Help on replacement ALPS fader for Allen & Heath Xone:23

The Lounge General Discussion
1

Hey Guys,

Trying here to see if someone can help me.

I took over an Allen & Heath Xone:23 mixer from a friend who basically broke it and i need to replace 1 fader and 1 potmeter for it to be back working…

Both the faders and the potmeter are ALPS but when i search the coding online i do not find these and it looks like potentially old coding… maybe some can help me finding a good alternative?

Fader: ALPS 419C-10KB
I know this is a single 10k Ohm fader B taper with 45mm travel - 60mm long and 8 mm wide.

The only one I could find coming close on ALPS data sheets is the RS451-0415-C0-P0-B103

  • 45 is travel + 1 is single
  • 0415 is metel lever of 15mm
  • C0 - no center detent
  • P0 - no mounting plate
  • B103 - linear 10k Ohm

But also i can’t seem to find this type number anywhere… what do i wrong?

Thanks for the suggestions if you have some… Ron

2

I dont know where you are based, i would write some skillful shop and ask them. Something like:

Or Thomann or whatever would be in your area.

For further more, like the Potentiometer also. If nothing helps contact A+H itself. I for example had once to find a adapter for a PX:5 to fit in a Innofader as a Crossfader and there was nothing to find in the internet, so i had to reach out to A+H to help me directly.

1 Like
3

Why didn’t i find this one before?

Thanks for the tip - should have just google fader replacement vs the code on the fader… blonde moment…

1 Like