Connection clock to Behringer Crave

Elektron Gear Analog Rytm
1

Heey elektronauts!

so since a week i’m the happy owner of a Behringer Crave. After some jamming and trying a I wanted to set it up together with my Elektron Analog Rytm mk1.

I want to use my Analog Rytm as the master clock. So send the clock to the crave and to the my microKorg.

I have the Sync A connected to the crave and the Sync B to my micro korg.

in my analog rytm the sync > clock send is on
under port > out put port function is set to midi , under port> output to is set to midi.

my microkorg is synced but my crave isnt, and i cant really find anything online how to set it up

somebody els maybe know a way ?

2

I am using midi and it works. It sounds as if you try a different way?

3

Welcome to the forum!

You appear to have your AR set up correctly to send MIDI clock to the Crave. You might want to activate TRANSPORT SEND in the SETTINGS > MIDI > SYNC menu if you haven’t already done so.

The Crave’s manual is sparse but it does indicate that the Crave should respond to MIDI clock messages. I saw that it has a Tempo Input setting (see page 41 of the Quick Start Guide) with three different modes: it could be that you need to adjust that.

Also:

  • does the Crave’s sequencer work for you without receiving timing information from another instrument?
  • is your MIDI cable OK? You could try another cable to check.
2 Likes