Rytm as a groovebox?

Sleepyhead · 2023-06-04T07:34:27.344Z

The dvco’s have a special sound, but are very quirky as well (weird tracking sometimes etc). They sound unlike any other synth I’ve ever used, someone on this forum once described em as having a ‘hairy’ sound, which for whatever reason sounds right to me haha. I often mix the dvco with some single cycle waveform synth (you can mix synth/sample on a single voice on the AR. The single cycle sample synths sound amazing going through all the AR’s analog circuitry, so the dvco’s are a nice bonus, but the single cycles got you covered for amazing synth sounds without tracking issues. All the needed parameters are there (filter env, amp env, drive, fx etc).

The FX are very different between the 2 machines. The OT has 2 insert fx per track, which can be picked from a list of fx. You can also use tracks to add more fx to other tracks. Most sound kinda outdated, but they all work for what they’re meant to do, and some can get very experimental. Also, there’s 3 lfo’s per track. The AR has some standard per track insert fx (analog filter, drive, one lfo) and some global send fx (delay, reverb). Then there’s also a master comp and distortion. They sound great, but there’s limited options on all of em. The upside compared to the OT is that they’re always available and don’t take up fx slots or even tracks.

between AR and OT I agree with @min0nim: get a Rytm. But I’d still advice you to look into the ST and DT as well. They are serious machines which make the step up to an AR easy. The OT has kind of a different dna then these others, so it will be easier to learn coming from the other machines, but this will still not be a walk in the park haha.

pokk · 2023-06-04T08:30:10.029Z

Good luck on your journey.

I think it’s worth pointing out that the Rytm isn’t a drum machine, more a drum computer, which might seem splitting hairs but i think this is why I struggled with my AR for so many years. It has a lot of dna taken from classic Roland gear but unlike that Roland gear it feels very different, in that it isn’t as immediate, nor sounding as good out of the box. Most drum machines are pretty preset heavy and focus around dialled in sounds that work super well together or have huge sweet spots. I found i definitely have to get the AR setup to use it in certain ways to get better results, probably why projects and kits are popular as a useful shortcut. Once you do that though it sounds pretty damn good.

I have been doing uploads to Youtube most days with free projects, mainly to push this machine to its limits and to dig deeper why I struggled initially, and already after 54 uploads, i have shifted to enjoying this bix more and more. The videos cover a range of experimental sounds, approaches that may be useful for you to help you decide your direction to create and free projects to try out, some Google Sheet to help with setting up Keyboard tracking, which for me having grown up around techno since the 90’s, super important. I think this comes from using the SH101 so much, it’s just so useful, and the Rytm doesn’t do that out of the box, but you can set it up pretty quickly and it makes a huge difference to me.

You also mention the 909, and there is a way you can do round-robin style with samples using the LFO, which does make 909/808 samples work really well. I have posted how-tos and samples elsewhere on this forum and my Github, along with AR projects most days.

The other thing is although the AR has one LFO internal per track, you can set it up to use a track as an LFO or modulator and then use one or both of the Control In’s for more LFO’s. You can even modulate the modulator. This make it sound similar from your standard LFO to env follower style or audio modulation.

I have been playing around with sampling Korg MS20 LFO shapes and using that to modulate stuff, which i will probably share later today, sounds pretty dope.

Good luck with your choices and do share your techno when you make it.

Here are some useful links for you, and anyone else who might be lurking here.

Keyboard tracking math:

docs.google.com

Kybd tracking math

This Sheet is private

AR projects:

github.com

GitHub - sm-ll/ER: Projects from the Elektron Analog Rytm Mk2

Projects from the Elektron Analog Rytm Mk2

YouTube channel:

Round Robin setup and files:

How to do Round Robin in the Rytm Mk2 using the Sound Pool Analog Rytm

Although there are some bits online and in this forum about Round Robin, I struggle to find a clear and concise way to do this, and especially focused on the Rytm Mk2, so wanted to place some information here for others and also point to some useful sounds to help with everything. Also maybe there are other ways to do this that might be useful to add that I don’t know about or maybe I get something wrong. What is Round Robin? If you are not sure what Round Robin is, it’s basically an efficient …

Uturunku · 2023-06-04T09:40:49.625Z

If you are looking all-in-one solution than what about Dirtywave M8? It is twice cheaper than AR or OT. It is very logical and easy to use. It has 4 synth engines (macrosynth – port of MI Braids module with big mount of different types of synth engines, 4-op fm synth with different waveforms, wavesynth – 8-bit synth, hypersynth – 13 osc polyphonic synth), sampler – supports samples of any length (streams directly from sd) and can play them in a any directions including special OSC mod for using with wavetables files (sounds fat). You can easily slice samples, record samples via line in port or usb, you can use it as a midi/usb-midi sequencer with parameter locks. It can stream screen and sound via USB port. It has parameter and sound locks on each steps. Effects (chorus, delay, reverb) sounds very nice and also can be parameter locked. Multi-mode filter is a part of sound engine and it is available for all instruments (in OT filter is an effect and occupies 1 of 2 fx slots). Great little device for any genre of music. I highly recommend you to take a look at it.

Fin25 · 2023-06-04T09:43:49.833Z

7o6opk

Uturunku · 2023-06-04T10:05:38.541Z

Screen is not big, right. But thanks to this, you can carry it with you in your pocket and create music anywhere (it has a battery inside). And width of its screen is not much smaller than the screen of modern phones that suit people (and wider than OT/AR screen). Also you have 2 options:

for studio work you can connect M8 to your computer and use browser or touchDesigner to mirror m8 screen.
in the recent OS 3.1.0 update new big font support was added to UI so now you can make UI elements much bigger than before if you need.

Fin25 · 2023-06-04T10:18:15.657Z

I know, I was just taking the piss.

M8 looks really good.

Adam9 · 2023-06-04T10:19:45.850Z

Kick, snare, dual vco, clap on the bottom row

Samples gallore on the middle row, bass, guitar, stabs, strings, vocals, drum / percussion loops

Hats and cymbals on the top row

The AR can definitely make full tracks as a groove box. That craps on any roland all in one I’ve ever used.

Uturunku · 2023-06-04T10:24:03.183Z

Rytm only:

lesstalkmoredisco · 2023-06-04T15:29:36.489Z

Nice write-up @pokk

pokk:

use one or both of the Control In’s for more LFO’s. You can even modulate the modulator. This make it sound similar from your standard LFO to env follower style or audio modulation.

Curious, what are you using into the CV inputs?

pokk · 2023-06-04T17:44:13.904Z

I have been using whatever sounds i have on track 1 & 2 quite a bit, just to add some filter shape or some random destination that sounds good, i just scroll through and pick the better sounding one normally. The cool thing is it isn’t super accurate sometimes so you get nice random movement happening without needed to program it, just dial it in.

I also tried the oscillators on Dual VCO, and just started playing about with samples recently which can be tricky but definitely unique.

anthonynordge · 2023-06-04T18:41:19.525Z

cogsy:

As far as the DVCO’s, they can’t play high notes.

how high are we talking? cant go up 2 octaves from c3?

cogsy:

As far as tracking, the FM is analog, so don’t expect the pitch to track well over a large range. Meaning a fourth or fifth may not be exact, so it may sound out of tune if played with other melodic elements.

this sounds even more exciting love detuned stuff this should be no problem

anthonynordge · 2023-06-04T18:48:06.077Z

min0nim:

Many, many of us have bought the OT, only to sell it (and then buy it again). If you’re looking for Ableton in a box, it can do that…but it’s not where its strengths are. It can be overwhelming for a first timer. It’s an older box, any people get disappointed by the effects and time stretch qualities, until they understand their place and limitations.

yes thats my concern buying new gear and selling it after a short period of time which would be the OT cause of complexity and menu diving and it would be overwhelming, having in mind that i have 0 experience with gear only ableton, my friend lent me an RD9 drum machine a while back, and i was confused with all the patterns/kits/song and all of that stuff was a bit hard to understand so i guess youre right with the rytm route

min0nim:

The Rytm is probably the perfect techno all in one box. Don’t get hung up on synthesis vs samples. It takes time to get any of the synths sounding great. Lots of people use it exclusively with samples, and samples sound brilliant through Rytm. It will also work better with Ableton until you can figure out if you want/need any external effects boxes (e.g. a co presser is pretty much essential for techno), and all the individual outs will help you here too.

The Rytm is a much more complete instrument than the OT, and when you get the hang of it will allow you to combine an OT in the future in natural and exciting ways.

yeah i was thinking low of its sampling duties, but i can always use single wave cycle samples on other pads other than the dvco for higher pitches or for more variation so the so the rytm feels more complete as you said, it can sample, use samples, synthesize, and has drums pretty much everything that i need in a box other than fx which it has

thank you:D

anthonynordge · 2023-06-04T18:57:40.522Z

Sleepyhead:

The dvco’s have a special sound, but are very quirky as well (weird tracking sometimes etc). They sound unlike any other synth I’ve ever used, someone on this forum once described em as having a ‘hairy’ sound, which for whatever reason sounds right to me haha.

that sounds right to me hahaha

Sleepyhead:

I often mix the dvco with some single cycle waveform synth (you can mix synth/sample on a single voice on the AR. The single cycle sample synths sound amazing going through all the AR’s analog circuitry, so the dvco’s are a nice bonus, but the single cycles got you covered for amazing synth sounds without tracking issues. All the needed parameters are there (filter env, amp env, drive, fx etc).

this is giving me an orgasm hahahaha the ability to add single cycle waveforms like sine waves or any waves to the dvco running through some analog crisp, yum.

Sleepyhead:

The AR has some standard per track insert fx (analog filter, drive, one lfo) and some global send fx (delay, reverb). Then there’s also a master comp and distortion. They sound great, but there’s limited options on all of em.

yeah its much limited than the OT as you described, damn kinda wish it had more FX. but limitation is great right? makes you come with ideas and shapes that really sharpens your craft, so ill take it!

Sleepyhead:

between AR and OT I agree with @min0nim: get a Rytm. But I’d still advice you to look into the ST and DT as well. They are serious machines which make the step up to an AR easy. The OT has kind of a different dna then these others, so it will be easier to learn coming from the other machines, but this will still not be a walk in the park haha.

yeah i think im going with AR, maybe OT in the future but i dont want the severe complexity for a newbie to gear to kill my creativity if im going with the OT

thanks for chiming in :D!

anthonynordge · 2023-06-04T19:06:58.931Z

pokk:

Good luck on your journey.

thanks!

pokk:

I think it’s worth pointing out that the Rytm isn’t a drum machine, more a drum computer, which might seem splitting hairs but i think this is why I struggled with my AR for so many years. It has a lot of dna taken from classic Roland gear but unlike that Roland gear it feels very different, in that it isn’t as immediate, nor sounding as good out of the box. Most drum machines are pretty preset heavy and focus around dialled in sounds that work super well together or have huge sweet spots. I found i definitely have to get the AR setup to use it in certain ways to get better results, probably why projects and kits are popular as a useful shortcut. Once you do that though it sounds pretty damn good.

hmmmmm thats interesting, thats why maybe people say they dont like how the AR sounds? so it needs some sharpening and morphing into your liking and it wont sound as nice as other instruments from the get go,

pokk:

The videos cover a range of experimental sounds, approaches that may be useful for you to help you decide your direction to create and free projects to try out, some Google Sheet to help with setting up Keyboard tracking, which for me having grown up around techno since the 90’s, super important. I think this comes from using the SH101 so much, it’s just so useful, and the Rytm doesn’t do that out of the box, but you can set it up pretty quickly and it makes a huge difference to me.

wow thank you so much! ive come across your videos on youtube searching for some rytm dvco display and found your vids really cool, especially the legendary SH101 one my favorite artists use that beautiful synth, i think plenty of techno peeps also, but worth mentioning the legendary Regis and Sleeparchive absolute bombardism , thank you so much for sharing! i will be watching your vids when i get my machine haha

pokk:

You also mention the 909, and there is a way you can do round-robin style with samples using the LFO, which does make 909/808 samples work really well. I have posted how-tos and samples elsewhere on this forum and my Github, along with AR projects most days.

The other thing is although the AR has one LFO internal per track, you can set it up to use a track as an LFO or modulator and then use one or both of the Control In’s for more LFO’s. You can even modulate the modulator. This make it sound similar from your standard LFO to env follower style or audio modulation.

thank you so much for chiming in! i will be following you around on youtube and checking out your other links, it’ll help me a lot, and i appreciate your kindness to help

anthonynordge · 2023-06-04T19:13:19.883Z

Uturunku:

If you are looking all-in-one solution than what about Dirtywave M8? It is twice cheaper than AR or OT. It is very logical and easy to use. It has 4 synth engines (macrosynth – port of MI Braids module with big mount of different types of synth engines, 4-op fm synth with different waveforms, wavesynth – 8-bit synth, hypersynth – 13 osc polyphonic synth), sampler – supports samples of any length (streams directly from sd) and can play them in a any directions including special OSC mod for using with wavetables files (sounds fat). You can easily slice samples, record samples via line in port or usb, you can use it as a midi/usb-midi sequencer with parameter locks. It can stream screen and sound via USB port. It has parameter and sound locks on each steps. Effects (chorus, delay, reverb) sounds very nice and also can be parameter locked. Multi-mode filter is a part of sound engine and it is available for all instruments (in OT filter is an effect and occupies 1 of 2 fx slots). Great little device for any genre of music. I highly recommend you to take a look at it.

thanks for the recommendation, this seems like a capable box i will look more into it! . but i wanted something of elektron nature to get the handle of it and in the future incorporating it into my setup cause i wanna expand later with a modular rig, and thought maybe elektron is the way. and with the rytm i can just rest with my drum duties and build a nice focused modular, and not worry about drums and all that stuff

use the AR as a groovebox now :D! and then later maybe use it as a drum machine only when i expand with the other gear

but thanks for recommending!!

pokk · 2023-06-04T20:08:33.031Z

No worries, happy to help.

Indeed the 101 is probably my favourite synth, Robert Hood normally rocks it pretty hard, but Sleeparchive and Regis are

I’ll sort out some 101 raw waveform files to use in the Rytm soon, as it make it sound pretty nice, although the internal DUAL VCO is pretty good.

uNAQ · 2023-06-05T06:44:59.161Z

pokk:

The other thing is although the AR has one LFO internal per track, you can set it up to use a track as an LFO or modulator and then use one or both of the Control In’s for more LFO’s. You can even modulate the modulator. This make it sound similar from your standard LFO to env follower style or audio modulation.

That sounds like something i havent thought about! Could you elaborate?

alechko · 2023-06-05T08:33:20.962Z

send individual out to CV in and set the CV control to Expression mode, then hit Learn and you’ll have a modulation you can send up to 4 tracks and their params

uNAQ · 2023-06-05T09:01:06.135Z

Does that work on the mk1 too?

alechko · 2023-06-05T09:06:21.331Z

I don’t think it works on mk1 as afaik there are no CV ins on mk1, but can’t confirm as I only have mk2