Replacement rubber feet for Analog Heat/Digitakt/Digitone?

Elektron Gear
1

Hi gang - just picked up a used Analog Heat but the previous owner appears to have removed the little black square rubber feat. Ideally I’d like the same ones (both so it sits level with my 'takt and in case I sell it in the future - and who doesn’t like things to be whole?) - anyone know where I could get my hands on some? I’ll drop a message to Elektron in case they’re kind enough to post me some but I figure I might be lucky and find they’re a ‘common part’.

2 Likes
2

Please let me/us know what Elektron respond. I have the same thing with my 2nd hand Heat mk1, two rubber feet missing for some reason.

1 Like
3

I can’t be sure without trying them but I think they’re these exact 3M feet: large or small 3M RUBBER FEET Self Adhesive RUBBER FEET Pads ~ CLEAR BLACK WHITE | eBay

Just need to measure the ones on my Digitakt as they have a few sizes, I’ll let you know how I get on!

1 Like
4

@korpinen Just got some feet delivered and these seem to be the perfect replacement. I’m not 100% sure if it’s the exact part Elektron uses but if it isn’t it’s what it’s based on: https://www.3m.co.uk/3M/en_GB/p/d/v000057366/

3M™ Bumpon™ Protective Products SJ5008

Exact same dimensions, perhaps a slight difference in texture.

I got 12 for £3.

2 Likes
5

Thank you, will try to track those down in Finland/EU!

6

I once emailed Elektron about replacement feet for an Analog Keys that was years out of warrenty and they shipped some to me free of charge.

4 Likes
7

That’s good to know thanks

I was quite happy to get some extras I added some to the bottom of my 4ms eurorack skiff

8

Are these the same type for the Analog Four MK2!?

9

I don’t have a MKII AR/A4 I’m afraid so couldn’t tell you :pensive: Anyone else able to confirm if these boxes use the same rubber feet as the other Elektrons? The MKI’s have the same ones along with the OT MKII so I’d assume they are the same.

1 Like
10

I’ve had two of the factory installed bumpers fall off my Analog Heat Mk II as well as one from the Digitone. The glue just separates and peels off. For those of you in the USA, Amazon has a pack of 100 replacement bumper feet (50 clear, 50 black) that are the exact same measurements as the ones on the Digitakt, Digitone, Syntakt, Analog Heat, etc. for $9.99. These replace them perfectly and have a different glue. Maybe they will last longer.

3 Likes
11

Thanks for sharing this, now we need to get 25 people involved in a group buy on the 100 pack and only pay .40c per person for a set of 4 :smiley:

Amazon is great until you need 1 of something they only sell in packs of 100. Still, $10 is a pittance compared to being annoyed by missing rubber feet or a synth that wobbles when you touch it.

3 Likes
12

I needed these as had same thing happen with my Digitone and Heat. To be able to put back on Fonik stand.

1 Like