Possible Build Defect - Does your MM look like this?

poonti · 2014-02-12T01:42:52.000Z

I just checked and my MD has the same thing, with the 3rd led higher than the others (instead of the 1st like yours). Mind you, I bought my MD 2nd hand and is quite a few years old; I didn’t notice any uneven leds on my MnM, A4, or OT.

stratGAME · 2014-02-12T03:31:30.000Z

This is another section of the MM

photo_1_c.jpg3165×2402 713 KB

- I just got it in the mail today

should I get this serviced or do they all look like this?

tsv · 2014-02-12T03:45:37.000Z

That’s not right. They should all be the same level as the highest one. Just checked mine and they are all the same. I’d contact the dealer and get a new one.

KrisM · 2014-02-12T04:20:18.000Z

Mine are all level, OT and MnM. Although now I’m paranoid because something tiny tinkles and rattles around inside my MnM. Never been dropped or even jostled o.O

ark · 2014-02-12T04:40:59.000Z

In the photo that stratGAME posted, it’s normal for the LED indicating the currently active track to be much brighter than the others. If you press the button next to one of the other LEDs, I hope the situation changes…

guga · 2014-02-12T12:00:16.000Z

that’s not how it should look … i had a similar problem with a couple of LEDs in the pages section but my warranty had expired already when i noticed it and decided it was not going to be a major issue…get your MnM back to the shop and get it changed/fixed or ask the hq how to handle it (you may need to send it back though).

tonight · 2014-02-12T13:51:52.000Z

""KrisM"":

Mine are all level, OT and MnM. Although now I’m paranoid because something tiny tinkles and rattles around inside my MnM. Never been dropped or even jostled o.O

You should open it up if out of warranty, a loose screw could short something out and kill it!
Just be careful getting the knobs off.

stratGAME · 2014-02-12T15:12:11.000Z

Thank you for all your replies - I will get this fixed then

KrisM · 2014-02-12T21:23:33.000Z

""guga"":

that’s not how it should look … i had a similar problem with a couple of LEDs in the pages section but my warranty had expired already when i noticed it and decided it was not going to be a major issue…get your MnM back to the shop and get it changed/fixed or ask the hq how to handle it (you may need to send it back though).

My MnM is under warranty. It is definitely not a screw, it’s something tiny and plastic. I did say “tinkles” though, which can definitely be interpreted as a more a metallic sound.
I’m not spending $25 to send it in for Alex to open it up for that. If something does go wrong, well, it’s under warranty

FreeFall · 2014-02-12T22:09:10.000Z

The LEDs on both my MnM and MD are all even height.

Maybe somebody with knowledge, or Elektron for that matter, could confirm if there is any potential problem stemming from or having to do with uneven LEDs. May not be an issue at all, and you do want to start using your MNM right away!

guga · 2014-02-12T23:02:23.000Z

the main problem could simply be that the LED hasn’t been properly soldered (thus coming a bit more out than the others). dunno who does the soldering in the HQ … if there’re humans with a soldering iron in their hands doing the job, well, then this could potentially happen…machines won’t probably have issues with LEDs
it should be an easy one to fix but if you don’t have soldering skills or don’t feel like, then i suggest you bring it back to the store to get it fixed or back to HQ (but that would cost you a bit…) you don’t want to void your warranty right?

mnmin.jpg1024×595 133 KB

the black plastic things you see between the LEDs and the board are used to keep them at the proper distance from the board, perhaps the one on your MnM hasn’t been properly trimmed

guga · 2014-02-12T23:10:48.000Z

""KrisM"":

[quote=“guga”]that’s not how it should look … i had a similar problem with a couple of LEDs in the pages section but my warranty had expired already when i noticed it and decided it was not going to be a major issue…get your MnM back to the shop and get it changed/fixed or ask the hq how to handle it (you may need to send it back though).

My MnM is under warranty. It is definitely not a screw, it’s something tiny and plastic. I did say “tinkles” though, which can definitely be interpreted as a more a metallic sound.
I’m not spending $25 to send it in for Alex to open it up for that. If something does go wrong, well, it’s under warranty [/quote]
…could be one of the connectors within the box…as long as it works, there shouldn’t be issues - is it something that ‘moves’ from one side to the other within the enclosure?

stratGAME · 2014-02-12T23:44:04.000Z

""guga"":

the main problem could simply be that the LED hasn’t been properly soldered (thus coming a bit more out than the others). dunno who does the soldering in the HQ … if there’re humans with a soldering iron in their hands doing the job, well, then this could potentially happen…machines won’t probably have issues with LEDs
it should be an easy one to fix but if you don’t have soldering skills or don’t feel like, then i suggest you bring it back to the store to get it fixed or back to HQ (but that would cost you a bit…) you don’t want to void your warranty right?

mnmin.jpg1024×595 133 KB

the black plastic things you see between the LEDs and the board are used to keep them at the proper distance from the board, perhaps the one on your MnM hasn’t been properly trimmed

Thanks for this circuit board pic - gives me an idea of whats going on under the hood.

I just received it in the mail so its def under warranty - I’m really bummed that I would have to send it off to get serviced right away

I waited like 2 weeks just to get it

but on the other hand I don’t want anything to happen latter - much rather get it fixed all up right now before I fall in love.

The machine is $1K - I saved up for this - its a lot of money to me - so I really want it to look and perform as it should

… not too much to ask for

KrisM · 2014-02-13T00:37:01.000Z

""guga"":

…could be one of the connectors within the box…as long as it works, there shouldn’t be issues - is it something that ‘moves’ from one side to the other within the enclosure?

Rattles from side to side as I tilt it. It’s pretty faint, so not something large either. I didn’t even notice it until I was putting it into the two-tier stand I got from Neil Baldwin.

Cut_The_Beige_Wire · 2014-02-13T08:52:20.000Z

Interesting to hear as mine does this , bought brand new last year , I noticed it when I lifted it out of the box , but was unsure what to do about it , I think I convinced myself it was nothing serious …

Allerian · 2014-02-13T13:29:53.000Z

Well sure enough. My MnM SFX-6 has one of the scale buttons .5mm higher than the others. Took ten years of daily use + this thread to notice it.

Doesn’t matter even a little bit bro. Go make music.

stratGAME · 2014-02-13T15:30:12.000Z

""Cut_The_Beige_Wire"":

Interesting to hear as mine does this , bought brand new last year , I noticed it when I lifted it out of the box , but was unsure what to do about it , I think I convinced myself it was nothing serious …

I’m starting to convince myself too…

but

Elektron gear - besides its sequencer and unique sound is really big on aesthetics and design

guess I was a bit shocked that they let it leave the factory looking like that

The higher the price point the lower amount of defects I expect in the product line -@ $1k it should be next to perfect

But at the end of the day its not a sculpture its a music creation tool

Allerian · 2014-02-13T20:12:43.000Z

One of the most exciting aspects of using my Monomachine is the constant possibility of being cut by it. There was not a lot of deburring going on in the early days of Elektron.

KrisM · 2014-02-13T23:50:00.000Z

""Allerian"":

One of the most exciting aspects of using my Monomachine is the constant possibility of being cut by it. There was not a lot of deburring going on in the early days of Elektron.

lol.

MnMThug.JPG490×365 30.4 KB

Felt it was humorous to grab a pic from your website >.> Points to anyone that hears the guitar intro to Michael Jackson’s Beat It lol, and double points if you hear a SID/8-bit playing it!

smais · 2014-02-14T00:38:18.000Z

""Allerian"":

One of the most exciting aspects of using my Monomachine is the constant possibility of being cut by it. There was not a lot of deburring going on in the early days of Elektron.

My MD Mk1 has corners like a ninja star. I sometimes daydream about rounding them off but I also like the tough utilitarian look to the squareness.