Stickies / MD bug

wascal · 2015-03-31T12:11:23.000Z

I use this approach to play Machinedrum patterns using midi notes on the Octatrack regularly. All the drum sounds on my MD are mapped from C-0 chromatically, and then all of the patterns are mapped from something like F-1 onwards.

Using sync, I find that the ‘double triggering’ you mention doesn’t occur if you set the note length correctly on the Octatrack midi channel. Eg; As long as the note length <= the Machinedrum pattern length then things play smoothly for me. I also use other OT midi channels to trigger additional MD drum hits on top of whatever MD patterns are being sequenced with no issues.

However - I would never ever want to go back and re-map every single pattern to a midi note again, that was boring as hell!

drone · 2015-03-31T12:17:05.000Z

Really ? I will try. It would be a good news for me. For the moment, I set the length note to inf, but I remember having tried over settings without success.

wascal · 2015-03-31T12:18:59.000Z

""drone"":

Really ? I will try. It would be a good news for me. For the moment, I set the length note to inf, but I remember having tried over settings without success.

Try setting it to 16 for a one bar loop and see if that makes a difference

drone · 2015-03-31T12:40:14.000Z

I’ve just tried. It makes a difference, but only for the patterns whose length is set globally. For the “per track” setting, the double triggering problem is still there.

ach · 2015-04-01T21:12:48.000Z

great drone
I thought i was alone.
Yes i had double triggering too but when MM freeze it seems to me that the step bounces back so I thought that I had to give more space on the MM trk.
in per track mode
at the moment seems tuned…but…
if the MD has any midi iusse …
I think the “E” should work more on OT fw…

drone · 2015-04-04T09:49:09.000Z

On the MM too there is the same problem ? I was wondering to get one, but if the double triggering pb is the same as for the MD, I will no buy one and look for another synth.

ach · 2015-04-04T11:38:41.000Z

Oh no Drone… I was thinking to trade my mint OT with another MM, but with a new sound card arrived yesterday seems changed everything, midi routing at the moment seems incredibly fluid (arp&lfo) per track too. Soon a new MM for twinset…

capitanspam · 2015-05-11T09:58:07.000Z

Hi!

First post here, I bought a MD many months ago and I realized about a blocker bug that didn’t allowed me to continue making music until the device was resetted. I sent the my MD back and they gave me a new device (both of them were B-Stock from Thomann) and that second brand new device is showing the same bug, I’m so confused, so I want to share this here to see if anybody found the same issues, and how to fix them if that’s possible.

The problem happens with the “function” function, when pressing rec, play or stop executes the second function copy,clear and paste, but the function button is not pressed.

Here is a video of the bug https://www.youtube.com/watch?v=f_bKW6j4oWc

I’ve realized that this problem mostly happens when copying pages many times (scale setup button + function + copy and then the same + paste in other page) but I’m not sure if that’s the only way to trigger that bug.

If anyone could help me I would be really thankfull. To be honest I had a really good opinion of Elektron, but after those issues (they sent me also a “fixed” machinedrum with something inside making noises when moving the device) I’m beggining to be really annoyed with them.

Cheers!

TrabanT · 2015-05-11T15:21:45.000Z

looks REALLY bad! … seems to me like the function button is stuck, or motherboard issues! …

capitanspam · 2015-05-11T22:52:54.000Z

""TrabanT"":

looks REALLY bad! … seems to me like the function button is stuck, or motherboard issues! …

Thanks for the quick reply.

I would remark that I’m so confused, they sent me one b-stock MD, I’ve found this bug, I’ve sent it back to repair, they offered me other b-stock MD device, and I’ve got the same bug.

Could anyone sheld some light here please? Thanks in advance

P/D: Unfortunately I did a factory reset and the bug stil happens.

drone · 2016-01-04T13:19:14.000Z

One year since this thread begun, and no reaction from the Elektron team. Bugs are still here. So ?

PeterHanes · 2016-01-04T13:28:18.000Z

""drone"":

One year since this thread begun, and no reaction from the Elektron team. Bugs are still here. So ?

Did you send a support request to Elektron? If so, what was their response?

drone · 2016-01-04T15:47:54.000Z

We had an exchange by mail in 2013, and Elektron aswered me this :

Hi,

I am afraid I can not promise any updates for the MD OS about this.

Cenk
Elektron

The idea of never correcting known bugs is not a good strategy.

Paega · 2016-02-24T20:28:22.000Z

Brand new MKII non UW…had it sending sync and transport to my TR-8 and noticed that when tweaking literally any parameter on the MD during playback eventually the two machines would shift out of time, more so it sounded like the TR-8’s pattern got wonky, like completely different not just out of time.

I didn’t explore it much, just switched to using the A4 as the master clock and fixed everything quick.

Didn’t seem worth an entirely new thread, but might be an issue to consider if someone wanted to use the MD as the master clock…

MXJ · 2018-05-14T07:26:16.788Z

I’ve been stuck on a similar problem for awhile now and I think I solved it. I am slaving the MD to the OT and just changing the MD patterns with a midi note, I would always get that double kick or stutter or whatever on the beginning of the loop. I found out once I changed my trig settings in MD map editor from gate to start and the length of the midi note on the OT to anything less than inf, no more dumb double kick stutter thing. I hope this helps someone because I was stuck on this shit for 2 years now.

MXJ · 2018-06-05T05:27:42.883Z

My bad actually setting up the trig settings in the MD map editor to que instead. Also make sure program change channel is on in the MD.

fastforwardrewind · 2019-09-27T20:04:36.443Z

Really close! but this has weird outcomes.

When you select QUE the pattern you trigger plays on the next bar, not on time.

Calaverasgrande · 2020-02-25T21:04:54.600Z

MK1 owner here.
Whenever I get too adventurous and try to use the inputs on my MD I always end up with a corrupt OS and must do a full wipe and restore. Losing all my work.
This happens with trigger pads and external sound sources. It is as if voltage is leaking from the inputs to the flash memory the system instructions are stored in?
Very crazy behavior. This last time I could not open tempo, global menu or song edit. Basically any window which ‘pops up’.
Empty reset got it back to working perfectly. Until the next time I forget how evil those inputs are.

Roger · 2020-11-11T06:37:12.181Z

Maybe you already thought of this but I’ve learned to just treat all pieces of hardware as “accompaniment”, that is, don’t even try to sync multiple Elektron devices pattern-for-pattern to create “scenes” a la Ableton. Give each box a set purpose and control them all manually.

That said I had success sending program changes from the MD to an MPC1000 to add long phrases on top of beats, synced to tempo. MD makes a better master than slave as it turned out… maybe try reversing the hierarchy. OT might respond better.

lapdog · 2022-11-02T07:35:54.240Z

Roger:

Give each box a set purpose and control them all manually

just read this, 2 years later, and, strangely, this basic, quite obvious, idea sat me at ease. while still possible, i feel letting go of controlling everything by midi via one device is freeing up my creativity stuck somewhere between CC’s and hexadecimals.