Restore my Faith

dust_ward · 2014-04-16T07:49:17.000Z

All those youtube links in the post above are to artists that are similar to what I do.

But I guess to make a long story short I’m mostly looking for gnarly heavy nasty distorted droning bass type sounds.

dust_ward · 2014-04-16T07:51:41.000Z

yeah the Microbrute is my main synth right now for death-droning, that and the OT have become the core of my sound in the last couple months.

t · 2014-04-16T07:54:33.000Z

[quote=““dust ward””]
also this is so far the heaviest I’ve heard anyone get with the A4

but so far my efforts are not even close.
[/quote]

The guy in the video is abusing the effects pretty heavily; I’m hearing lots of reverb and delay in that one.
Here’s a tip: Create a pattern containing just a single note of the default sound. Don’t edit the sound at all. Turn up the effect sends on that tracks and then tweak the effect parameters to see what you can do with those alone. This will help you figure out how to incorporate the effects into your sound design.

Especially this kind of droning noise depends heavily on using your delay with extreme feedback settings.

Cocker · 2014-04-16T12:29:12.000Z

Experiment with the OSC 1 Feedback. It’s savage
Modulate the feedback with the OSC 2 AM and Sync
Add plenty of Drive and shape with the Filters and LFOs
Here’s a brief experiment.

Not quite droning sounds. But kind of. There is only one trig used in this. But smoother textures can easily achieved with slower, smoother LFO and ENV settings

BLOKE · 2014-04-16T12:55:50.000Z

Not trying to be a dick here at all, but maybe the OP would be better off with a monomachine instead of the A4. Just a thought - seems to me that the mono may suit what you want more than the A4 being that it is generally bonkers.

bandersong · 2014-04-16T13:17:09.000Z

[quote=““dust ward””]
also this is so far the heaviest I’ve heard anyone get with the A4

but so far my efforts are not even close.
[/quote]

This is mostly heavy because of song writing. I don’t know that that patch is particularly heavy, in fact it sounds pretty tame to me on the noise spectrum, maybe because I’m in a noise band right now but the A4 does this stuff pretty easily.
Detune the Oscillators by a lot. Make them a full semitone apart for full on evil. Run it through Chorus for stereo width and more evil. More distortion.Crank up the distortion on the filters, there’s a sweet spot in there for mayhem. Turn up the noise and run it through a lot of delay and reverb. The patch you posted seems to evolve slowly quite a bit, maybe use LFOs to modulate the filters or even just program it yourself over a slow 4 bar sequence or even longer chain.
Again, I feel this is mostly songwriting. The vocals add intensity.

science · 2014-04-16T13:30:40.000Z

Dustward, if the A4 was what you want i would have never bought it.
i don’t think that is something most of us would be interested in.

Prints · 2014-04-16T13:43:38.000Z

Check you PM

wintermute · 2014-04-16T14:38:59.000Z

[quote=““dust ward””]
Hey guys,
Check it out, I recently added an A4 and an Octatrack to my setup and holy crap do I looooove the octatrack… It’s a savage beast that fits so well with the ungodly powerelectronic/ industrial mess I make and I just love it to death.

But the A4 on the other hand… I dunno man I feel like the face it has revealed to me so far has been just a little too clean and mellow for my purposes and honestly I’ve been thinking pretty seriously of letting it go and buying a Virus B so as a last ditch attempt to get my head back in the game before I give up and just sell it off I’m reaching out to you, my fellow elektronauts, to restore my faith and prove to me that the A4 can do vicious distorted and dirty.

I know you guys are all crazy talented and I’d love to hear you put together some of the nastiest, noisiest most unusably ugly patches possible with the A4 [and some guitar pedals and whatnot if that’s how you get down] and just crush my skull with some face ripping, ribcage rattling, eye gouging, foundation cracking insanity.

heavy drones, piercing shrieks, metallic scrapes, sub bass from hell. whatever you got.

I want to believe.
[/quote]

Have you tried the extra free patch downloads from Elektron? The Richard Devine collection particularly sounds like what you’re after, Those sound packs are pretty much my go to for nasty industrial style warehouse techno sounds

http://www.elektron.se/products/analog?section=downloads

I’ve been mainly trying to make these kind of sounds, pretty heavy and distorted and it works well! (Especially the sounds at 3:00)

dust_ward · 2014-04-16T17:18:12.000Z

yeah man i’ve got a monomachine and love it.

R7 · 2014-04-16T19:31:23.000Z

Modulating the filter frequency with a LFO up into audio rates is a quick way to get screeching metallic sounds.

subq · 2014-04-17T00:52:27.000Z

""Cocker"":

Experiment with the OSC 1 Feedback. It’s savage
Modulate the feedback with the OSC 2 AM and Sync
Add plenty of Drive and shape with the Filters and LFOs
Here’s a brief experiment.

SoundCloud - Hear the world’s sounds

Not quite droning sounds. But kind of. There is only one trig used in this. But smoother textures can easily achieved with slower, smoother LFO and ENV settings

filthy, I like it!

dimi3 · 2014-04-17T01:25:05.000Z

hyakken has a max patch you can buy with a tight randomizer. I get gritty sounds from it and then tweak… If you are die to hold on.

Anigbrowl · 2014-04-17T02:09:55.000Z

[ul]
[li]Set OSC 1 to “Filter Feedback” and play around with cutoff and resonance on filter 1 for some extreme feedback effects.[/li]
[/ul]

Yeah, filter feedback on Osc1 is the key to unlocking the A4’s aggression. I agree that it does sound quite ‘polite’ by default but set up feedback and start exploring F1 resonance and drive and it can get very rough and textural. Note that overdrive often mitigates the filter resonance - a little of the distortion can go a long way, sometimes too much just leads to a loss of definition. Don’t forget to set the extended F1 resonance in the sound setup page. Also, consider using polyphony and unison for when you really need to bring the pain.

Also explore the envelopes and especially the envelope shapes. I find that envelopes and LFOs on Elektron gear often seem to be calibrated a bit differently from other synths, and don’t always yield the expected result, eg LFO depth often seems to go to 200% or more.

Finally the effects on the A4 can be overdriven from the amp screen. Turning the reverb send all the way up can lead to delicious howls and shrieks depending on the input material. I get great results with a HP filter and a lot of resonance on F2, for example.

""science"":

Dustward, if the A4 was what you want i would have never bought it.
i don’t think that is something most of us would be interested in.

I like dirt - it was a big factor in my purchase of the A4. Part of the charm of analog is the availability of nonlinearity and chaotic behavior.

subq · 2014-04-17T05:16:14.000Z

""Anigbrowl"":

[ul]
[li]Set OSC 1 to “Filter Feedback” and play around with cutoff and resonance on filter 1 for some extreme feedback effects.[/li]
[/ul]

Yeah, filter feedback on Osc1 is the key to unlocking the A4’s aggression. I agree that it does sound quite ‘polite’ by default but set up feedback and start exploring F1 resonance and drive and it can get very rough and textural. Note that overdrive often mitigates the filter resonance - a little of the distortion can go a long way, sometimes too much just leads to a loss of definition. Don’t forget to set the extended F1 resonance in the sound setup page. Also, consider using polyphony and unison for when you really need to bring the pain.

Also explore the envelopes and especially the envelope shapes. I find that envelopes and LFOs on Elektron gear often seem to be calibrated a bit differently from other synths, and don’t always yield the expected result, eg LFO depth often seems to go to 200% or more.

Finally the effects on the A4 can be overdriven from the amp screen. Turning the reverb send all the way up can lead to delicious howls and shrieks depending on the input material. I get great results with a HP filter and a lot of resonance on F2, for example.

[quote=“science”]Dustward, if the A4 was what you want i would have never bought it.
i don’t think that is something most of us would be interested in.

I like dirt - it was a big factor in my purchase of the A4. Part of the charm of analog is the availability of nonlinearity and chaotic behavior.[/quote]
^ all great tips, unison mode can growl…even if only using 2 tracks for it…I actually run that set up a lot, poly 1 and 2, unison, then feedback osc and use tracks 1 3 4…a4 is very versatile

MDM · 2014-04-17T05:27:26.000Z

i agree
the A4 sounds mellow
that’s the reason i bought it, because i dig mellow sounds
however you can do nasty things with it too
for example treating your Microbrute with the A4’s filters and LFOs
and also keeping the dry signal of the microbrute
i do this with a Minitaur and it sounds downright nasty
you can sample the A4 in your Octa and use Lofi on it etc
i wouldn’t give up on it, its a great device , and just like the octa, the secret lies in its depth of functionality, just get deeper into it and you will be surprised.
use the effects too, as if it were part of the synth engine - eg modulating the reverb with an LFO - stuff like that. Send some sampled material from your Octa into the A4 etc.
it’s not just nasty out of the box. if you want really nasty out of the box, buy a Moog Prodigy

subq · 2014-04-17T06:12:34.000Z

It’s no moog, that’s for sure…not sure I could sell my a4 though, I like its character.

If it’s not for you maybe the sub37 is worth looking into, they’ve done some things that can add lots of grit to the cream.

TrabanT · 2014-04-17T06:56:14.000Z

""subq"":

http://youtu.be/04PKfjLrXM8

It’s no moog, that’s for sure…not sure I could sell my a4 though, I like its character.

If it’s not for you maybe the sub37 is worth looking into, they’ve done some things that can add lots of grit to the cream.

can anybody tell me …at 1:11 … how would I learn to play notes like that?

@op … 2 machines at the same time is “usually” a bad idea
if you have produced a gnarly sound with the A4, which will happen eventually … check the performance mode, live record trig mangling, you can further process with fx from OT, and then push it back into the A4 inputs to add analog FX
@barfunkel …lovecraft Acid is a coooool track!

subq · 2014-04-17T17:23:00.000Z

7:40 area and 11:00 area…need to hear that combined

on the A4, no doubt on the performance mode, it is a great thing…takes a little while to set up what you want but once you have it in there, amazing what you can do with it

dust_ward · 2014-05-14T01:09:06.000Z

Oh man, just checked into this forum for the first time in a while and noticed that this got some replies i hadn’t seen.

I actually wound up trading my A4 for a Bass Station II, a Hakko fx888d soldering iron, a homebrew noise synth, and $3oo.

The Bass Station despite being mono is definitely much more in line with the kind of thick heavy dronebass I was looking for.

Thanks again to all who tried to help me out, in the end the A4 really was an awesome synth but just a little too smooth for my tastes. Still love my Octatrack and Monomachine though.