Hi thanks for your advice. If i’m not mistaken i saw Cenk copy/paste multiple trigs in one of his instructional videos. Didn’t have a problem with it before the update. But perhaps it’s user error on my part, will try again later (also with your suggestion)
you can copy paste multiple trigs just fine if you follow that procedure and hold only one at paste time !
Hey thanks man! I can get it to work now. It still behaves a bit weird, but i can keep going that’s what counts.
Behaviour that occured:
i copy the first four trigs, then i hold one 
trig and paste and it pasts the first 4 trigs, but also trig 10.
Or copy more than 4 trigs, it says … trigs copied. Then paste them and it says … trigs pasted, but it didn’t paste them.
Just got my RYTM and had a question about CY Ride. My Component 1 (C1) parameter does not seem to effect the sound. Is this normal? C2 and C3 seem normal.
Thanks.
It should work, it’s the attack/early transient phase
reduce C2 & C3 to zero to test if it’s still unresponsive, that could potentially point to a calibration issue
as ever, test on a empty pattern with a clear kit (then load ride) to avoid other hidden locks clouding things !
I think it’s faulty 
I tried re-calibrating and reinstalling the OS. Empty reset. No errors on test mode. I made a ticket at HQ but I’m wondering if I should just return it to where I bought it. Didn’t really want to wait for weeks shipping it to Sweden due to one cymbal parameter not working.
Not good news. Not saying your wrong, but it does sound a bit odd to have one small aspect be out like that
Did you zero C2 & C3 and tweak C1 min to max after that, all from a vanilla state (it’s almost a subtle aspect when 2 or 3 are full tilt), no other devices hooked up etc - definitely no scenes etc (thus starting from a fresh kit)
If there were fundamental issues, i’d expect them to possibly manifest themselves in other models too on that voice circuit
It’s important wrt establishing status to start from fresh (new kit, double click synth, set to ride) with that particular machine, if you were using an inherited kit using that ride type it’s possible, albeit remote admittedly, that it’s a legacy of changes that i know were introduced before release
sounds like you’ve tried everything else (should rule out most of the above tbh), but be sure to allow it to sit for 2>3 hrs idling before calibration too
test with TYP C, that one’s the most pronounced wrt C1
Also although it’s the same voice, might be worth trying it on both Tr11 & Tr12 to be sure they both sound identical (they should)
1 Like
Two bugs:
-
Sometimes, after an unknown button combination, the sample of the CH9 track doesn’t sound anymore. No matter what I try, clearing all pages, loading any sample, reloading the kit, changing patterns and back. Only restarting does it. I end up using only the synth to continue with the workflow, since I usually use that track for a typical hihat.
-
There is no ‘retrig quantize’ option on the retrig menu, like the manual indicates…
Don’t know if anyone say that but
Function + chain clear chain but restart patern from start to.
It can be useful to restart but not here, retrig +tempo can be a better place
everybody updated to 1.30C already? I wonder if most of these issues have been fixed now?
Yep 1.30c for me
some very strange bugs yesterday when used AR 1.30c with OB 1.10.1:
-
when I turned up resonance, the sounds sounding like bitchrusher - but only from 30% or 40% resonance on
-
AR started to play random notes on random channels
-
sequencer doesn´t triger the notes anymore … so I set diffierent trigs (red LED on) - but it doesn´t triggered any sound - even the pad of the tracks doesn´t light up when triggered.
I switched buffer from 64 to 256 - and it worked again … puuh! … but very strange behavior! I always asking myself, if Elektron adds more and more complex synth engines and overbridge … how does this affect the cpu etc? I mean … what is, when the electronics gets to hot?
This is very clearly a bit of info for an overbridge thread, if it happens on the AR when it’s running in isolation then by all means post it here
Also, best to think of bugs as very repeatable issues that can be recreated from a very simple starting point, methodically. Others should be able to recreate them as well
Throw in computer environment variables and it becomes even more difficult to narrow things down if the explanations are vague, this is why i body-swerve OB issue threads and look at these ones.
It adds noise if we add little bits of feedback in the wrong places. Someone may benefit from the buffer advice, but best to put it in the OB pages next time so it may help someone browsing
If the AR is showing you the barber-poll graphic from time to time, you know it’s struggling a bit, my hunch is that the buffer issue is far more to do with the computer end than the AR itself, otherwise nobody with an identical AR could use those settings for the most part
I don’t think heat is an issue, but i’ve read that the AR is already given a proper workout, so no doubt adding in full on OB sessions on top can push it quite hard
you are right … but I don´t know if it is new AR OS or OB releated. The problem with the resonance … yeah could be a overbridge related problem. But the sequencer problem? I don´t think so. How should OB and especially the Buffer size related to the sequencer? The sequencer was runing but did not trigger any sounds. I checked the trig menu and trig conditions - everything was as it should be.
Okay, I have something weird, not really a problem, just puzzling.
I have identical BDs (machine is Sharp) on Pad 1 and Pad 2. They act differently - if I trigger Pad 1, the pad stays very faintly lit, the other does not. Investigating in Ableton shows be a noise floor of -96db, caused by Pad 1.
When I turn off the infinite decay on the Amp section and change it to a long decay, this goes away, the noise floor becomes much lower noise of -120 db (except a spike at about 1Hz, which you can’t hear of course.
I think it strange that the two pads show different behavior with the same sound on it.
Anyone else has this?
K
Simon already stated that “this is to be expected” in another thread. The bottom four machines are not 100% identical.
1 Like
I’m sure it’s a know bug but I haven’t seen mention yet on the forums:
Found while trying to sync Analog Rytm with Ableton (non Overbridge). If you turn on metronome and then mute all tracks so you only hear the metronome, then turn metronome off and unmute tracks the AR remains in a state where muting any track will also mute BD1. Remains in this state till reboot.
Have you submitted a ticket yet?
Not yet but I will. I have another ticket already which is getting slow response so I didn’t want to add to it.
Edit: Just submitted ticket.
I had that problem with the letters as well.