If you don’t mind, can u put OT on lower deck and take photo? pls
i want to order this stand
I have the stands and the octatrack does not fit on the lower shelf.
if my kitty walked on my Octatrack, she’d only have octa-lives left.
9 Likes
But you can’t plug the cables in though? I have these stands and I can’t use the octatrack on the lower shelf.
this is what i scared
thanks a lot, man
Well you’re right then. Perhaps use angled cables? But you’d lose input A/B
DT and DN’s I/O is at the bottom of the unit. OT’s are bottom and top. probably the issue the review was running into and why your setup works OK with DN+DT.
1 Like
which stand u can recommended, guys?
2 decks, like this
lower shelf for OT
upper deck for some synths, like Sirin/303 etc
Damn, I already had the Roadworx stands in my basket with the same intention of placing the OT on the bottom and DT+DN on top. Glad you guys posted this but it´s a huge bummer. This stand looked ideal…
1 Like
While this might not be for everyone, I’ve just been making all my stands as-needed from a big batch of laser cut parts that I had a shop run off for me, plus lengths of 4mm threaded rod. It’s worked really well so far.
These are definitely studio stands, but you could go up to 8mm ply and slightly bigger pieces and maybe 6mm rod and have something pretty road-worthy. Would pack down tiny, too, if you took the time to take them apart.
14 Likes
Never heard of it. Is that a new Eurorack manufacturer?
8 Likes
That house looks pretty amazing. Have a good one, don’t spend too much time on the digitone!
4 Likes
Only evenings after the drinks and sun. Las Vegas, so might hit the strip at some point. I don’t gamble, but I’m sure there’s some fun to be had. (Got vaccinated, so a tiny bit less worried now.) 
It’s my wife’s brother’s house. Being in Seattle, we thought some sun and a visit would be nice.
6 Likes
Setup ambitions.
Direct link:
6 Likes
kiiiinda looks like you’re still working though (on the laptop)… 
5 Likes
Can you use all ins & outs (audio, MIDI & USB) on the Digis set up like that?
I’m still bummed out that the OT can’t be fully plugged when it’s placed on the bottom and since user @supchikov doesn‘t reply on the requests to name his stand the Roadworx stand seems to be the only viable option that is easily available in Europe without ridiculous shipping costs. Or could you maybe even elevate the top with something solid and use longer screws to fix the issue?
still think right-angled cables would work fine. you would only need them for the top-most jacks on the OT. the bottom and midi should be fine, since @closencounters is having no issues with the DT/DN in it. this MAY force you to have one or two of the top-most right-angled cables sticking up above the OT’s face plate (IF you’re using all four stereo I/O options). but you shouldn’t have any problem using all jacks. hopefully someone can verify though…
1 Like
I do use all ins & outs on the OT and I‘d like to avoid extra costs for cables that I usually wouldn’t need.