Sooo, I bought an Octatrack yesterday

nedavine · 2013-12-10T06:46:59.000Z

""Barfunkel"":

But the bastard doesn’t work! It just freezes when you turn it on with the CF card and when you turn it on without the card it asks for the card and then freezes when you insert it.

Any idea what’s going on? Faulty unit, broken CF card or what?

That isn’t a good start. Do you ahve another CF card or a computer that can read CF cards? Maybe a card format would help (though you will lose the pre installed samples… no biggie).

Barfunkel · 2013-12-10T06:50:30.000Z

I actually just borrowed some ancient 64MB CF card from my teacher, I’ll try it with the OT when I get home.

KrisM · 2013-12-10T07:05:44.000Z

Are… all the pins in the CF slot? >.>

<.<

.>

<.<

.>

You could also try to hold… Function? when you power up. brings up some menu whose functions I can’t entirely remember, but will let you start in demo mode or w/ out a CF card iirc. some sort of wipe option there.

Barfunkel · 2013-12-10T07:15:56.000Z

""KrisM"":

Are… all the pins in the CF slot? >.>

<.<

.>

<.<

.>

You could also try to hold… Function? when you power up. brings up some menu whose functions I can’t entirely remember, but will let you start in demo mode or w/ out a CF card iirc. some sort of wipe option there.

I’ve tried holding Function when powering up and doing a full reset, but the problem remains. I also tried the error checking procedure but it said everything is ok.

jimmypw · 2013-12-10T07:28:05.000Z

Eep, that’s annoying.

It sounds like a wonky flash card. But you would have thought (depending on how it is broken) that the OT would just not detect it rather than completely crash.

I hope you find a speedy resolution.

Barfunkel · 2013-12-10T07:31:37.000Z

""jimmypw"":

Eep, that’s annoying.

It sounds like a wonky flash card. But you would have thought (depending on how it is broken) that the OT would just not detect it rather than completely crash.

I hope you find a speedy resolution.

Well, I bought it new so replacing the unit is no problem, assuming it’s faulty. if it’s the CF card I suppose they’ll just give me a new card from the store.

BLOKE · 2013-12-10T08:40:35.000Z

I thought new OTs came with a CF card - at least mine did. Did you not get one?

Barfunkel · 2013-12-10T08:43:12.000Z

""BLOKE"":

I thought new OTs came with a CF card - at least mine did. Did you not get one?

Yeah it came with one, but it doesn’t work or the OT is broken. I’ll test it in about an hour with the CF card I borrowed.

mokomo · 2013-12-10T09:00:26.000Z

be VERY CAREFUL if you are doing a lot of inserting and removing of the CF card.

Eyeball the inside of the slot first to ensure all the pins are straight and don’t force the card in too forcefully if it is getting stuck on the way down.

Barfunkel · 2013-12-10T11:58:48.000Z

Ok, I tried it with the borrowed CF card and it seems to work flawlesly. Phew, all I need now is a need CF card.

udenjoe · 2013-12-10T14:05:21.000Z

64MB, I thought you said GB!

Did it come with the 16GB card? I’m wondering if it is an older unit that has the OS with the CF card reading problem. Try an update.

Dataline · 2013-12-10T14:16:37.000Z

OI! You need a good quality CF card with decent speed to make this machine work. Old 64Meg Cf cards and ‘cheaper’ cf card will cause issues.

avantronica · 2013-12-10T15:28:06.000Z

""Dataline"":

OI! You need a good quality CF card with decent speed to make this machine work. Old 64Meg Cf cards and ‘cheaper’ cf card will cause issues.

I had an issue with an older/small but very high quality card. I think the speed rating needs to be a minimum of 100x perhaps ! I just could not create an empty project on the old card, set worked fine, no problems for me I was just trying that card out as a test.

KrisM · 2013-12-10T17:46:10.000Z

""Dataline"":

OI! You need a good quality CF card with decent speed to make this machine work. Old 64Meg Cf cards and ‘cheaper’ cf card will cause issues.

well, it was the card that came with his OT that was DOA, he wasn’t having the problem with the 64MB card he used to verify it was in fact the original card and not the OT itself that was the problem

Pretty sure he wasn’t intending to use the 64MB card long term lol.

cortega · 2013-12-10T17:46:39.000Z

""Dataline"":

OI! You need a good quality CF card with decent speed to make this machine work. Old 64Meg Cf cards and ‘cheaper’ cf card will cause issues.

Is there any List of Cards wich are working fine ?

Skab · 2013-12-10T21:27:11.000Z

""cortega"":

[quote=“Dataline”]OI! You need a good quality CF card with decent speed to make this machine work. Old 64Meg Cf cards and ‘cheaper’ cf card will cause issues.

Is there any List of Cards wich are working fine ?[/quote]
Here you go:

elektron-users.com

Elektron-Users - - Elektron-Users

Elektron community dedicated to all things Elektron: Sidstation, Machinedrum MD SPS-1/UW, Monomachine SFX-6/60, and TurboMidi TM-1! Participate in discussions, upload and download files for Elektron instruments, and share your knowledge.

smais · 2013-12-14T00:17:02.000Z

I’m having this exact same problem with a new SanDisk Extreme UDMA 60 MB/s 32GB Compact Flash Card . Strangely though this a card that has been reported by many to be working flawlessly. I’m confused.

KrisM · 2013-12-14T00:28:11.000Z

""smais"":

I’m having this exact same problem with a new SanDisk Extreme UDMA 60 MB/s 32GB Compact Flash Card . Strangely though this a card that has been reported by many to be working flawlessly. I’m confused.

Dead On Arrival?

smais · 2013-12-14T01:21:41.000Z

""KrisM"":

[quote=“smais”]I’m having this exact same problem with a new SanDisk Extreme UDMA 60 MB/s 32GB Compact Flash Card . Strangely though this a card that has been reported by many to be working flawlessly. I’m confused.

Dead On Arrival? [/quote]
It seems to be that one of the pubs my OTs CF reader is bent. Strangely this doesn’t seem to effect my original Transcend C f card which still work. Weird huh? I made a separate thread about it: http://www.elektronauts.com/t/bent-cf-reader-pin-end-of-the-line-for-my-ot/2324

cortega · 2013-12-14T10:24:40.000Z

Thanx Skab