Rytm+Four+Minitaur....tips on how to setup and route :)

Im seconds away from ordering a Analog Rytm + Analog Four and have some spare money for a Minitaur…just wondering what would be the smartest/good way to connect all the gear together? Any suggestions? Im planning to route the audio out from my Allen & Heat DB4 mixer…thats about it :smiley:

This sounds like a very good set-up.

You should route the minitaur into the A4. So you can use the external effects.

Then the A4 into your mixer to boost up the gain.

And output of your mixer into the AR.

You can sequence the minitaur using the A4 CV outputs.

Both A4 and Ar sequencer can be sync with midi.

I you have a separate buss on you mixer you can route the AR back to your mixer and connect recording device on the tape out.

Fun times!

Thanks…sounds like a really good way of setting this up :slight_smile:
Then i can use the onboard effects/filter and loop functions on my mixer too.
My Analog Four is on the way and in a week or two i get the Rytm
Gonna start out with this and when i get a hang on it i will order the
Minitaur.

Thank U