How to Send/Receive MIDI CC

[Eltron]

Hi Elektronauts!
I recently bought a MODEL CYCLES and cannot send/receive MIDI CC from/to my DAW (Digital Performer).
Any ideas/advices??

Thanx)))

Eltron

[bibenu]

You may want to take a look at this list of settings first and see if that points you in the right direction.

How to connect the M:S to the Korg NTS-1 via Midi - help needed

This bit, about the samples and cycles, should be in an FAQ somewhere. I always manage to forget one of those settings and spend ages hunting for it. Thank you @PeterHanes On the M:S, as well as the settings you listed, you need to make the following setting in the M:S’s CONFIG > MIDI > PORTS menu: set OUT TO to “MID” (or “M+U”) set OUT/THRU to “OUT” and ensure that Track 6 is not muted. there is a very small chance that your MIDI adaptors are not what they seem and are messing up the pola…

[Eltron]

Ohh thank you so much!
I have these settings already and still doesn’t work!

1. BTW I use the USB cable not midi!
2. What about Track 6??
3. Page 3 (of Ports), the OUT POL, there’s an OUT & THR option. What is this?

Thanx for your reply)))

[bibenu]

@Eltron

I have these settings already and still doesn’t work!

You might need to give more detail about what’s not working. In versus out, midi notes, clock, transport, program change, CCs

@Eltron

1. BTW I use the USB cable not midi!
   …
2. Page 3 (of Ports), the OUT POL, there’s an OUT & THR option. What is this?

If you’re using usb then OUT POL doesn’t apply, thats just for the minijack (to DIN) connections

On OUT/THR: OUT means output of your M:C goes to the DAW, THR means the midi input is just echoed ‘through’ to the midi output, which I’m sure is not appropriate if both in and out are connect to a DAW.

[harrismix]

I’m also not getting any midi notes to external gear when pressing the keys on the cycles . . . (set to midi out, port to M+U etc)

[algorithmtoo]

Make sure you have your Midi out set to USB.