Syntakt vs MC-101?

djst · 2022-11-19T09:28:17.832Z

chaocrator:

for me, Syntakt and MC-101 have very little in common, so complement each other very well

Yeah, I agree. The premise of the thread was that I wanted to choose one of the two, but I’m beginning to realize that’s a tough choice.

djst · 2022-12-29T18:41:47.426Z

Finally got around to making a video of this dilemma of mine. Hope it’s useful to someone.

Bunker · 2022-12-30T18:45:19.652Z

djst:

I have to mess with two devices and interconnected cables and stuff, I can might as well just go straight to the studio and DAW.

I know exactly what you mean. For me it was Digitone for programming parts and presets but the 4 parts was limiting for what I wanted to do. I got the MPC Live 2 sometime later and I’ve found that’s the best solution for me. I can sample in my hardware synths and get full songs structured fairly quickly. I’ve not updated mine but I believe there’s a load more native soft synths and fx with the latest os. I’ve still got my DN as I couldn’t be without an Elektron sequencer of some kind

I keep being drawn to the 101/707 for the zencore stuff to be fair.

djst · 2022-12-30T22:07:42.641Z

Sounds like we’re on similar paths! Now I’m back in the groovebox camp again though, and currently my fellow musician/friend is learning how to navigate the MC-101, so there’s a chance we’ll be doing jams with two devices after all. I still don’t enjoy the cables and I prefer to curl up in bed to jam in one box, but I find the Syntakt to be so inspiring and less linear than the MPC, so despite how well-rounded the MPC is, it’s more like sitting with a DAW in a box to me.

Bunker:

I keep being drawn to the 101/707 for the zencore stuff to be fair.

Yeah it’s hard not to love those sounds and that chorus. That’s the main draw for me when it comes to the 101. It fills the gaps of the Syntakt nicely: lush pads and sample playback.

bibenu · 2023-02-11T12:43:38.230Z

djst:

we’ll be doing jams with two devices

Interested in how the two machines (MC-101 and syntakt) might work together regarding pattern changes (midi PC), i.e.

scenes/clips on the MC-101 driving pattern changes on the syntakt, or
song mode and or pattern chains on the syntakt driving clip/scene changes on the MC-101

Have a vague suspicion the former wouldn’t work.

djst · 2023-02-11T13:05:31.008Z

I’ve tried with PC messages from the Syntakt to the MC-101. It’s the usual problem that the PC settings of the Syntakt pattern itself is sent too late, so the MC-101 changes its clip one loop later. I really don’t know why Elektron can’t offer a setting to send the PC message half a bar earlier as an option.

The workaround is to send the PC message as a trigless p-lock trig somewhere at the last bar of the Syntakt pattern. This requires you to plan ahead and know when you want to change clip. I guess you could use the Fill condition so you basically hold down the Page button when you’re ready to change clip.

bibenu · 2023-02-11T13:15:17.474Z

djst:

don’t know why Elektron can’t offer a setting to send the PC message half a bar earlier

That’s interesting, because I’ve checked what my M:C sends, and it does send PC earlier, but within the last step (something like 60% through the step ISTR). Will explore that on MC-101/M:C before making Syntakt purchase decision.

Nice tip on the fill condition.

djst · 2023-02-11T13:17:49.350Z

How do you check when the PC message is sent? I don’t know, maybe the Syntakt sends it earlier too then, I wouldn’t know. All I know is that the MC-101 doesn’t pick the change up until after it has looped its clip one last time. What happens is that the clip starts to blink, indicating that it’s received the message and is cueing up the change, and then it changes after two bars (which I guess is the default length for the clip, not sure).

I wish the timing of the PC message transmission was configurable on the Syntakt.

bibenu · 2023-02-11T13:20:48.553Z

djst:

How do you check when the PC message is sent?

I have a midi utility app on my ipad and iphone. “MIDI wrench”

djst · 2023-02-11T13:23:29.130Z

Cool. It could be that the MC-101 requires more of a heads up then. Either way, a configurable “heads up” length would be incredible helpful. Like an option between:

A full bar prior
1/4 prior
1/16 prior
1/32 prior
Right at the pattern change

bibenu · 2023-02-12T11:37:12.103Z

bibenu:

Will explore that on MC-101/M:C before making Syntakt purchase decision.

Interesting, so the M:C is fine for driving MC-101 clip changes. Will even select empty clips and ‘play’ them. It also works with scene changes. I wonder what makes the syntakt different ?

EDIT: I even tried messing with the scale and length and PTN versus TRK (which are known to mess up sync between M:S and M:C) and the MC-101 made sense of it and changed at the same time as the M:C.

djenzyme · 2023-02-12T11:46:50.830Z

FWIW I have had the 101 changing patterns perfectly with Elektrons. Can’t remember the exact settings but its totally possible. Be sure to use the ‘scene change’ method rather than ‘clip change’, and it should be good. You can define the play length within clips which may also help.

This is in stark contrast to the TR6S which seems to cause problems with whatever its connected to… even TR6S and MC101 together don’t always play nicely

djst · 2023-02-12T13:07:24.020Z

djenzyme:

Be sure to use the ‘scene change’ method rather than ‘clip change’, and it should be good.

What does this mean exactly? The Syntakt can only set a PC message, is there a setting that determines how they are interpreted on the MC-101?

bibenu · 2023-02-12T13:23:27.438Z

Two different midi channels on the MC-101. There’s a per-track receive channel for clip changes, and ‘control channel’ for scene changes.

djenzyme · 2023-02-12T13:55:38.993Z

bibenu:

There’s a per-track receive channel for clip changes, and ‘control channel’ for scene changes.

Exactly that. I found the scene change method to be better with Elektrons.

krunchr · 2023-02-12T15:49:05.784Z

Great video! I agree with you to a large extent. That both devices can only be compared partially, you have mentioned several times. All in all, I think the comparison is fair from your point of view.

I myself own the MC-101 and the Digitakt. I have made the experience that the Digitakt always pushes me in a certain musical direction. At the end of the day, my results are always very “technoid” tracks.

Interestingly, this is not the case if I use the MC-101 only. Maybe because of the countless presets inside the MC-101, but also because of the special way you create/manipulate patterns when using Elektron sequencers.

Bahm · 2023-02-12T17:57:43.477Z

Sell em both and get a 707. It’s still menudiving to edit sounds.

bibenu · 2023-02-12T21:59:51.723Z

bibenu:

Will explore that on MC-101/M:C before making Syntakt purchase decision.

WIth MC-101 driving scene changes on the M:C (via midi PC, control channel) the story isn’t so good. Manual scene changes transmit fine. Automated scene changes (by setting length and chain: on) not only don’t complete the change, they put the M:C into a weird state where it looks like it’s halfway through building a chain. Need either a M:C power cycle or complete project swap to clear that.

So I can’t use the MC-101’s ‘song mode’ to drive the M:C or M:S. Shame.

djst · 2023-02-13T07:18:04.576Z

bibenu:

Two different midi channels on the MC-101. There’s a per-track receive channel for clip changes, and ‘control channel’ for scene changes.

Aha, that explains why that setting was there. So, using that means it will change scenes on time with the pattern change on the Syntakt? It’s a shame you have to waste another Syntakt track for it though, since there’s no way to parameter lock the midi channel. So basically you’d have to devote one of the 12 tracks just to control scene changes. Not worth it in my opinion, I’d rather just change scenes manually or parameter lock the clip changes. I just wish clip change PC messaged could be sent a little earlier so the MC-101 would pick them up in time.

djst · 2023-02-13T07:22:04.001Z

krunchr:

Great video! I agree with you to a large extent. That both devices can only be compared partially, you have mentioned several times. All in all, I think the comparison is fair from your point of view.

Really appreciate the feedback! I really love both for different reasons, but I definitely have a favorite if I could only keep one. But fortunately I can keep both!

krunchr:

I myself own the MC-101 and the Digitakt. I have made the experience that the Digitakt always pushes me in a certain musical direction. At the end of the day, my results are always very “technoid” tracks.

Interestingly, this is not the case if I use the MC-101 only. Maybe because of the countless presets inside the MC-101, but also because of the special way you create/manipulate patterns when using Elektron sequencers.

I can only agree here. There’s definitely a bit of a “techno bias” built into the Elektron sequencer and the MC-101 is more open ended in that regard because it’s more about how the sound presets inspire you.

I just recorded a jam featuring both the Syntakt and the MC-101 playing together. It led to a genre I have never explored before! Will be publishing the jam this week on the channel.