Reverb issue

thatguy · 2014-03-28T13:37:51.000Z

Hey, i just got my analogue keys, so i dont know if im doing something wrong, or if its something wrong with the hardware. Hence im asking here:)

Ok, so reverb is not working properly. Or, its working, but it doesnt mix in over the sound very well. I have created a completely new sound, cleared the track, and turned the reverb mix to the top. I can hear a slight tail behind the sound. The reverb is there. However, when i go to FX to adjust the reverb volume parameter, the reverb appears in its full, while i adjust the volume knob. It huge!. But, when i stop fiddling with the volume knob, the reverb almost disappear again, back to this discrete tail, even though everything is cranked up!

Does this sound like a human error, or a hardware error?

Ihatederekreed · 2014-03-28T13:39:51.000Z

Do you have any plocks on the fx channel? Any plocks for reverb on the track channel?

thatguy · 2014-03-28T13:46:42.000Z

That might be:). What is this “plock”?

k4nsk3 · 2014-03-28T13:53:26.000Z

""thatguy"":

That might be:). What is this “plock”?

Parameter lock, it’s were you can “lock” different parameter values to a specific step in the sequencer. Maybe you have made a lock to some reverb parameter… try clearing the p-locks

Ihatederekreed · 2014-03-28T19:15:37.000Z

Plocking In live record mode is a very common newbie issue. If you have live record mode activated, anything you touch or do (pretty much anything at least) is recorded into the sequencer as parameter locks.

For instance, if you had live record activated and started tweaking the reverb parameters, you likely locked parameter locks into the fx channel.