Overbridge and Mac OS sequoia

Elektron Software
22

Yeah, we can work through this one step by one step, just need to set context for where yer at.

1 Like
23

Hey, I had the same issue.
This helped: Overbridge and Mac OS sequoia - #17 by MaxP

1 Like
24

Hallelujah :smiley:

25

I also have the same problem. Ive tried all all of the solutions in this thread but no avail :sweat:

1 Like
26

It’s not impossible thankfully!

  1. What MacOS version are you on?
  2. What OB version are you attempting with?
  3. What have you tried until this point?
  4. Have you ran the uninstaller first and restarted beforehand?
  5. Have you accepted/activated the kernel extension under security settings?
28

Hi there,

I’m writing to follow up on an issue I’ve been having with Overbridge and Sequoia 15.5.

After installing the Extension Driver and activating Overbridge mode on my Digitakt II, I get a message saying there’s no compatibility between Overbridge and Sequoia 15.5.

I reached out to support about a week ago, but unfortunately, I haven’t heard anything back yet. Would really appreciate some help here—I’m stuck and not sure how to move forward.

IMG_1047
IMG_10475712×4284 3.16 MB

29

The message relates to The os on the digitakt 2 … check your firmware is the latest. It probably isn’t

The error message seems very clear - it describes the device that has the error and the method on how to fix it.

When your device ( digitak 2) boots up - does the number match the EXACT number / letters of the latest version on the elektron website.

1 Like
30

Hi Re5et,

I’ve confirmed that my Digitakt 2 is running firmware version 1.10, and Overbridge is also the latest version. I’ll double-check everything again, and I might try uninstalling and reinstalling everything just to rule out any issues. I’ll keep you posted.

Thanks again for your help!

31

It should be 1.10A
Not 1.10

3 Likes
32

Thanks again for the tip earlier. Unfortunately, I’ve run into another issue: my Digitakt II is not being detected properly by the Overbridge Engine. It remains stuck in “Idle” status and doesn’t connect as expected.

I’ve already contacted Elektron Support, and it appears this might be a known bug in the latest version of Overbridge.