OT+Moog sub 37 midi problem

krusty4president · 2015-01-24T23:24:55.000Z

Hi. I cant figure this out, hope someone can help.
This is my setup with midi:

OTout >RYMin/RYTMthru > A4in/A4thru > Sub 37in/SUB37out > OTin

This creates two problems.

The SUB37 Arpeggio ON button starts the transport of the Octatrack
If i try to start the OT it doesnt start. Only the first sequencer button brights up solid yellow. If i turn everything off and on again i can start the octatrack until i push the sub37 arp ON button, then same thing happens againg. The ot cannot be started from the OT playbutton. Very annoying.

If i push the SUB37 arp ON button and the seq on ot starts to run and stop it on say, 11th step, and try to start from OT the 11th step lights solid but doesnt run. Strange.

This is my channel settings:
[ul]
[li]Autochannel[/li]
[li]OT: 11[/li]
[li]RYTM:14[/li]
[li]Analog4: 9[/li]
[li]SUB37 does not have autochannel but is set IN channel 16, OUT channel 9 (to be able to play the A4 which works perfectly when I set up a midichannel on the OT to 9)[/li]
[/ul]

Please help, what can be wrong here, why does the Moog start the transport on the OT even if i disable all midi tracks on the OT?

Only way to stop it is to turn all midi OUT off on the Moog, but then it obviously does not work…

krusty4president · 2015-01-24T23:44:12.000Z

Ah! Forget all of it. It was the Transport on the OT that was set to both send and receive. That seem to mess up the ot transport.
Issu was fixed by turning recieve transport off.
Lesson learned.