I’m having trouble with a sound pack, following the instructions here https://www.elektron.se/wp-content/uploads/2019/01/Sound_Pack_Installation_Instructions_ENG.pdf
I recently purchased a Rytm2 (currently own a Digitakt and Digitone). I also purchased my first sound pack “Divine 909”.
I transferred all the samples and the Project .syx file using the Transfer app. In the kits menu, I see “The 909, Rytm909” etc. “The 909” is loaded. So far so good.
However, in the “Divine909” project (which I created by transferring “all” from sysex as per the instructions), there don’t appear to be any patterns, or samples loaded into each sound. Hitting the pads doesn’t play sounds, and pressing [PLAY] doesn’t play any sounds, and pressing [RECORD] does not show any recorded trigs.
In the SIMPL menu, the BD, SD, RS pads are using samples “1, 30, 37” respectively. Pressing knob D (SMP) shows that no samples are loaded.
Do I need to manually load samples into each sound for this project? Or did I screw up something else? Note also I used Transfer rather than C6 to transfer the sysex file - can’t find C6 and assume Transfer has replaced it.