That RYTM 1.70 Sound

Perseus_Traxx · 2025-01-13T17:54:44.695Z

I’ve been getting things together for a gig over in Manchester…
Digitone, Tetra and RYTM II.
Though I play a lot of disco, the music I make and release is mainly inspired by years of listening to Detroit and Chicago House and Techno…

JohnnyEgo · 2025-01-23T08:22:57.615Z

it’s time to mention the great ability to route USB audio thru different tracks and even better, to split the L/R digital audio over two tracks simultaneously.

it’s a great Analog route for the OP-1 for instance, using the filter, VCAs, fx, compressor and such, I do love the fact that the pad (track) picks up the Audio and visualizes it with light, great implementation of levels up to +18db and the „new“ tuning makes some layering with analog machines a breeze.

I think a TX6 can therefore be a good match and AH+FX is now in a far far distance, because it’s more integrated on rytm and a similar Analog channel strip

bgEN · 2025-01-25T03:51:28.498Z

I keep forgetting about this… got any audio examples? This is the SOUND thread, we wanna hear it!

phading · 2025-01-27T11:12:47.485Z

dfunk1983 · 2025-01-27T14:26:40.076Z

These are awesome!

DonovanDwyer · 2025-01-27T15:01:41.795Z

Awesome. All synthesis?

johngredin · 2025-01-27T17:24:22.578Z

Sounds truly dope

HoojerBob · 2025-01-28T09:14:45.022Z

More!

phading · 2025-02-03T22:43:49.768Z

2 more,

bgEN · 2025-02-04T02:44:18.203Z

I, uh, have no real idea what you’re doing here.

based on the title, is it multiple dvco tracks going at the same time? but how are you getting one track to trigger another… some kind of NEI use? or are you triggering it from an external keyboard set up to trigger many channels simultaneously?

the way 12216xdvco is played it sound like there’s an external keyboard…

are there samples involved?

TELL US WHAT IS HAPPENING.

(in case i’m not being clear, i think this is really dynamite stuff.)

Skorheim · 2025-02-04T05:12:42.671Z

Yeah, I second this, what is happening here?

treat · 2025-02-04T20:22:53.569Z

some low effort rytm programming…

Roman01 · 2025-02-17T18:28:23.241Z

Just dropping a couple beats in here. It’s a mix of samples and rytm synths. I forget which ones, but I mainly use the kicks and DVCO and some hats. I was feeling lazy and didn’t want to incorporate any other boxes, so all Rytm here except for the Pusha-T vocals, which I recorded into the Octatrack last minute. Hope y’all are doing well out there.

acidk · 2025-02-23T20:54:06.165Z

First Analog Rytm test-drive using the SID-Chip machine - being sent through the Roland RE-201 Space Echo plus reverb added on 1010 BlueBox.
(The more I use the BlueBox reverb, the more I appreciate it - pretty decent in my eyes).

I really wish the SID machines would also be added on the A4…

Other AR-channels were routed through the BOSS KM-60 to add saturation and grit.
Dual VCO used for basslines.
Recorded live in a single take directly to 1010 BlueBox.
Audio reactive nodes used on Erogenous Tones Structure for visuals.

matteblacksmoke · 2025-03-05T21:07:19.299Z

bgEN:

I heard a youtuber who really should have known better say that the only use for the IMPULSE machine was for click tracks for clock sync. Good grief.

I remember hearing someone on youtube say this once and it surprised me. Impulse sounds great even completely dry!

bgEN · 2025-03-10T05:01:05.095Z

I call this trick
JUMPIN AND PUMPIN

On the compressor page, set: THR 82, ATK 10, REL A1, MUP 40, RAT 1:2, SEQ=HIT, MIX 95, and finally, most importantly, VOL to a low value like 50.

On your FX track, set the LFO MOD to ONE and the WAV to Exponential. Set SPH to just about 14 or so, because we don’t want full exponential. It will be too painful. Yes. Because we’re setting DST to COMPRESOR VOL. at a DEP of like +80. Yep. BAM BAM BAM.

Put trigs on your FX track on the places where you want accented transients, like on the 1 5 9 13 or whereever.

I did this cause I was jealous, maybe even envious, of that punchy 606 sound. So punchy with the transients all lined up. Well, I figured I could just get all my transients to line up alright, the hard way.

I think it worked, you tell me.

Samples: 606 from Mars, Rockers vocal, my Minilogue.

Anigbrowl · 2025-03-11T07:12:20.656Z

Dropping this in here cause I was kinda amazed at how good this sounded with just a few elements and recorded from the overbridge application with no plugins or editing.

Share your tunes (Part 2) Our Music

I got an Analog Rytm mk1 last week - thanks @thoughtstarZ! Anyway recorded this (very) minimal techno jam this evening. Played live with no editing, just some soft limiting to boost the final volume. [Cyclade 0 2]

Roman01 · 2025-06-08T17:43:50.189Z

Bumping this thread and bumping my mix. I’m still on 1.70, so I guess this makes sense.
Hope all is well out there on Rytmland. Yeah, this got a little help from my Digitakt, but it’s 95% Rytm, the best damn drum machine/ sampler in my opinion.

ThomasJ · 2025-06-15T18:33:47.488Z

Great to hear all the different ways people are using the new machines!

I made a new SY CHIP challenge for myself, trying to make a more “recent” (1991) C64 SID song on the Rytm. Here goes “Water” from Last Ninja 3 (composed by Reyn Ouwehand)

Speldosa · 2025-07-24T20:34:59.990Z

I (re)bought the Analog Rytm right after the 1.70 update dropped, but before I really got a chance to use it, the Syntakt was updated with many of the features I was exited about in 1.70, so I haven’t really used the Rytm that much after buying it.

About a week ago, I was going to sell it, so I set it up for the buyer to try out, but he never showed up, meaning I played around with the Rytm a bit since it was hooked up. Long story short, it really is quite a cool machine that has some unique selling points (for example, the macro function), and I ended up deciding to delist and keep it for now

Here’s the track that I eventually created that day: