Richard Devine and Dick Malibu MD MKII (BLK ED)

TRSC2015 · 2014-11-14T13:52:15.000Z

""Automux"":

[quote=“TRSC2015”][quote=“dickmalibu”]Richard Devine and his Black Machinedrum MKII custom.

Not only talented but an all around great guy !

https://twitter.com/RichardDevine/status/528204852380184577

Cool, except those ugly-ass silver colored screws around the edge. Rips the overall appeal out of it. You need to provide the faceplates with black screws man.[/quote]
Should cost you a dollar or two from Home Depot. I don’t believe they are anything fancy.[/quote]
Tell him that, not me. I’m the customer, and going to Home Depot for a few screws is ridiculous, not to mention inconvenient. Why doesn’t he just buy the black screws to match the rest of the faceplate and sell his product like that? Since we’re talking purely aesthetics here, I can’t fathom as to why he would choose silver screws which match nothing else on the faceplate.

TrabanT · 2014-11-14T15:41:28.000Z

@ DickMalibu … i should tell you , that there is a guy, and he is the customer (even though rumor has it, he never bought anything from you) … and he cannot fathom that you have a certain color of your screws, even though you aftermarket something, and it is about eastheatix

hope this makes things easier for everybody on the internet, this forum and also on planet earth …

TRSC2015 · 2014-11-14T15:53:53.000Z

""TrabanT"":

@ DickMalibu … i should tell you , that there is a guy, and he is the customer (even though rumor has it, he never bought anything from you) … and he cannot fathom that you have a certain color of your screws, even though you aftermarket something, and it is about eastheatix

hope this makes things easier for everybody on the internet, this forum and also on planet earth …

We have a douchebag in the house. Hey douchebag!

mcbeth · 2014-11-14T16:00:58.000Z

I can’t fathom as to why he would choose silver screws which match nothing else on the faceplate.

Well I’d say that the Plate comes without screws at all, and Mr. Devine choose to use the ones that were on the Machinedrum before, those ones are silver. If you don’t like silver screws, your free to paint yours or to get black ones.

Btw. i love The Plate. Looks great, i’m really thinking in getting one.

TrabanT: Really enjoyed your post, thumbs up!

mcbeth · 2014-11-14T16:15:45.000Z

Why we are at it a question for Diick Malibu I own one of the earlier analog four models and there is some of the paint coming off of the front panel and box. I have seen on your website that you offer A4 frontpanels aswell, but i could not find any photos of them. Could you link me to them, or if there are none upload one or 2 for me?

TRSC2015 · 2014-11-14T16:18:21.000Z

""mcbeth"":

I can’t fathom as to why he would choose silver screws which match nothing else on the faceplate.

Well I’d say that the Plate comes without screws at all, and Mr. Devine choose to use the ones that were on the Machinedrum before, those ones are silver. If you don’t like silver screws, your free to paint yours or to get black ones.

Btw. i love The Plate. Looks great, i’m really thinking in getting one.

TrabanT: Really enjoyed your post, thumbs up!

Well I’d say that if he provided matching colored screws, it would improve the aesthetic and overall appeal. I’m sure no one would complain if he had to increase the price by 2 dollars to cover the screws. Maybe you would, but most wouldn’t.

TRSC: Really enjoyed your honesty and the fact that you don’t kiss anyone’s ass…

mezz303 · 2014-11-14T16:59:08.000Z

It doesn’t come with any screws you have to use the original MD screws.
For $200, I dont think it’s much too ask for black ones.

TrabanT · 2014-11-14T19:23:56.000Z

""mcbeth"":

.

TrabanT: Really enjoyed your post, thumbs up!

thanks mate! i am glad my “humor” came across!

TrabanT · 2014-11-14T19:25:41.000Z

""TRSC2015"":

[quote=“TrabanT”]@ DickMalibu … i should tell you , that there is a guy, and he is the customer (even though rumor has it, he never bought anything from you) … and he cannot fathom that you have a certain color of your screws, even though you aftermarket something, and it is about eastheatix

hope this makes things easier for everybody on the internet, this forum and also on planet earth …

We have a douchebag in the house. Hey douchebag![/quote]
http://de.urbandictionary.com/define.php?term=douchebag
.
.
.
it is not okay to insult me like that! … please apologize to me … thanks in advance

dickmalibu · 2014-11-15T00:11:19.000Z

""Automux"":

[quote=“TRSC2015”][quote=“dickmalibu”]Richard Devine and his Black Machinedrum MKII custom.

Not only talented but an all around great guy !

https://twitter.com/RichardDevine/status/528204852380184577

Cool, except those ugly-ass silver colored screws around the edge. Rips the overall appeal out of it. You need to provide the faceplates with black screws man.[/quote]
Should cost you a dollar or two from Home Depot. I don’t believe they are anything fancy.[/quote]
Hi Automux. (customer)
Good to see you on the forum ! How’s the Machinedrum ?

dickmalibu · 2014-11-15T00:13:55.000Z

""TrabanT"":

@ DickMalibu … i should tell you , that there is a guy, and he is the customer (even though rumor has it, he never bought anything from you) … and he cannot fathom that you have a certain color of your screws, even though you aftermarket something, and it is about eastheatix

hope this makes things easier for everybody on the internet, this forum and also on planet earth …

TrabanT (Honorary Customer)
Always good to read your posts. As always thanks for the support !
btw
I think I heard that rumour as well LOL !!!

merriam-webster.com

Definition of CUSTOMER

one that purchases a commodity or service; an individual usually having some specified distinctive trait… See the full definition

dickmalibu · 2014-11-15T00:24:16.000Z

""mezz303"":

It doesn’t come with any screws you have to use the original MD screws.
For $200, I dont think it’s much too ask for black ones.

Actually we will at some point source out the screws provide them free of charge to prior customers as well as new customers.
And to answer your question: no it’s not too much to ask. We will do our best to have black screws when you place your order (seriously we will)

dickmalibu · 2014-11-15T00:27:51.000Z

""TrabanT"":

[quote=“TRSC2015”][quote=“TrabanT”]@ DickMalibu … i should tell you , that there is a guy, and he is the customer (even though rumor has it, he never bought anything from you) … and he cannot fathom that you have a certain color of your screws, even though you aftermarket something, and it is about eastheatix

hope this makes things easier for everybody on the internet, this forum and also on planet earth …

We have a douchebag in the house. Hey douchebag![/quote]
http://de.urbandictionary.com/define.php?term=douchebag
.
.
.
it is not okay to insult me like that! … please apologize to me … thanks in advance[/quote]
Traban T
On behalf our “customer” who to the best of our knowledge has not purchased any of our products or services we apologize

dickmalibu · 2014-11-15T00:38:29.000Z

""mcbeth"":

Why we are at it a question for Diick Malibu I own one of the earlier analog four models and there is some of the paint coming off of the front panel and box. I have seen on your website that you offer A4 frontpanels aswell, but i could not find any photos of them. Could you link me to them, or if there are none upload one or 2 for me?

Hi mcbeth,
Yes we do have A4 panels on the way. I can upload a jpeg of the art file the actual panels are not ready at this moment but the quality will be the same as all our other panels
thanks
-dm

mezz303 · 2014-11-15T06:59:17.000Z

""dickmalibu"":

[quote=“mezz303”]It doesn’t come with any screws you have to use the original MD screws.
For $200, I dont think it’s much too ask for black ones.

Actually we will at some point source out the screws provide them free of charge to prior customers as well as new customers.
And to answer your question: no it’s not too much to ask. We will do our best to have black screws when you place your order (seriously we will)

[/quote]
Thank you much appreciated. I will look forward to seeing them with my next purchase Any chance of a Monomachine plate in the future?

Also I was wondering how easy it might be to remove the window and if you have them available separately. My plate arrived with the wrong model name. Standard MD mk2 not the UW+ I ordered. This doesn’t bother me, the faceplate looks great but I was checking out the red one in your gallery and it would be nice to have a window like that. I suppose I could also just remove the window from the original if it’s easy enough.

TrabanT · 2014-11-15T07:14:24.000Z

""dickmalibu"":

[quote=“TrabanT”][quote=“TRSC2015”][quote=“TrabanT”]@ DickMalibu … i should tell you , that there is a guy, and he is the customer (even though rumor has it, he never bought anything from you) … and he cannot fathom that you have a certain color of your screws, even though you aftermarket something, and it is about eastheatix

hope this makes things easier for everybody on the internet, this forum and also on planet earth …

We have a douchebag in the house. Hey douchebag![/quote]
http://de.urbandictionary.com/define.php?term=douchebag
.
.
.
it is not okay to insult me like that! … please apologize to me … thanks in advance[/quote]
Traban T
On behalf our “customer” who to the best of our knowledge has not purchased any of our products or services we apologize [/quote]
THANKS!

Automux · 2014-11-18T17:01:19.000Z

""dickmalibu"":

[quote=“Automux”][quote=“TRSC2015”][quote=“dickmalibu”]Richard Devine and his Black Machinedrum MKII custom.

Not only talented but an all around great guy !

https://twitter.com/RichardDevine/status/528204852380184577

Cool, except those ugly-ass silver colored screws around the edge. Rips the overall appeal out of it. You need to provide the faceplates with black screws man.[/quote]
Should cost you a dollar or two from Home Depot. I don’t believe they are anything fancy.[/quote]
Hi Automux. (customer)
Good to see you on the forum ! How’s the Machinedrum ?
[/quote]
Sounding (and looking) great! My dog knocked over a speaker the other day and the MD along with those overhanging AnalogKeys key bed had a near miss. Everything survived without a scratch though.

mezz303 · 2014-11-20T03:40:55.000Z

I switched out the window. Turned out to be easy.

DSC01327.JPG1024×575 94.4 KB

Now I just need to find some grey trig buttons from somewhere.

dickmalibu · 2014-11-23T15:42:43.000Z

""mezz303"":

I switched out the window. Turned out to be easy.

DSC01327.JPG1024×575 94.4 KB

Now I just need to find some grey trig buttons from somewhere.

Looking Good !

DIY Solution:

krylon.com

Our Products | Krylon® Spray Paint

Krylon® has a robust product mix for you to choose from for your next project. Learn more about the full line-up of products today!

Lots of color options

DC_astro · 2014-11-23T16:17:28.000Z

So, when will these be available again?