I use my OT as a master with the DN.
I noticed that every ime I double stop on the OT, it sets the volume on external inputs on max on the DN even though I saved the pattern with volume at 50.
Any idea to avoid this?
With double stop OT sends CC 123 and midi tracks CCs you set.
If you can check with a midi monitor it will be easier to find the culprit message…
Do you control DN with midi tracks ?
I didn’t set any CC specific to the double stop (is it possible ?).
I’ll have a look at the documentation but it seems strange that the OT sends by default CC resetting the volume of external inputs of the DN.
I could understand if that were not 2 boxes from the same brand but here …
Well it is…Octatrack…
Not sure if it is in the manual…
Set CCs to midi tracks, midi channel, double stop and it sends them.
Well it is…Elektron…
Quite common to control another Elektron machine by error with a CC like CC48, crossfader…
1 Like
I send from OT midi tracks to DN audio tracks. I’ll check this CC83 as iwzs using in Dual mode.
Thanx for your help!
1 Like
Check DN midi channels.
I think input settings are controlled by FX channel, maybe it is set twice…
If you don’t want to control FX or inputs it should be doable using different channels or set it to off…
1 Like