Hi all,
Here’s something that has really been bugging me. If anyone could try these steps and tell me if they get the same result, or why it happens that would be great.
(It’s all related to the midi side of things, so have a midi device attached and start a new project)
Assign channels to MIDI T1 & T2. Can be the same channel or different, but as long as you have something connected to the midi out that will let you hear both tracks at the same time.
Go into grid recording mode and put some trigs down to play short notes on both tracks.
- Make sue the two tracks will be easily distinguishable when played together
- Make sure T2 has a trig on step 1, along with some later trigs
- Exit grid recording mode
Go into pattern settings (Function+Bank) and make the following changes to T2
- PLAYS FREE ON
- ONESHOT TRACK ON
- TRIG MODE ONE
- TRIG QUANT DIRECT
Exit pattern settings
Run the sequencer and confirm all working as expected, ie. you can hear T1 looping, and T2 plays once whenever you hit the step 10 button (J / T2)
Go back into pattern settings and change SCALE MODE from NORMAL to PER TRACK
This is where things go wrong for me 
.
Hitting the step 9 button now only plays step 1 of T2 and gets stuck there
Does that happen for you? All responses appreciated