Syntakt vs MC-101?

bibenu · 2023-02-12T11:37:12.103Z

bibenu:

Will explore that on MC-101/M:C before making Syntakt purchase decision.

Interesting, so the M:C is fine for driving MC-101 clip changes. Will even select empty clips and ‘play’ them. It also works with scene changes. I wonder what makes the syntakt different ?

EDIT: I even tried messing with the scale and length and PTN versus TRK (which are known to mess up sync between M:S and M:C) and the MC-101 made sense of it and changed at the same time as the M:C.

djenzyme · 2023-02-12T11:46:50.830Z

FWIW I have had the 101 changing patterns perfectly with Elektrons. Can’t remember the exact settings but its totally possible. Be sure to use the ‘scene change’ method rather than ‘clip change’, and it should be good. You can define the play length within clips which may also help.

This is in stark contrast to the TR6S which seems to cause problems with whatever its connected to… even TR6S and MC101 together don’t always play nicely

djst · 2023-02-12T13:07:24.020Z

djenzyme:

Be sure to use the ‘scene change’ method rather than ‘clip change’, and it should be good.

What does this mean exactly? The Syntakt can only set a PC message, is there a setting that determines how they are interpreted on the MC-101?

bibenu · 2023-02-12T13:23:27.438Z

Two different midi channels on the MC-101. There’s a per-track receive channel for clip changes, and ‘control channel’ for scene changes.

djenzyme · 2023-02-12T13:55:38.993Z

bibenu:

There’s a per-track receive channel for clip changes, and ‘control channel’ for scene changes.

Exactly that. I found the scene change method to be better with Elektrons.

krunchr · 2023-02-12T15:49:05.784Z

Great video! I agree with you to a large extent. That both devices can only be compared partially, you have mentioned several times. All in all, I think the comparison is fair from your point of view.

I myself own the MC-101 and the Digitakt. I have made the experience that the Digitakt always pushes me in a certain musical direction. At the end of the day, my results are always very “technoid” tracks.

Interestingly, this is not the case if I use the MC-101 only. Maybe because of the countless presets inside the MC-101, but also because of the special way you create/manipulate patterns when using Elektron sequencers.

Bahm · 2023-02-12T17:57:43.477Z

Sell em both and get a 707. It’s still menudiving to edit sounds.

bibenu · 2023-02-12T21:59:51.723Z

bibenu:

Will explore that on MC-101/M:C before making Syntakt purchase decision.

WIth MC-101 driving scene changes on the M:C (via midi PC, control channel) the story isn’t so good. Manual scene changes transmit fine. Automated scene changes (by setting length and chain: on) not only don’t complete the change, they put the M:C into a weird state where it looks like it’s halfway through building a chain. Need either a M:C power cycle or complete project swap to clear that.

So I can’t use the MC-101’s ‘song mode’ to drive the M:C or M:S. Shame.

djst · 2023-02-13T07:18:04.576Z

bibenu:

Two different midi channels on the MC-101. There’s a per-track receive channel for clip changes, and ‘control channel’ for scene changes.

Aha, that explains why that setting was there. So, using that means it will change scenes on time with the pattern change on the Syntakt? It’s a shame you have to waste another Syntakt track for it though, since there’s no way to parameter lock the midi channel. So basically you’d have to devote one of the 12 tracks just to control scene changes. Not worth it in my opinion, I’d rather just change scenes manually or parameter lock the clip changes. I just wish clip change PC messaged could be sent a little earlier so the MC-101 would pick them up in time.

djst · 2023-02-13T07:22:04.001Z

krunchr:

Great video! I agree with you to a large extent. That both devices can only be compared partially, you have mentioned several times. All in all, I think the comparison is fair from your point of view.

Really appreciate the feedback! I really love both for different reasons, but I definitely have a favorite if I could only keep one. But fortunately I can keep both!

krunchr:

I myself own the MC-101 and the Digitakt. I have made the experience that the Digitakt always pushes me in a certain musical direction. At the end of the day, my results are always very “technoid” tracks.

Interestingly, this is not the case if I use the MC-101 only. Maybe because of the countless presets inside the MC-101, but also because of the special way you create/manipulate patterns when using Elektron sequencers.

I can only agree here. There’s definitely a bit of a “techno bias” built into the Elektron sequencer and the MC-101 is more open ended in that regard because it’s more about how the sound presets inspire you.

I just recorded a jam featuring both the Syntakt and the MC-101 playing together. It led to a genre I have never explored before! Will be publishing the jam this week on the channel.

Unifono · 2023-02-13T07:32:02.323Z

reeloy:

…u really can’t decide between another ripoff japanese zombie toy made in china tryin’ hard on retrofitting once again OR a dead serious and unique modern music instrument made in europe …!?

I actually prefer the mc101 over the digitone in a groovebox context…

bibenu · 2023-02-13T09:15:14.282Z

djst:

It’s a shame you have to waste another Syntakt track for it though, since there’s no way to parameter lock the midi channel.

No wasted channels or parameter locks here. The way I anticipate using the M:C (possibly later the Syntakt) together is the PCH out channel of the M:C sending to the control channel of the MC-101 driving scene changes. Then, I accept that A01 on the M:C is always scene 1-1 of the MC-101, A02 is always scene 1-2, etc, and then set up my scenes to change to the desired clips for A01, A02 etc.

djst:

I just wish clip change PC messaged could be sent a little earlier so the MC-101 would pick them up in time.

Yeah, not sure what the problem is there. Here, with M:C sending to MC-101, that works fine, MC-101 does exactly what it’s supposed to. Maybe the syntakt is different.

djst · 2023-02-13T09:20:03.290Z

bibenu:

No wasted channels or parameter locks here. The way I anticipate using the M:C (possibly later the Syntakt) together is the PCH out channel of the M:C sending to the control channel of the MC-101 driving scene changes. Then, I accept that A01 on the M:C is always scene 1-1 of the MC-101, A02 is always scene 1-2, etc, and then set up my scenes to change to the desired clips for A01, A02 etc.

I’m not familiar enough with this topic, but if you’re saying that the Syntakt/M:C will send out general PC messages even if no dedicated Midi “machine/track” is set up, and that the MC-101 picks that up and interprets it as scene change messages, then that sounds great. I assumed you had to actually activate a midi machine track for the Syntakt to send those messages out, since that’s where you configure the PC messages.

bibenu · 2023-02-13T09:30:10.673Z

djst:

you’re saying that the Syntakt/M:C will send out general PC messages even if no dedicated Midi “machine/track” is set up,

Yes, the M:C and M:S at least send out PC messages for every pattern change. They are fixed numbers for each pattern. I’m pretty sure that applies to the digi boxes too.

djst · 2023-02-15T18:44:12.574Z

djst:

I can only agree here. There’s definitely a bit of a “techno bias” built into the Elektron sequencer and the MC-101 is more open ended in that regard because it’s more about how the sound presets inspire you.

I just recorded a jam featuring both the Syntakt and the MC-101 playing together. It led to a genre I have never explored before! Will be publishing the jam this week on the channel.

Here’s the jam I mentioned. Perhaps it can work as proof that they play nicely together and lead to different genre explorations than techno.

krunchr · 2023-02-15T18:55:03.450Z

Thanks for finally pulling off the protective sheet. Even though I would have liked to do this job for you. I am addicted to peeling off such foils.

djst · 2023-02-15T18:59:44.333Z

I’ll admit it felt special to do it. The Syntakt is definitely a keeper.

djenzyme · 2023-02-15T23:00:18.052Z

Great jam! I just saw it on Facebook earlier, these two boxes really complement each other.

djst · 2023-02-15T23:31:10.836Z

Thank you! Yes, they’re an excellent combo and pretty much all that I need to make music.

edo9330 · 2024-09-13T17:56:57.573Z

Good evening everyone, I’m reopening the discussion to ask for some information. I decided to take a mc101 to combine with the Digitakt and use it with a sound module, sequencing it from the DT. I only had a doubt regarding the possibility of choosing/defining the sound directly from the DT. Do I have how to map the MC 101 patch directly from the pattern sequenced in DT, or for example by changing the pattern does it always remain the same sound on the MC101 and do I have to change it manually? I had read that I can set the different clips with each different patch, but I wanted to understand if there was an immediate way by changing the pattern the MC101 patch also changes.

Thank you!