Quadrinity connection tips Midi / Audio?

NisseJ · 2013-07-09T06:30:22.000Z

Well, i have since last week completed my Trinity to the Quadrinity but before i got the Analog Four i had no problems with how to connect them without using my little Tapco mixer but now i think i have to dig it out from the closet.

Im guessing that having my Monomachine inserted into the Machinedrum would remove the least functions from the set but i don’t know.

How would you connect the four of the for the least loss of sonic possibility?

I would also like to have some smart tips on how the best order is to have the midi connected. Now i have the Octa as a master, and it goes into the MD -> MnM -> A4 it i think it sounds tight.

It would also be handy to have the most efficient midi mapping so that i could use a midikeyboard to play melodies and enter notes more easy. On the other hand i guess the mini keyboard on the A4 could be used to control the MnM and the Octa but i don’t know.

Well, if any has some nice tips, please advice

Dataline · 2013-07-09T12:10:04.000Z

Congrats!! I personally use it like this

MIDI out from OT to - A4 - MnM - MD.

A4 Audio out OT, MnM L output to MD, MnM R output to A4. By doing this, I dont have to mess around with cables if I want to use either MD or MnM for further processing. As the inputs work monophonically on MD and A4 I dont mind having it setup like this. MD goes into the other stereo pair in the OT.

I use the OT midi sequencer to control other gear, especially MnM in poly mode

Jon9 · 2013-07-10T01:14:33.000Z

""Dataline"":

A4 Audio out OT, MnM L output to MD, MnM R output to A4. By doing this, I dont have to mess around with cables if I want to use either MD or MnM for further processing. As the inputs work monophonically on MD and A4 I dont mind having it setup like this. MD goes into the other stereo pair in the OT.

Interesting technique, I’m going to give that a try.

NisseJ · 2013-07-10T10:56:01.000Z

""Jon9"":

[quote=“Dataline”]A4 Audio out OT, MnM L output to MD, MnM R output to A4. By doing this, I dont have to mess around with cables if I want to use either MD or MnM for further processing. As the inputs work monophonically on MD and A4 I dont mind having it setup like this. MD goes into the other stereo pair in the OT.

Interesting technique, I’m going to give that a try.[/quote]
Im gonna try that too Thanks!

AdmiralBumbleBee · 2013-07-10T17:36:22.000Z

""Dataline"":

Congrats!! I personally use it like this

MIDI out from OT to - A4 - MnM - MD.

A4 Audio out OT, MnM L output to MD, MnM R output to A4. By doing this, I dont have to mess around with cables if I want to use either MD or MnM for further processing. As the inputs work monophonically on MD and A4 I dont mind having it setup like this. MD goes into the other stereo pair in the OT.

I use the OT midi sequencer to control other gear, especially MnM in poly mode

Thank you very much for replying. I am also working with a quadrinity and you’ve given me some excellent ideas.

sonyeon · 2013-07-11T10:27:16.000Z

nice! Thanks for Sharing…

sicijk · 2013-11-12T00:07:50.000Z

So…OT > QuadraThru > A4+MD+MM would work nicely and tightly?

Just going for this setup as soon as the A4 will complete this circle =)

Cenk, how do you integrate the SFX-JII (from the marvellous Guga) in your setup?

Thanks alot!!
GiGi