M:C Receiving CC issue

Elektron Gear Model:Cycles
#1

Hi,
I’m trying to send a CC to the m:c to change the Machine on a track. Track 1 for instance, which is set on midi channel 2. I can trigger note on the m:c with midi channel 2 on my sequencer, but I can’t send cc…
To change Machines, it’s seems to be CC70, but the m:c doesn’t respond.

Here are my parameters :
Config Menu / Midi :
In/Chan T1 in midi 2 ; AUTO in midi 2

I must be forgetting something or making a mistake, could someone have an idea ?
Thanks !

#2

Try setting the auto channel to something other than the same as T1, it might be conflicting. I think auto channel takes priority and isn’t what you want to send MIDI CCs to.

#3

Ok I will try that, thank you !

#4

So I tried, it doesn’t work :frowning: Thanks anyway
I don’t understand, because other CC messages work.
Only the Machine selection (CC 70) does not work.

I reread the manual, my track 1 is on channel 2, Punch in also on 2. Auto in is on channel 1. Also check the midi ports: inp from: M+U, the midi filter: Rcv note : ON ; Rcv CC: On ; ENCS: Int

Mystery

#5

ok I understand, my firmware was not up to date. I just updated, it works XD