I really need help to figure this out, I’ve looked everywhere online but I cant find a solution.
This is what I am doing:
Midi out from the Digitakt to Midi in to the beatstep pro, using a standard midi cable and arturia’s little adaptor to connect it to the beatstep pro. I set sync to MIDI in the beatstep pro and I selected clock and transport send in the digitakt.
I’ve tried messing around with arturia’s midi control centre but had no luck. Any help would be much appreciated.
Keystep pro has a sub-menu called “utility midi settings”, I can’t guarantee that the sub-menu is named the exact same in the beatstep pro, but it probably has the same name, and that’s where you want to be right now.
Scroll down in utility midi settings (or use the MCC) and select transport receive and clock receive, then you can clock and start the beatstep sequencer with the Digitakt, I assume that’s what you’re trying to do.
That’s all you’re missing, change sync back to auto and you’ll be fine.
Also make sure that you’ve enabled the dt’s midi track channel if you’re using a digitakt midi track to sequence anything but otherwise you should be good.
And double check if you use the right “little Arturia adapter” I believe there are 3 in the box. Black, grey and a white. one is for dynsync only i recall.