Digitakt controlling Eurorack case

Elektron Gear Digitakt
#1

Hello Good People!

Im looking for tips how to use my Digitakt as the sequenser for the
Behringer K-2 and then send a clock to the Moog DFAM.
Im new to this and havent got my head around the routing yet. Im open to getting New or changing put modules if there is something more suitable.
I also have a keystep that i sometimes use directly to the K2 sometimes.

My case have the following;
Behringer K-2
G-Storm Electro KVP - MS-20 to Euro Pitch CV + Gate Voltage Processor
Moog DFAM
Looking into Sonoclast moduls for DFAM:
MAFD 2hp (MIDI Adapter For DFAM) / RFD (Reset For DFAM)

Behringer CM1A - 16-bit MIDI to CV Converter Module - I got this for sending midi from the Digitakt to the case, but im not sure its the most suitable.
Hexinverter Myatnt brain seems like a better option ?

for sound processing:
Animal Factory Amplification Coma Reactor V2 - Textural Delay
Animal Factory Amplification Godeater - Heavy distortion

Untitled-1
Untitled-12197×1897 635 KB

#2

There are several ways to skin this cat. I’d plug the keystep midi out into the midi in on the digitakt. Setup the auto channel in order to easily switch triggered devices by simply pressing the different midi out tracks on the digitakt (buttons 9-16). You can clock the digitakt and the dfam straight from the keystep. I’d probably trigger the K2 from the digitakt. I use mine as the “brain” of my setup. It easily controls up to 8 external devices via midi and I control my modulars with the mutant brain. I’ve been very happy with it. Figuring out how to get everything properly working takes some time, but it’s well worth it. Good luck.

1 Like
#3

Thanks for the answer and pointers! Will try it!
Seems Mutantbrain is the piece missing in this setup then :slight_smile: