Analog Four CV Pitch calibration

So i am trying to use the cv as much as i can and i am able to do some nice things, the only problem that i have is with V/oct. If i use the pitch via midi from cv track there are no problems, all my modular vco’s are tracking perfectly but if i send it as V/oc with a cv channel the tracking is not well, is not going ONLY left or ONLY right if i increase the pitch (if so i could fix it), but rather is going one octave in the left, the next on the right and so on, so i could not find any way of calibrating it… Do anyone knows how to calibrate the v/oct sent from the cv tracks?

It’s covered in the manual in detail with examples, there’s no benefit in just pasting or repeating what’s there, if Mk2 hit page 60 - there are scores of threads covering the usual snagging points if that doesn’t sort you out

Thank you for response, i looked in the manual and tried to calibrate it with the cv config with no success. Maybe i did not made myself understood or you miss the point. I will write here the actual measurements.

I made a sequence with C1 C2 C3 C4 C5
I use mother32’s vco
With midi sent from cv track to a midi to cv converter and then to m32 all notes are perfectly in tune
With direct V/oct from cv track i get this
C1 0 ct
C2 +4.9 ct
C3 -3 ct
C4 0 ct
C5 -6 ct

So as you can see is not something that can be adjusted with CV Config. Do you know how to calibrate in this situation, i did not found the answer anywhere yet …

If it’s the same on all 4 cv channels then you can probably start to look at the M32’s calibration - you may not get a broad range with some gear - a bit of drift adds character imho, it’s a linear range so if you hit tuning in spots 3 octaves apart and it drifts in between then there’s not a lot you can do

you can ask support if re-calibrating your CV channels will help, but i doubt that would account for apparent non-linearity - i’d try the M32 with a different CV source if possible - and certainly with different CV channels from the A4

Already tried with all 4 cv channels and is same result. Also i have the M32 for more then a year, sequence it always from external v/oct source and it’s always in tune. If i repeat the process with a different vco i have same results as the one with M32. I am trying now to send the pitch and gate with midi and the envelopes and lfo with cv but there is some delay, the midi hit’s 4ms later so it’s not so good for fast attack sounds.