Analog keys cv gate with novation bass station rack

Elektron Gear Analog Keys/Four
1

Hello,

I control a “Bass Rack station” in CV Gate on track 6 of the Elektron AK.
I configured the CV OUT A the “pitch V / oct” and the CV OUT B a “Gate”, everything goes well,
and am the tuning procedure on page 57 of the manual to play the notes on the keyboard, and this is where I failed

I configured an “A2” in Note 1 and “A4” in Note 2 and I seek voltages to just fall,

I get almost the range of the keyboard, but occasionally the notes become random or repeat.

Does someone already had this problem? I myself shall be evil?

I configured the novation so that it receives the V / oct
However, I also tried HZ / V but same problem …

Thank you .

CVA
Pitch v / oct
Note 1: A2
Volt 1: 2,357
note2: A4
volt 2: 3.011

CVB
gate
V-trig
5v

2

that looks strange

for my dark energy 2 I set

  1. c3 = 0v
  2. c6= 2v

that means over a range of 3 octaves the DE plays “nearly” in tune. To play deeper notes in tune I also tried to set 1. c1=-2v witch worked also fine so far.

3

Thank you for your reply.
I will try other configurations
but using the same configuration as yours this
not working at all.

4

Ok is good , it was just câble problem :slight_smile:

my set :

CV out A

type : GATE
polarity : S-trig
level : 4.5 V

CV out B

pitch V/oct
note 1 : C2

  • 1.000 V
    note 2 : C5
  • 2.000 V