Reset CC value after pressing stop

other · 2023-04-06T21:56:39.858Z

Hello there,

I am trying to use the Octatrack to control the start and stop of Pamela’s New Workout, by sending a CC message to the Mother 32, which then sends it to PNW.

I set up an infinite ghost trigger with the maximum CC value, but the default state is 0. While everything seems to work fine during sequence playback, when I press stop (even multiple times), PNW keeps running and I have to stop it manually.

It appears that the CC value is not resetting to zero, and I can only stop PNW by slightly moving the CC knob.

Do you have any ideas on how to fix this issue?

sezare56 · 2023-04-06T22:31:13.874Z

I’d try this : Set 0 as default track value and double stop (triple while playing). It should send value 0. Plock other values.

other · 2023-04-07T05:34:44.072Z

This is my workflow – and it does not reset to zero until I turn the knob to the left

sezare56 · 2023-04-07T06:13:45.907Z

other:

press stop (even multiple times)

Ah ok sorry, I didn’t interpreted as double stop. Could you check with a midi monitor if default values are sent with double stop ?

other · 2023-04-22T06:24:41.865Z

Ok, for some reason, after a double stop Octatrack is sending CC1 with 127 value

Screenshot 2023-04-22 at 08.22.49702×550 41.2 KB

sezare56 · 2023-04-22T07:39:30.083Z

other:

Octatrack is sending CC1 with 127 value

I can’t see CC1 (ModWheel).

I can see Channel Volume, which is CC7 (normally), sent on channel 1.

Is your midi track set to channel 1 ? Midi tracks channels have to be different from audio tracks channels (Trig Ch, set in MIDI > CONTROL, you can set them to off for tests)

other · 2023-04-23T21:22:35.982Z

For some reason changing CC1 value is read as Channel Volume by Midi Monitor
I’ve made a clean project to check it once again. All Adudio tracks Midi is set to off.

midi1072×504 50.4 KB

sezare56 · 2023-04-24T03:47:03.824Z

other:

I’ve made a clean project to check it once again. All Adudio tracks Midi is set to off.

Did you set CC1 value 127 on a midi track set to channel 16 ?

I won’t be able to try this week.

other · 2023-04-24T05:56:05.631Z

sezare56:

Did you set CC1 value 127 on a midi track set to channel 16 ?

Yes – I’ve tested in on other channels and it was set t o16.

sezare56 · 2023-04-24T08:13:02.424Z

So if midi track CC1 value is 127, it seems normal…

other · 2023-04-24T08:15:40.666Z

But the default value is 0 – and after stop it’s sending 127 again.