If its INF it doesn’t have an "end’ and therefore won’t change upon the end of the pattern…cause there is none. This is not a bug but how it works.
“Direct” options are your answers.
It’s a confirmed bug the CHNG parameter has no effect after 1.45 usually if you had INF you could put when you wanted the pat to change there now it doesn’t work… direct is a work around I suppose.
Ah. I see. My bad. Carry on.
Yeah, CHNG is broken. Direct jump is only possible workaround (for manual pattern change in live use situation) until its fixed. Unfortunately direct jump will make no difference if you have inf’ patterns in arranger mode.
the CHNG issue is a real problem for many of us playing live witht the AR, any idea of possible date for this fix??
1 Like
I didn’t see this and opened a separate thread about it here:
I can open a ticket if you haven’t already.
Yeah. I have not made a ticket, so feel free 
I downgraded my AR MK1 this week end because of the CHNG issue … I couldn’t play my live performance without this, like a lot of people here I guess.
Everything is working well. Only one project do not have sample loaded in and assigned, this was the only project that I created under OS 1.45…
This might not be a bug, but anyone knows what happened to the legacy fx box? Can’t find it through FN+ Sound?
Anyone find the legacy FX box?
It’s there for me…
Function + Sound -> Sound Settings -> Legacy FX Send
1 Like
Ok cool, ill have to check again I guess!
I’ve had multiple freezes on my mkI, have never had that issue before. Hasn’t occurred live but the possibility of it happening is especially disconcerting as sometimes I’m exclusively using the rytm for live sets.
1 Like
mk2 here.
this may not so much a bug but when setting up performance macros, Changing the filter type shows 0-127 like other parameters rather than scrolling thru the filter types, visually.
trying to know exactly which filter tyoe you’re on blind like that is tricky.
am I missing something? or is there a logic to the various filters locations within the 128 digits?
Rytm Mk 1 - is anybody successfully sending cc’s/nrpn using pad pressure with the new os?
I’m trying to setup ar pads to control a4 performance macros and I just can’t get it to work. Read all the threads I can find on here and spent hours trying all combos of midi settings I can think of but just wont work, so wondering if it’s a potential bug?
MK1 OS 1.45 - sends pressure / aftertouch CC’s fine over here
2 Likes
Cheers for the response. Out of interest where are you sending the cc’s? I’m assuming that the pad pressure is sent on that pads track channel or the auto channel depending on settings?
I’m not using them I can just see the CC’s show up in Ableton and my Xcode debug console. I have always used Track Channel output (not AUTO) and I use CC’s (not NRPN’s).
2 Likes
Ok thanks man thats really helpful. Sorry one last question if you dont mind. Do you know if pad dest and pressure dest both need to be set to int+ext for the cc’s to send. Pretty sure I tried this in all combos but…
Even when I set Pad Dest & Pressure Dest to INT or EXT I am still getting CC output over USB MIDI. I always use INT + EXT, normally.
Not sure what’s going on in your case :[
2 Likes