Wooden Side Panels

jbhelp · 2015-06-22T06:39:07.000Z

m3 screws , length depends on thikness of side panels. screw should go inside no more than 4mm, otherwise you are risking damaging a PCB. i will use m3 x 24 screws since I am planning to use 20mm thick side panels

Muddler · 2015-06-22T07:18:50.000Z

@jbhelp, nice! thank you so much.

whats the length from screw to screw btw?

oh, and cool avatar. is it the falcon?

jbhelp · 2015-06-22T17:55:44.000Z

""Muddler"":

@jbhelp, nice! thank you so much.

whats the length from screw to screw btw?

oh, and cool avatar. is it the falcon?

i measured as 116mm but i am not sure that this is correct since i didnt build my side panels yet. you better measure yourself
avatar is enterprise ship, modular synth room :))

klerc · 2015-06-22T19:05:12.000Z

http://www.perfectcircuitaudio.com/ergonomic-end-panels-for-elektron-boxes.html

nedavine · 2015-06-24T03:22:42.000Z

I don’t like those screw in side panals as it amkes taking the boxes out for gigs annoying (also you can’T just take one of the machines and go play in the living room). I thought about building a simple version where the machines rest on a lip so you can just plonk the machine on it. Obviously this means the side panels need an adjoining piece of wood but hey.

Muddler · 2015-06-24T04:26:16.000Z

Yeah, I’m planning on using only 15 mm boards and a fairly less drastic angle. I also want to use the plastic cover.

Anyway, I have some good wood laying around and plenty of free time in early August so I’ll give it a try. If i don’t like, I won’t use them.

Least_Useless · 2015-06-24T07:17:24.000Z

""nedavine"":

I don’t like those screw in side panals as it amkes taking the boxes out for gigs annoying (also you can’T just take one of the machines and go play in the living room). I thought about building a simple version where the machines rest on a lip so you can just plonk the machine on it. Obviously this means the side panels need an adjoining piece of wood but hey.

brada_laptopstod_svart_0094156_PE231892_S4.JPG500×500 9.52 KB

I’m using this dirty cheap laptop stand from IKEA. Not a perfect fit but it does the job beautifully.

mokonline · 2015-06-24T16:39:01.000Z

wooden stand for elektron :
free engraving

www.zerack.com

Flat · 2015-07-16T19:16:41.000Z

I’ve reluctantly added vents to my panels. Personally I hate them, but to some they have to be there (I’ve been told they don’t).

Available if you want some

Elektron_Vent_QUAD.jpg1116×840 326 KB

TS_2501 · 2015-07-16T19:53:46.000Z

""andreamilana"":

SPIKE stands holding Elektron gear:

Spike_Cenk_Sayinli_Dataline.jpg720×400 118 KB

and the New KOSMO double stand:

4_KOSMO_by_cremacaffedesign_com.jpg720×400 141 KB

16_KOSMO_by_cremacaffedesign_com.jpg720×400 133 KB

Keep on Playing!

KeepOnPlaying_Cremacaffedesign_com.jpg720×400 92.7 KB

cremacaffedesign.com

don’t mean to start a war but 60€ for some thin slices of wood is ridiculous. looks neat though. and the wooden side panels are ugly as sin. but meh… i might not be your target audience.
if you just want your gear to stand up right, have a look at the my cheap ikea hack: 11€ Elektron Stand IKEA Hack - Album on Imgur

chrome-metronome · 2015-09-08T18:07:14.000Z

""TS_2501"":

if you just want your gear to stand up right, have a look at the my cheap ikea hack: 11€ Elektron Stand IKEA Hack - Album on Imgur

Badass. Looks like a great option!

""Flat"":

I’ve reluctantly added vents to my panels. Personally I hate them, but to some they have to be there (I’ve been told they don’t).

Available if you want some

Elektron_Vent_QUAD.jpg1116×840 326 KB

These are the tidiest looking ones out there imo. How much and where?

Flat · 2015-09-08T18:47:05.000Z

[quote=““chrome-metronome””]

TS_2501:

if you just want your gear to stand up right, have a look at the my cheap ikea hack: 11€ Elektron Stand IKEA Hack - Album on Imgur

Badass. Looks like a great option!

""Flat"":

I’ve reluctantly added vents to my panels. Personally I hate them, but to some they have to be there (I’ve been told they don’t).

Available if you want some

Elektron_Vent_QUAD.jpg1116×840 326 KB

These are the tidiest looking ones out there imo. How much and where?[/quote]
here:
http://www.ebay.co.uk/itm/151806342430?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1555.l2649

chrome-metronome · 2015-09-08T22:27:37.000Z

wicked. my RYTM may have to be swapped back in Stockholm, but I have it bookmarked!

They come with a gap for ventilation too, correct?

jbhelp · 2015-09-09T14:36:56.000Z

Here is my small laser cut diy project.

sketch.jpg972×612 52.2 KB

real.jpg2048×1536 404 KB

BoBSwanS · 2015-09-10T10:20:13.000Z

Little tip for those with wooden cheeks and a wooden desk.
Buy some industrial grade sticky velcro to stop them sliding around all over the place

A small strip on the bottom of the cheeks and then a small strip on the desk and it will be solid as a rock and easily removed from the desk

jbhelp · 2015-09-10T12:02:55.000Z

I used this one:

3M_SJ5312_1.jpg800×535 31.4 KB

this is fantastic! no slipping at all and you can buy it pretty almost everywhere.
like here
http://store.moltenvoltage.com/Rubber_Feet_4_Self_Adhesive_3M_0_14_thick_x_0_p/hard_009.htm

chrome-metronome · 2015-09-10T21:34:57.000Z

""jbhelp"":

real.jpg2048×1536 404 KB

sick! do you plan on making them available to others ?

psynthetic · 2015-09-11T06:37:56.000Z

""jbhelp"":

I used this one:

3M_SJ5312_1.jpg800×535 31.4 KB

this is fantastic! no slipping at all and you can buy it pretty almost everywhere.
like here
http://store.moltenvoltage.com/Rubber_Feet_4_Self_Adhesive_3M_0_14_thick_x_0_p/hard_009.htm

Thanks for the link

jbhelp · 2015-09-11T07:41:42.000Z

""chrome-metronome"":

[quote=“jbhelp”]
real.jpg2048×1536 404 KB

sick! do you plan on making them available to others ?:D[/quote]
maybe, I am planning to add a finger-screw option for removing the side panels easily to put elektron devices in bags for gigs, also there will be different colors available. but this is all in future

guga · 2016-01-01T21:26:44.000Z

…spent few hours to hand-cut some plexiglass and make a couple of side-panels for my AR and MM