TM-1 alternative for loading samples to machinedrum UW

sezare56 · 2019-07-02T06:43:45.370Z

Transfert with turbo is maybe possible between AR and MD, sending sysex.

Is your MD a +Drive?

astricii · 2019-07-02T14:53:05.085Z

Tis

sezare56 · 2019-07-02T18:50:38.332Z

Tis means it is? UW MKII + Drive?
In that case, I guess you want to tranfer more than 2.5 MB…?

TM-1 alternative for loading samples to machinedrum UW Other Gear

I use to use my Motu Microlite to transfer samples to the Machinedrum, but sold it awhile back. Anybody know if this would work. C6 transfer > USB midi > Digitone > din midi > Machinedrum , for transferring? Basically using the Digitone as a middle man. I doubt it would work, just curious if anybody has tried passing data through a device for transfer to another

astricii · 2019-07-02T19:25:34.114Z

Correct

PeterHanes · 2019-07-02T20:41:12.922Z

Turbo sample loading sans tm-1?

Has there ever been a way of using the turbo capabilities of the other machines like analogs or digis as a usb turbo midi interface?

As far as I know, none of the Elektron instruments pass USB-MIDI input to DIN-MIDI output.

astricii · 2019-07-02T20:52:12.938Z

Ballz thanks

sezare56 · 2019-07-02T20:58:32.450Z

I’m curious if AR can send samples to MD with Turbo midi! (Without USB)

astricii · 2019-07-03T00:12:56.931Z

I don’t believe it has any file send ability in its sysex dump menu

sezare56 · 2019-07-03T00:37:05.361Z

astricii:

I don’t believe it has any file send ability in its sysex dump menu

You’re apparently right. MD can turbo send it’s recordings to AR maybe…

PeterHanes · 2019-07-03T00:42:18.140Z

sezare56:

MD can turbo send it’s recordings to AR maybe…

Definitely. A few people here were using MD as a sampling front end for AR MkI.

Am I the only one? [Machinedrum love] Machinedrum

I asked Elektron… immediately got an answer! can the MD send a sample via Midi to the AR ? Elektron Support | April 19, 2016 11:08:10 AM Hi there, Yes it can. Regards, Fred

birdster · 2020-01-03T18:18:39.488Z

have you ever tried it? does it work? i‘m in a pretty similar situation right now, haha

Cepheid · 2020-01-03T20:11:36.441Z

I never tried it as I purchased a new interface that has midi to usb capabilities (motu ultralite mk3)

cammcguffs · 2024-01-09T18:55:28.974Z

I have a non +drive machinedrum and the time to load snapshots takes forever. Can’t find any TM-1 or any alternative online.

Any suggestions ?

theobserver · 2024-01-09T21:16:05.919Z

as far as i know snapshots are only available to md’s that have the +drive, like when you go to global settings then down to file, do you see a section that says +drive ? also do you have UW?

synthbie · 2024-01-09T22:13:01.236Z

The Megacommand.live supports Turbo MIDI as far as I can read. It seems it can also somewhat function as a replacement for the +drive?

I could be wrong though.

Dibek · 2024-01-09T22:21:45.185Z

A long time ago, on Elektronauts, someone attempted to clone the +Drive. Just dropping this here hoping someone capable feels inspired to do it for real

chiasticon · 2024-01-10T00:04:57.178Z

I was in this boat a few months ago with my MDUW. I placed a WTB here and found a TM-1 within a couple days. try that, and hopefully you have similar luck!

synthbie · 2024-01-10T09:21:53.089Z

Out of curiosity - does the TM-1 work with anything but C6?

/Thomas

cema · 2024-01-10T09:32:00.731Z

Yes, TM-1 is a class compliant device - works as a standard MIDI interface.

synthbie · 2024-01-10T11:54:22.177Z

But will TurboMidi work with e.g. SysEx Librarian?