Push 3 Users Thread

The Lounge Other Gear
2428

Here is the latest beta list for PUSH if anyone is interested. 11.3.20b1

Push 3 - New features and improvements:

  • Push’s pads and some of the buttons can now be used when browsing the Push 3 Tips lesson on the hardware.
  • When Note Pitch Bend is set to Automatic in Push’s Expression settings, the glissando type will be pitch bend when using the External Instrument device with the Channel set to MPE.
  • Two new buttons, ÷2 and ×2, have been added to Clip View for halving and doubling an audio clip’s tempo.
  • External Sync can now be enabled in the MIDI tab of the Setup menu, this makes it possible to set up external MIDI clock sync directly from Push.
  • The half-tempo button for audio clips and the Simpler device is now labelled as ÷2.
  • A Crop command has been added to Clip View for audio clips.
  • The layout for the Resonators device has been improved on Push 2 and 3.
  • In the Audio tab of the Setup menu, there are now two entries for Clock Source: Internal and ADAT In. When set to ADAT In, Push will be synced to the external clock, and Live’s audio engine will follow the external clock rate.
  • When hot-swapping audio clips, the browser will open to the location of the selected clip. When hot-swapping empty clips, the browser will open to its main list of categories.
  • The current firmware version is now displayed in the Software settings even when Push is in Control Mode.
  • A more meaningful firmware version is now displayed in the Software settings.
  • Updated the design of the Quantize options:
  • The % character next to the Swing Amount and Quantize Amount controls are larger.
  • The Quantize To lists are now arranged vertically.
  • The Play button is now deactivated when external sync is enabled.
  • In the External Instrument device, meters are now visible for the Channel list of inputs.

Push 3 - Bugfixes:

  • Fixed the following bugs:
  • When loading a Set with a wavetable selected in the Wavetable device, the device’s visualisation is now reliably shown after loading; this fixes an issue where Push would show “No Device” under certain circumstances.
  • When entering Hot-Swap Mode while the second Macro page of a Rack device is visible, the Rack device can now be hot-swapped.
  • Selecting the second Macro page of a Rack device while holding the Delete button will now delete the Rack device.
  • Push no longer crashes when selecting the first slice of a manually sliced Simpler device by pressing the pad representing that slice while holding the Select button.
  • When switching between two clips in Clip Mode, the clip’s name and parameters are now correctly updated and displayed.
  • Connecting Push 3 to a computer now works correctly when the currently selected track contains a Wavetable device.
  • The timing of MIDI coming out of Push 3 is now more accurate, especially at higher audio buffer sizes.
  • When sliding between pads to change pitch on Push 3 with the Repeat button active, the repeated notes now follow the pitch bend and timbre correctly.
  • Fixed a typo in the message that appears on Push’s display after successfully authorizing Live.
  • The Transpose parameter is now correctly available in Sampler’s main bank on Push 3.
  • The waveform in Push’s Clip View for audio clips is now correctly updated when dragging warp markers around or when using the ÷2 or ×2 buttons.
  • Max for Live devices that observe the values of controls without getting them will now work with Push 3.
  • Push 3 will now retain the last chosen buffer size after being rebooted.
  • When nudging a Simpler slice’s start position past the end marker of the sample, Push will no longer crash in Standalone Mode.
  • After changing the metronome sound setting on Push 3, and.then restarting the unit, the sound setting is now preserved.
  • Previously, files with names containing percent characters would not show correctly on Push.
  • A MIDI track’s instrument can now be played when its input routing is set to “FromPush”.
  • After Push starts up in Standalone Mode, there is now less of a delay before certain features start to work. Also, the first device or Set loaded after starting Push will take longer than before if it uses Max for Live.
  • The playhead in Push 3’s Clip View of audio clips is now correctly displayed when using the ÷2 or ×2 buttons.
  • It is now possible to open the same Set twice in a row via Live’s Push browser label.
  • An icon now appears to indicate whens a selection cannot be dropped when attempting to drag and drop it on or within the Push label in Live.
  • The demo song will now be loaded on startup if the onboarding tutorial wasn’t finished during Push’s previous run.
  • When starting Push 3 in Standalone Mode, the bottom row of buttons are no longer lit.
  • It is now possible to use Max for Live patches and presets that utilize Node.js on Push 3 in Standalone Mode.
  • Toggle controls are once again shown in a white instead of gray when active.
  • The Cue volume can now be reset to its default value by tapping the Volume encoder when holding the Delete button, while the encoder is controlling the Cue volume.
  • Samples and .amxd files collected and saved into Projects no longer show up as duplicates in their respective browser categories.
  • Previously, when holding a step and a note in the Melodic Sequencer + 32 Notes layout, releasing the note after releasing the step would “deactivate” the step sequencer.
  • When saving a Set after renaming it, the Set is correctly saved under the new name.
10 Likes