A4 mk1 sequencing TD-3 MO via CV/GATE/trigs

Looked around the forum and didn’t find the answer. Also, AIs were giving conflicting information.

Question is simple, can the Analog four mk1 sequence the TD-3 MO with its ANALOG outs.

In other words, sending not only CV/GATE but also 2 different triggers, one for accent and one for slide. Is it possible?

I don’t own one by the way, so I can’t just test it.

Thanks in advance yall!

I glanced at the manuals for the A4 and TD-3-MO, and what you’re asking should be possible. I haven’t personally tried it, so my answer is based on the info in the manuals (page 67 of the Behringer manual & pages 73 in the Elektron manual).

Is there a particular reason why you’d prefer to use CV to control the TD, versus using its internal sequencer or MIDI?

(Edited to correct page # for the Elektron manual, based on Watto’s post below)

1 Like

Good question. As for the internal sequencer, its just too primitive. As far as MIDI out, I am already using that to control my odyssey mini.

So the A4 can send not only cv/gate but also trigger information that can be used to trigger slide and accent in on the td-3 mo?

Seems like a great way to use the A4, since it has a superior sequencer to anything else I’ve tried.

But I haven’t seen anyone use it that way before, and you would expect someone to do so right? Couple of the best pieces of kit in the last 20 years


Page 73 of the manual.

1 Like

Does your td3 have cv inputs for accent and slide?

1 Like

The “MO” version does have CV inputs for quite a few features

2 Likes

Yeah, no swing on the TD’s internal sequencer is a missing feature IMHO, although that was the only thing I felt like I couldn’t do with the TD’s sequencer.

A4 would give you swing, plus conditional trigs, plus the option of running the TD track at a different speed… OK, yeah, I guess I see what you mean about the TD being limited (compared to an Elektron) :slightly_smiling_face:

2 Likes

Most of my experience with A4’s CV has been loopback into the control inputs(mk2 only), for sidechain ducking, but there ARE 4 CV outs so I see no reason why you couldnt use A4 to control all of that as long as you have a destination input for accent/slide on TD3MO.

You can also run the audio of TD3 through A4’s external input and make use of the lovely fx.

Personally I dont see the appeal of using a TD3 if you have an A4 though, I’d see aquiring an A4 as an upgrade.

4 Likes

Yes I know how to set it up, but it doesnt confirm that it can send up to 4 signals at once from the CV track (via CV ABCD) which corresponds to cv, gate, slide, and accent

There are pages for each CV out. You can set them to be whatever you need to get slide/accent to work

1 Like

Yes I already have an A4 and fully understand it’s a superior synth. Of course, the “303 sound” can’t quite be replicated by the A4, and debatably not even by the TD-3 for that matter.

But since it’s so inexpensive, the TD-3 MO can potentially be a great add on to the A4

1 Like

Oh I thought you said you didnt own an A4 yet, I guess you meant you didnt own a TD-3.

Yeah I have the original TD-3 and I dont really use it, the MO version may well be an improvement but I wouldnt recommend buying one.

1 Like

I’ve done it with OXI in the past, check it out:

With 4 CV outs on A4, it should be more straightforward to set up, but probably not as comfortable to use as the OXI MOD lane setup.

2 Likes

I did this with the Behringer MS1 mk2 and sequenced it using the CV outs of the A4 once. Was a while ago but it was definitely possible. I have actually been thinking of getting the TD3-MO again (I sold it some time ago) to try it with the A4.
I can’t remember what the exact settings were for the CV, but I really just went by what ChatGPT told me and it worked.

1 Like

Yes sequencing an analog synth with the a4 is one thing (cv and gate) however sending not only cv and gate, but accent and slide data is my question. Some steps will require all 4 exported volts. I don’t even know of another synth that has cv, gate, accent in, and slide in

Personally, I prefer the sound of d16’s Phoscyon 2 plugin over either of Behringer’s 303 clones - the d16 plugin is also on sale at the moment for €35. Although, if you’re wanting the CV control from the A4, you’d have to get even more stuff to have your computer accept CV signals, so not ideal in that regard. But if you just want the 303 sound, I’d recommend Phoscyon, if you’re not allergic to using software instruments.

1 Like

Software is great, just not as fun, as Im sure everyone here knows.

Sending cv signals to the computer is kind of silly when you can send midi or even connect with usb

I just looked at my comment again and I think I left out an important detail. I used three CV’s per step: CV, gate and VCF. So I sequenced the pitch, gate and filter cutoff per step. So it’s not four but three, but it can send three per step … if I had a fourth thing to plug in I would test it. The only other thing I could send to the MS1 that way is clock.