Turn off Track 8 Masterfx for outside source

andreasroman · 2015-02-10T08:54:37.000Z

Goddam this forum is great.

JSZ · 2015-02-10T08:55:48.000Z

Sending the Tempest to cue outputs (via a Thru track) is the solution.

glaciertree · 2015-02-10T12:55:08.000Z

I think JSZ might have the answer there, also check this other thread out: http://www.elektronauts.com/t/sidechain-effect-on-ot/6372. I have yet to try this myself. But this might allow to to do what you’re looking for. If I follow it right, you would end up with a more configurable master track.

avantronica · 2015-02-10T15:44:32.000Z

[quote=“” JSZ""]
Sending the Tempest to cue outputs (via a Thru track) is the solution.
[/quote]

""glaciertree"":

I think JSZ might have the answer there, also check this other thread out: http://www.elektronauts.com/t/sidechain-effect-on-ot/6372. I have yet to try this myself. But this might allow to to do what you’re looking for. If I follow it right, you would end up with a more configurable master track.

unless i’m missing something, why would you use two inputs and a thru track to route the audio back out two other physical outs - i’m not able to try this, so it may sound like i completely missed the point – i’m guessing though that the thru is also merged at the mains (but unaffected by fx) ! - if so then handy #OTtip , otherwise it’s an odd solution for a shortage(sorta) of mixer channels !

JSZ · 2015-02-10T16:10:30.000Z

To make full use of effects and scenes of course.

aphonix · 2015-02-10T16:28:49.000Z

I think the only way to do this would be to create a thru channel with the input from A&B then create a scene that effects all of the channels except the thru channel

avantronica · 2015-02-10T16:34:38.000Z

""JSZ"":

To make full use of effects and scenes of course.

That’s great for sure generally, but is it merged, haven’t tried (actually curious) and may not help as OP has shortage of channels to monitor

JSZ · 2015-02-10T16:37:35.000Z

I’m pretty sure you can send tracks out the cue and not have them on the main output.

JSZ · 2015-02-10T16:43:16.000Z

For example on Dataline’s “What it does” video, the kick drum and bass sound are not affected by the master delay. Them being routed out the cue is the most obvious reason for this.

aphonix · 2015-02-10T16:43:41.000Z

didn’t know cue’d tracks dont get the master FX.
I learned something today

avantronica · 2015-02-10T17:20:24.000Z

""JSZ"":

I’m pretty sure you can send tracks out the cue and not have them on the main output.

blimey, of course, that wasn’t the point made, the point was whether an unaffected cue (bypassing T8 master fx) appears at the main outs !
i’m gonna try soon to put this one to bed !

JSZ · 2015-02-10T17:26:34.000Z

""avantronica"":

[quote=“JSZ”]I’m pretty sure you can send tracks out the cue and not have them on the main output.

blimey, of course, that wasn’t the point made, the point was whether an unaffected cue (bypassing T8 master fx) appears at the main outs !
i’m gonna try soon to put this one to bed !
[/quote]
Oh sorry. That I don’t know. The headphone out can mix cue and main at least.

avantronica · 2015-02-10T17:31:17.000Z

okay - cue does not route through the main outs or the master fx

so for the OP this doesn’t help as he was short of inputs (and maybe a bit of fx, but that wasn’t the main thing)

JSZ · 2015-02-10T17:33:35.000Z

Using the headphone out would work. Or getting a small mixer.

avantronica · 2015-02-10T17:55:54.000Z

""JSZ"":

Using the headphone out would work. Or getting a small mixer.

True & Truer

andreasroman · 2015-02-10T19:03:16.000Z

Thanks, lots of good stuff to try here now. I should mention that I’m recording directly from the OT:s main outs, so whatever approach I’ll take, audio goes out through those. I have a small mixer so if this really start to hurt, I’ll just use that.

I’m not sure that dedicating a thru channel will do the trick, since I think the Master FX track still affects what’s coming in. It’s like layering fx, but I’ll try that and see if it works.

But now that I’ve realized there’s no obvious easy fix for this, I’ve come to terms with it and instead structured which instrument plays what and shifted some performance ideas from one instrument to the other to not get around this, but make something else out of it instead.

Still, you’d think that there’s an off-switch for the Master track affecting audio in. If I remember correctly, the A4 and AKeys (though newer machines, so the comparison is perhaps not entirely fair) only applies effects to audio input if you want them to. On the other hand, I think it’s forced on the ARytm, so perhaps it’s a feature that requires much development headroom with little obvious gain.

andreasroman · 2015-02-10T19:08:16.000Z

I should mention that I’m obsessed with the idea of slimming down my rig to the equivalent of the divine proportion.

Adding a mixer would solve the problem and give me other nice options as well, but it would hurt my psyche. I would suffer, knowing that I had to throw in another device to compensate for my inability to compose amazingly genius music with only a lightbulb and a first generation iPhone.

But seriously, I’m thinking one sampler (the Octatrack) and one instrument (Tempest, for now - though it’s threatened on and off by other options) and I’d like to keep it at that.

So yes, that’s what’s sending me off on these trips to find options to make the instruments work for me in ways they weren’t intended.

debug · 2015-02-10T19:17:42.000Z

Another choice would be to use no effects on Track 8 and do all your OT scene tricks using the effects on Tracks 1-7.

You could put compression and eq if you wanted to do some mastering of Tracks 1-7 and inputs.

While it can be a bit more scene setup work, having to adjust parameters on many tracks instead of just track 8, it does give you a lot of flexibility.

andreasroman · 2015-02-10T19:37:54.000Z

That could work. I agree, even if the setup is trickier, it does open up for other interesting options once you’ve got it working.

Merlin · 2015-02-10T20:34:22.000Z

Although it doesn’t help the op, I’d like to mention that the ot’s inputs can be routed directly to the cue output. You do this by simply cueing the inputs:

Press Cue+input ab (or cd or both) and you will see the two red leds of that input flash one after the other, meaning that the input is cueued.

I, sometimes, use this when combining the ot with the MnM and the MDUW:

-MDUW comes in at input ab
-input ab is sent directly to the cue out.
-cue out is connected to MnM input
-MnM tracks are used to apply all kinds of fx to the signal
-MnM output is routed back into OT input CD

Using this setup, you can route the MD and any combination of tracks from the ot straight through the MnM’s fx and catch it back into the ot for sampling.

Watch out for feedback loops though!

M.