Teenage Engineering TP-7 Tape recorder

SPisfunbutalsodifficult · 2025-05-21T16:52:06.433Z

macropod:

but given the price & promise I enquired

Exactly

SPisfunbutalsodifficult · 2025-05-21T17:33:57.423Z

@schoolbabyboy

This is music to my ears.

I have considered getting the T7 ( love the design) but it is too expensive for what it does <> my needs.

I’ve got a M8 on the way though.
How do you use the M8 as a T7
As a stem player ?

instantjuggler · 2025-05-21T18:48:10.784Z

good to confirm all this. it drives me crazy when TE or anyone else tries to say that some sort of wheel noise is to be expected. its totally not!!! its not ok, its not a thing that will come and go over time. you can absolutely get a silent tp.-7. i went through 3 myself. its crazy, the PR spin after the fact to try and say that the design is meant to cause some noise. just makes no sense.

schoolbabyboy · 2025-05-21T20:03:59.613Z

i mainly wanted the tp7 to record my tunes that i make in parks along with the ambient noise of the parks. the M8 records in 32-bit so when i want to record ambient sounds directly to the M8 i plug my zoom h1e into the input and use it as an external microphone to get a bump up from the internal mic.

i have used it for shorter stems as well but thats not really my main use case. i know lots of people like to use it that way though.

SPisfunbutalsodifficult · 2025-05-21T20:27:18.178Z

@schoolbabyboy

Thank you - great way to use it

Ottava · 2025-05-26T16:15:35.528Z

I would love to have a noise gate option for the inputs as well as the built in mic. I often record longer jam sessions and it would be so helpful to be able to speak into a mic to give details about gear/patches being used, but without having the room ambience recorded the whole time. A gate would also be handy for directly connecting older/noiser pieces of gear.

Happyanimal · 2025-05-28T12:42:49.062Z

So how were you able to navigate that return process with TE, because this is their response to my request when submitting a support ticket directly to them-

‘Thank you for contacting us!

the clicking sound that you hear is due to the moving parts inside the bearing mechanism facilitating the rotation of the wheel. as the TP–7 is a mechanical device, there will always be a degree of mechanical noise picked up when recording with the internal mic.

if you want, there is the option to turn the motor off (enter the menu>motor>spin the wheel to X).

if you feel like the sounds are above what is normal (as described above), please feel free to send us a video of your device and we can assess further ’

flos · 2025-05-28T12:48:39.395Z

Same thing happened to me, got the same e-mail. Just sent in a video of the wheel wobbling when playing and sound of the wheel in play mode and fast-forward. Received a new one after some more back and forth. New one has minimal sound, you can hear it when putting you ear next to the wheel but otherwise not. Hope you get a replacement, it’s a fantastic device!

ptomaselli · 2025-05-28T14:01:12.804Z

It’s been mentioned before, and maybe this is obvious, but I think it’s possible for the shiny center of the wheel to become loose (it seems to essentially just screw on).

I’ve never taken mine completely off, but it might be worth checking if yours is loose and if so, gently encouraging it to tighten back up?

I’m unsure if the wheel comes completely off if the center portion is removed, but as it seems to simply screw on, this could be worth a try. I was able to tighten mine just with very gentle downward pressure with a finger and turning it until it became completely flush again.

LyingDalai · 2025-06-09T22:52:19.089Z

29 posts were split to a new topic: Frustration

LyingDalai · 2025-06-10T12:31:19.582Z

6 posts were merged into an existing topic: Frustration with TE support

highstandards · 2025-06-10T15:00:26.805Z

v1.1.9

mp3 support
option for separate memo folder
mixdown mode using TX–6

teenage engineering

TP–7 guide

field tape recorder

https://teenage.engineering/downloads/tp-7
https://teenage.engineering/_software/tp-7/tp-7_firmware_1_1_9.tfw

modulpaule · 2025-06-10T15:10:19.705Z

IMG_60121179×1572 158 KB

The mixdown feature is great.

LyingDalai · 2025-06-10T19:25:33.751Z

7 posts were merged into an existing topic: Frustration with TE support

Nejben77 · 2025-06-13T15:27:55.887Z

I requested this feature few months ago. Fantastic!

Edit: just tried this and worked flawlessly recording knob movement and fx changes, except after 3.32 minutes there was a sort of system crash in TX-6 with loud whine. Had to power of both, TX-6 took a few moments to reset. Anyone else been able to test this over the length of a recording?

jones79 · 2025-06-17T09:34:55.613Z

The new black version looks so nice

Im hoping TE will make this one part of their discount experiment

I like the idea of taking one on holidays and recording bits…Is there a good hard storage case for it?

Goofaman · 2025-07-04T19:44:12.030Z

New firmware update v1.1.10 out today

fix usb audio glitches
enable reel, rocker and reverse playback in mixdown mode

instantjuggler · 2025-07-05T00:59:29.650Z

sorry, hold up! does this mean that you can now record “scratching” with the wheel if you route the output through the tx-6 back into the tp-7 with mixdown mode???

Colorsinspace1 · 2025-07-05T04:05:55.914Z

That would be sick. I’ll check it out later…

jamrod · 2025-09-17T17:11:29.395Z

Heads up for anyone interested: selling a motor click-free TP-7 over in this thread.

Still love the TP-7, just have other expenses at the moment.