YES a real analog Compressor, but which one? Drawmer? Elysia?

i’m a big fan of the rms755, here’s a lil review by tape op

1 Like

Definitely. Will be happy to share any examples I can. Unit is on the truck for delivery today according to FedEx, so hopefully I can have some opinions on it soon.

If anyone would like some free mastering work using it just hit me up. :wink:

1 Like

More or less the same here. I’ll use the Shadow Hills with 1-2db at most on the optical then the same or less on the VCA. When it works for that material it sounds awesome, but it’s not what I usually try first.

I’ll occasionally use the UAD Fatso on 2bus, but when I do it’s usually a parallel setup. Some tracks come in pretty lifeless and “blah”, so I’ve had luck there. Again, usually not the 1st thing I try, but when it works… :slight_smile:


A tip for anyone wanting an equivalent of Fatso in a plugin outside UAD.
Try the Kush UBK-1.
I was able to reproduce the sound so it was indistinguishable from the UAD version.
When I sold my UAD system I searched methodically for VST replacements of my favourites UAD plugs before selling it, testing side by side

1 Like

Uh oh, now you made me curious about your list of UAD replacements! Care to share UAD plugs and their non-UAD replacements? :smiley:


A couple people asked about the Tegeler Audio Creme. I recently got one. Here’s thread I started for it: Tegeler Audio Manufaktur Creme


That tegeler audio review was interesting and to me, emphasizes my gut feeling (VCAs are easier to model than tubes in software)

Tube emulation is almost there, but not quite. Decapitator gets pretty close.

1 Like

I don’t have anything tube based yet… Analog Heat (which I’m very happy with) is as close as I get with saturation and distortion right now. I do agree with you though. In the limited online only comparisons I’ve heard software is getting a lot closer. Will it ever be as good? Who knows and that’s completely subjective anyway.

I’m very happy with the PA Black Box HG-2 plugin as well. That’s usually the 1st one I try when I’m going for tube sound. PA Vertigo VSM-3 is also a favorite of mine for saturation, but I’m always trying the Heat first. Decapitator is solid too.

I think you’re talking about my impressions? Here’s what I’ve been coming away with so far. The Creme is just easier to come up with something that sounds great and obviously a lot more tactile. It limits me in a way (pardon the pun) but the choices it gives all sound fantastic.

Are plugins hard? No, but I have a bazillion of them, so I sit there fiddling with a bunch of different ones swapping them in and out trying to figure out which is “best”. With the Creme, it’s turn it on, turn a couple knobs and BAM. Maybe try a few different variations, but that’s it. It’s almost effortless and it still sounds better overall. The plugins are very (in some cases extremely) good though… I completely and honestly have to say that.

For what I’m doing (mastering stuff) I’m really finding having a few key pieces of hardware is the way to go while doing the rest in software. I don’t feel like I’m going to collect a bunch of it. Probably 3-4 devices to build a chain with solid DA / AD and call it day. Everything else is plugins as needed.


I’m so incredibly inspired by all of this, I could talk for days about it.

But then again, talking about music is like dancing about architecture.

For the high quality DA-AD i would recommend RME. Well, at least i know their Fireface 400 firewire card is super top notch. Has anti-jitter technology and is well respected. Not sure about the other connection types (usb or thunderbolt), haven’t researched.

1 Like

I really like RME as well. I had one of their very early cards many years ago (honestly don’t remember the model now). I was coming from an Echo Event Gina and the RME was just completely solid. I’d like something RME for tracking the synths and samplers I have. One of the 1U USB/Thunderbolt ones but it’ll have to wait a bit.

For mastering, I’m pretty sold on a Lynx Hilo. I’m hoping to find a used one later this year. It seems to be the ‘low end’ of the ‘high end’ converters. Another choice is possibly a pair of the Dangerous Music units (again used), but that’s getting out of my league and budget. I definitely don’t have the money for Crane Song, Lavry, Burl or similar setup. I can’t blow $5K on converters unless I start a GoFundMe. :rofl:


i remember being entranced by the poetic title of “Crane Song” when first reading about them in the Katz book on audio mastering.

If we are talking actual mastering here AD/DA to and from external gear is equally as important as the external gear.
RME is good, I have a UFX, but it is not mastering quality.
As mentioned above you want Lavry, Mytek, Benchmark, etc.
I have had all the above and used Mytek for mastering chain, when I had external hardware
The Lynx Hilo I had was good but not as good as others. I found the bottom end on the Hilo a little thin, and imo not as flat as the others
You will need mastering quality monitors to hear the subtle differences, but they are there

A AD/DA loop of the Lavrey blue stuff is less than the Hilo and sounds amazing. Much better than Hilo IMO. It even gives a nice tape effect similar to the Crane Song that is useful on some material.

in 2004 i moved into the most gigantic warehouse with nothing in it except power points, a sink, and a sliding glass door.

oh, and the owner had a pair of totally gorgeous, huge, mastering-quality speakers. they were white and seemed large enough to rock a medium size outdoor doof. he said to me “if i gave you twenty thousand dollars to make this warehouse profitable, what would you do?”

“buy a vinyl pressing machine and make records for people!”

i didn’t get the twenty grand.

maybe if i came up with the idea of going with a mastering suite things would have worked out.

another cool thing i found an image of in the Katz book on audio mastering is this:

as regards product design it’s just so well-made.
for the purpose … audio mastering is such a mysterious art, enjoyably reductionist, forever complex. and this single freestanding item somehow represents that.
although come to think of it, some photographs would seem to indicate the unit connects to a couple of racks of processors.

but all of this is distraction from how incredibly luscious-sounding the Tegeler Creme could potentially be.
it’s just that there isn’t much to say about it.
just put a track through the Creme and then take it to the stage already! :heart_eyes::joy::scream_cat:

That is just a remote for the TC 6000 mastering systems

1 Like

lol yes it’s most likely replaceable with a Doepfer Pocket Fader and an iPad.

so easy to get won-over by product design.

but for truly useful purchase decisions, it’s gotta be all about the sound.
i haven’t actually heard what the Tegeler Creme does, although i have a sense that it is going to be totally enjoyable.

It’s fascinating how the mastering process often boosts the low and the high end of the frequency spectrum. and yet so much more is potentially going on within the actual function of mastering.

some people talk about the value of using two types of compression in series, maybe in a mixing context (or vocal recording context for that matter): peak compression to tame the highs, followed by RMS compression to boost the softer elements.

No unfortunately not.
TC 6000 has some of the most sought after algos in the business

The more accessible TC Powercore system had a few of its more simple algos onboard, but still sounded incredible.

1 Like

haha yes that was an intentionally throwaway statement - although was more in reference to just the interface/remote-control side of things.


actually one of the attractive features of the Deepmind is their collab with TC Electronics for the fx, in combination with the DM’s modulation matrix.
lashings of potential sonic fun times.

but after listening to the lush circuitry of the OB-6, i am now for sure going with that as the studio production synth. and perhaps even as a performance instrument (the desktop module being fairly size-economical).