work for the external inputs

Depends what machine you have but for example, DN channels are as follows: 1-2 main outs or FX only if you route correctly, 3-4 track 1, 5-6 track 2, 7-8 track 3, 9-10 track 4, and 11-12 external inputs :slightly_smiling_face:

i have analog keys