Your setups [ 10k Archive]

nionmu · 2020-10-15T22:31:49.100Z

Maybe he means the door on the wall ? but looks like a closet to me…

sentientminority · 2020-10-15T22:37:25.875Z

Ah, yes the door can’t be opened with the drawers down but they flip up in seconds. Only the shoe and coat cupboard anyway.

sentientminority · 2020-10-15T22:37:59.564Z

Having one of those days

Kegeratorz · 2020-10-15T22:40:37.196Z

Well, there is a ton of doors that could be in question. I should have been more clear. I assumed closet though and not a means of egress. Amazing work and design, jam on!

r1n9o · 2020-10-16T11:12:23.583Z

Please say more about your rack construction. I was planning to rig up something similar. (but maybe much taller.)

PekeDorty · 2020-10-16T11:46:17.481Z

This is so awesome! I imagine a studio where you could tilt everything up to a flat surface - awesome build! Also dust proof!

Adelock · 2020-10-16T13:57:53.759Z

I just hope those Lego bricks don’t fail… could be a mess in there !!!
Seriously though very creative

Strutter · 2020-10-16T21:06:53.987Z

Recently I moved into a little house in the middle of nowhere. Here is my kitchen/studio.

118242806_184179469744323_1798100835931405061_o2048×1536 669 KB

dfunk1983 · 2020-10-16T21:14:22.164Z

What’s that tube mixer thing?

Strutter · 2020-10-16T21:22:20.630Z

It´s a custom built tube mixer (thing) by Verde Audio with tube modulators for tracks 5&6. It also has a master compressor and EQ. I had it made initially for Ciat-Lonbarde stuff but lately it has been there for re-amping and all kinds of processing since it has cv ins for the tube modulators, fx sends with panning for the returns and because it just makes everything sound so much better.

dfunk1983 · 2020-10-16T21:23:13.275Z

Sounds amazing and fun!

mishpult · 2020-10-16T22:39:20.138Z

I’ll leave mine again here, not that anything has changed, but that’s the point:)

image640×623 124 KB

chiasticon · 2020-10-16T23:11:20.125Z

I like that there’s no computer.

why are the OT and MnM separate? were they bad and now they’re in time out?

DanJamesAUS · 2020-10-16T23:46:17.672Z

Those 2 by themselves are enough to create something amazing…

Strutter · 2020-10-17T09:24:43.587Z

They´ve been very, very naughty but that´s not the reason for them being separated. As I´m relatively new to Elektron stuff it feels more productive to have 2 smaller setups. The A4 and AR go so well together bc of the form factor and cv ins and outs. Also the MNM and OT work extremely well together, OT being able to add trig conditions to MNM. It´s confusing to me to have more than 2 of these boxes on at once. I do use a MBP to record stuff but I tend to keep it mostly out of sight when making music and recording and just slide the analogs towards the back end of the table and put the laptop there when mixing.

DanJamesAUS · 2020-10-17T09:57:39.001Z

i have it the same 2 setups, the analogs together…
and octatrack & digitakt/tone together, i can combine them but prefer to use them this way

slawa_soloma · 2020-10-17T10:39:01.999Z

Here is my mobile Setup. I took me 2 Years to optimize it. Now I am pretty happy with it.

image3853×1925 1.55 MB

pattherocker · 2020-10-18T01:04:02.064Z

I made it completely from repurposed materials. The rack “ears” are old headers from LED tile rigging. I grabbed some M3 screws from the hardware store measured the elektron spacing and drilled some holes.

The carbon fiber right angles is a square that I cut in half to make the two L shapes. It is from the frame of an old win vision led tile, super light and strong.
I tapped the ends and bolted everything together.
Here’s a few more pics

image3024×4032 2.55 MB

image3024×4032 1.72 MB

image3024×4032 2.3 MB

image3024×4032 2.16 MB

r1n9o · 2020-10-18T01:07:12.690Z

Excellent. I’ve been trying to stay away from wood in my builds. Carbon fiber FTW!

pattherocker · 2020-10-18T01:20:15.501Z

Agreed! Was going to weld it completely from the steel stock like the ears but my welder was out of gas ( I left the valve open for two weeks lol). Had to find another option and carbon fiber was in stock