I would like to know if its possible to send program changes on certain trigs to the bass station 2. I looked for cc control but cannot find any data on the bs2 for that and in midi note setup it only allows me to change once which physically works but i would like to cycle through the patches and sample those patch changes so trigger the change on the trigs.
help would be appreciated.
i found this but I am still none the wiser, i am reading it as I have to associate a different pattern to a program change. Weird Midi Program Change Problems
looked at using an lfo to do slow program changes but failed that way too
The OT’s MIDI sequencer does not allow Program Change messages to be sent on individual steps. These messages are only sent when a Pattern that is linked to a new Part becomes active. See page 114 of the manual.
You can also choose whether the OT sends a Program Change message every time it changes Pattern. The value of the Program Change message is fixed to the number of the Pattern. See page 42 of the manual.
Yes i saw that in the previous post and the manual, wasnt sure if that had changed with an update. Ok i will use midi ox and send the change that way and take the sample manually with ot as slave. Thx for quick confirmation.
FWIW, you can do this with the Monomachine and Machinedrum.
really wow, I dont have either of those the OT was my first elektron purchase and this year well with a BS2 in june a sub 37 and jdxi in july and the OT and electribe this month, I think I am synthed out for this year BUT they do look like great gear too.