Turn off Track 8 Masterfx for outside source

andreasroman · 2015-02-10T08:13:21.000Z

Thanks for the advise. Unfortunately, it does affect input through the mixer. That’s how I’m using it right now, the Tempest jams directly into the Octatrack’s inputs, so I’m essentially using it as a mini mixer for the Tempest and whatever else I’m gonna put in there (thinking about a Volca Sample), and then there’s the internal tracks for the Octatrack where I put loops from other sources.

Thing is, that which is coming from the Tempest doesn’t respond so well to the Octatrack’s master fx. It sounds good, but it’s better if the Octatrack could just leave it alone

Shoki · 2015-02-10T08:13:58.000Z

Yes master track FX will be over everything as i remember.

LyingDalai · 2015-02-10T08:23:13.000Z

Can’t you use the Cue output to redirect the Tempest track once muted ?

Shoki · 2015-02-10T08:30:27.000Z

from the manual:

[ul]
[li]DIR sound won’t be affected by any of the dual FX blocks, but will be affected by the master track effects if a master track is used. Use Thru machines for affecting incoming audio with the FX blocks. [/li]
[li]If track 8 has been turned into a master track it won’t be affected by mutes. [/li]
[/ul]

andreasroman · 2015-02-10T08:53:48.000Z

Many thanks for your advise, guys.

I think I just have to live with this.

Instead of seeing it as a problem, now that I know how it works (with great help from you all), I’ll work it into the track instead of trying to figure out a way around it.

It’s not like the Tempest isn’t without its limitations as well, and I have no problem with those. So it’s all about what the tools can do, not what they can’t do.

andreasroman · 2015-02-10T08:54:37.000Z

Goddam this forum is great.

JSZ · 2015-02-10T08:55:48.000Z

Sending the Tempest to cue outputs (via a Thru track) is the solution.

glaciertree · 2015-02-10T12:55:08.000Z

I think JSZ might have the answer there, also check this other thread out: http://www.elektronauts.com/t/sidechain-effect-on-ot/6372. I have yet to try this myself. But this might allow to to do what you’re looking for. If I follow it right, you would end up with a more configurable master track.

avantronica · 2015-02-10T15:44:32.000Z

[quote=“” JSZ""]
Sending the Tempest to cue outputs (via a Thru track) is the solution.
[/quote]

""glaciertree"":

I think JSZ might have the answer there, also check this other thread out: http://www.elektronauts.com/t/sidechain-effect-on-ot/6372. I have yet to try this myself. But this might allow to to do what you’re looking for. If I follow it right, you would end up with a more configurable master track.

unless i’m missing something, why would you use two inputs and a thru track to route the audio back out two other physical outs - i’m not able to try this, so it may sound like i completely missed the point – i’m guessing though that the thru is also merged at the mains (but unaffected by fx) ! - if so then handy #OTtip , otherwise it’s an odd solution for a shortage(sorta) of mixer channels !

JSZ · 2015-02-10T16:10:30.000Z

To make full use of effects and scenes of course.

aphonix · 2015-02-10T16:28:49.000Z

I think the only way to do this would be to create a thru channel with the input from A&B then create a scene that effects all of the channels except the thru channel

avantronica · 2015-02-10T16:34:38.000Z

""JSZ"":

To make full use of effects and scenes of course.

That’s great for sure generally, but is it merged, haven’t tried (actually curious) and may not help as OP has shortage of channels to monitor

JSZ · 2015-02-10T16:37:35.000Z

I’m pretty sure you can send tracks out the cue and not have them on the main output.

JSZ · 2015-02-10T16:43:16.000Z

For example on Dataline’s “What it does” video, the kick drum and bass sound are not affected by the master delay. Them being routed out the cue is the most obvious reason for this.

aphonix · 2015-02-10T16:43:41.000Z

didn’t know cue’d tracks dont get the master FX.
I learned something today

avantronica · 2015-02-10T17:20:24.000Z

""JSZ"":

I’m pretty sure you can send tracks out the cue and not have them on the main output.

blimey, of course, that wasn’t the point made, the point was whether an unaffected cue (bypassing T8 master fx) appears at the main outs !
i’m gonna try soon to put this one to bed !

JSZ · 2015-02-10T17:26:34.000Z

""avantronica"":

[quote=“JSZ”]I’m pretty sure you can send tracks out the cue and not have them on the main output.

blimey, of course, that wasn’t the point made, the point was whether an unaffected cue (bypassing T8 master fx) appears at the main outs !
i’m gonna try soon to put this one to bed !
[/quote]
Oh sorry. That I don’t know. The headphone out can mix cue and main at least.

avantronica · 2015-02-10T17:31:17.000Z

okay - cue does not route through the main outs or the master fx

so for the OP this doesn’t help as he was short of inputs (and maybe a bit of fx, but that wasn’t the main thing)

JSZ · 2015-02-10T17:33:35.000Z

Using the headphone out would work. Or getting a small mixer.

avantronica · 2015-02-10T17:55:54.000Z

""JSZ"":

Using the headphone out would work. Or getting a small mixer.

True & Truer