OT + A4 connection

avantronica · 2014-01-24T21:01:02.000Z

you can get a fairly cheap passive MIDI merger, like this, i’ve no experience or knowledge of the cost of it tho - there’s a recent thread about folk doing wonders with cheap ebay purchases of programmable 8x8 midi interfaces

subq · 2014-01-24T21:54:46.000Z

one of the reasons I use the OT is because of the superior sequencer vs the current hardware synths I’m connecting to via midi…I do a lot of sampling straight to flex on thru machines from them (then mangle from there)

with the A4 I won’t “need” to use the OT sequencer since it is the same that is what will drive a bit of a change in my set up

regardless, I prefer to use a little midi keyboard for everything

I will look into that thru box and try some of those setups mentioned once I have the A4 ordered…thanks!

subq · 2014-01-24T22:40:29.000Z

I will admit, I almost decided to get a moog sub37 (because of the sound) instead of the A4 but in the end I think an A4 would work out better for me since I happen to be one of the people who like the elektron sequencer, menus, etc etc… I am already used to using the OT and I just play music as a hobby

Uturunku · 2014-01-24T23:56:51.000Z

My first elektron box was OT but since I bought A4 I stopped using it at all. A4 is much more creative for me than OT. It allows me to think about music instead of sampling, about assigning machines on track, about loading samples to slot in sound pool, about assigning samples to track… A4 is very fun device.

Tintao · 2014-01-26T23:17:51.000Z

I think we all have different visions of the octatrack and A4 use. I use my OT as a sound designer as well i do with the A4. Samples are just a start, but i like to transform them to extreme, like i do when i start on the A4 with the basic sound.

My A4 is slave of my octatack for the midi (only the clock), and my A4 stereo output goes into OT input.

miketheman · 2014-01-27T00:00:29.000Z

""nirun"":

interesting topic

when a friend comes by and wants to jam along, I set both devices to 2 pages (32 steps) to start and we sequence things together fun because [b]each machine has its own set of parameters on the same voice (when you put them side by side it makes alot of sense)

the trigs on the OT take precedence over the A4, but when playing the A4 mini keyboard it takes precedence over everything.[/b]

pretty fun and have come up with some neat stuff.

This sounds very intriguing, would you mind to elaborate?

(I´m thinking that this might be something similar as an setup I´d like to have with my OT and NMG2…)

It would also be interesting see/hear some of this jams with this specific kind of setup if you´re able to record it in some way?

nirun · 2014-01-27T00:48:43.000Z

""miketheman"":

[quote=“nirun”]interesting topic

when a friend comes by and wants to jam along, I set both devices to 2 pages (32 steps) to start and we sequence things together fun because [b]each machine has its own set of parameters on the same voice (when you put them side by side it makes alot of sense)

the trigs on the OT take precedence over the A4, but when playing the A4 mini keyboard it takes precedence over everything.[/b]

pretty fun and have come up with some neat stuff.

This sounds very intriguing, would you mind to elaborate?

(I´m thinking that this might be something similar as an setup I´d like to have with my OT and NMG2…)

It would also be interesting see/hear some of this jams with this specific kind of setup if you´re able to record it in some way?[/quote]

Funny you ask, I typed this long convoluted paragraph about what is possible/how it sounds but erased it all because it’s much easier to explain with a video. I’ll post it here this week with some annotations and images of the midi setting screens on both devices.

DeltaPhoenix · 2014-01-27T01:13:12.000Z

This all relevant to my interests since I have both as well. Looking forward to the video.

subq · 2014-01-27T02:37:18.000Z

""Tintao"":

I think we all have different visions of the octatrack and A4 use. I use my OT as a sound designer as well i do with the A4. Samples are just a start, but i like to transform them to extreme, like i do when i start on the A4 with the basic sound.

My A4 is slave of my octatack for the midi (only the clock), and my A4 stereo output goes into OT input.

this is likely how I will start as it is similar to what I do now

midi out from OT to gear, audio out of gear into OT, sometimes I play the midi sequence on the OT and other times I play it on the gear, regardless, I generally record, then save to sample and assign

mick · 2014-02-05T15:02:20.000Z

Thanks for this thread.
I have OT, A4 and QuNexus keyboard (with his MIDI Expander).
Regarding those MIDI Solutions boxes, would be great to know which one is good for a specific task.
For example: keeping the Elektrons clock-synced, what I would like to do is play chromatically and record separately on their respective sequencers both OT and A4 through the QuNexus, setting a specific Auto Channel for each Elektron and simply changing the MIDI channel of the QuNexus on the fly according the proper Auto Channel of the machines. Is this possible and reasonable? If any MIDI Solutions external box is needed to do this, how should be placed in the MIDI chain? Thanks in advance.

subq · 2014-02-05T15:36:36.000Z

hey mick,

I was actually thinking about that exact setup…I don’t have the qunexus or the a4 yet, hopefully this month.

maybe someone could chime in if this would work but I was just thinking qunexus to midisolutions quadra thru, that gives 1 in 4 out so I could go to A4, OT and couple other synths if needed

In addition, since I have some other hardware synths that I want to sequence from the OT, I was thinking another quadra thru, OT to quadra, then gives me 4 out to go to those other synths…without the A4, I should be able to put qunexis on OT midi in on that setup as well

obviously, one of the higher end midi switches would be better because then you can define where everything goes, but using a couple midi solutions boxes would be cheap as long as it worked properly

mick · 2014-02-05T17:21:54.000Z

Yes Subq,

the QuNexus pads are very nice and are great for trigger sounds from both machines…

subq · 2014-02-05T22:20:09.000Z

I ordered my A4 today but they don’t get stock until next week so hopefully I will have it in a couple weeks.

went ahead and ordered the qunexus with the midi expander too heheh

jmoney202 · 2014-02-06T05:38:02.000Z

Regarding the QuNexus, do the Octatrack’s 8 audio tracks respond to velocity?

mick · 2014-02-06T11:23:37.000Z

I’m quite new with the Octatrack, but I’ve read something about OT velocity here:

Use external midi keyboard to play OT Octatrack

I’ve been wondering if I could use my AKAI MPK25 to play some OT track. Advantage: MPK has 2 octaves and velocity. I’m aware of the step by step MIDI in approach, but that’s not what I want. I couldn’t find anything in the manual. Thanks for your suggestions

I use QuNexus with A4 right now.

verstaerker · 2014-02-09T08:45:14.000Z

is it possible to trigger pattern changes on the A4 from the OT?

verstaerker · 2014-02-09T09:26:17.000Z

""verstaerker"":

is it possible to trigger pattern changes on the A4 from the OT?

yes with the new multi-map it’s possible to setup midi notes to trigger patterns

enryo · 2015-02-22T20:06:22.000Z

How are people routing the audio? A4 outs > Octa ins, or Octa outs > A4 ins?

What are the pros and cons of each? You lose a voice using Thru on the Octa: Is the same true for incoming audio on the A4?

PeterHanes · 2015-02-22T21:42:10.000Z

""henryoakley"":

How are people routing the audio? A4 outs > Octa ins, or Octa outs > A4 ins?

What are the pros and cons of each? You lose a voice using Thru on the Octa: Is the same true for incoming audio on the A4?

http://www.elektronauts.com/t/audio-inputs-do-they-steal-a-track/10716/87043

ak37lover · 2015-02-24T19:14:10.000Z

Also if you enable ‘receive program change’ on the A4 and ‘send program change’ on OT the A4 will automatically switch patterns when you switch pattern on the OT. This requires consistent pattern number matching - i.e. A01 on OT will always cause pattern A01 on A4 to play.

Not sure if this is what you want to do but pretty easy to set up. Might mean having to duplicate patterns on one or both machines if you want to mix and match diff OT patterns with different A4 patterns though.