Octatrack As Mixer?

andajazz · 2014-05-05T19:00:28.000Z

@ Credo:

Is there a way to have 4x Mono to the inputs and with the DIR in the Mixer settings send them all to the main outputs, but on both channels?

I tried that, but I only managed to send 2 pairs of stereo with DIR, the 4x Mono were only heard on one side each. So I had to use the thru machine to get them to both sides.

MDM · 2014-05-06T04:41:32.000Z

you can also just route the audio through the A4 without processing it in the synth section
just levels and balance and send effects … that would give you the best signal.

Dawid · 2014-05-06T06:24:03.000Z

[quote=“” MDM""]
you can also just route the audio through the A4 without processing it in the synth section
just levels and balance and send effects … that would give you the best signal.
[/quote]

You mean without using up a voice? And still use effects on the external synth? How?

Mannity_Joseph · 2014-05-06T07:15:58.000Z

""andajazz"":

@ Credo:

Is there a way to have 4x Mono to the inputs and with the DIR in the Mixer settings send them all to the main outputs, but on both channels?

I tried that, but I only managed to send 2 pairs of stereo with DIR, the 4x Mono were only heard on one side each. So I had to use the thru machine to get them to both sides.

They way I do something similar is have 2 thru machines, One for input AB and one for input CD and I then use 4 flex machines playing back the the recorded inputs and I pan each one like :

1 Flex Thru Input A left > Main Out Left

2 Flex Thru Input B Right> Main Out Right

3 Flex Thru Input C Left >Cue Out Left

4 Flex Thru Input D Right>Cue Out Right

This way the tracks coming in get processed in the Octatrack and then get sent out without each track interfering or getting mixed with each other. Also you don’t have to mute the source you can just mute the channels on the Octatrack. From there you setup transitions between the Thru’s and the Flex’s enabling you to mangle and effect the inputs and have each kept separate when sent back to a daw or mixer.

Low_Life · 2014-05-06T07:57:35.000Z

""Dawid"":

[quote=" MDM"]you can also just route the audio through the A4 without processing it in the synth section
just levels and balance and send effects … that would give you the best signal.

You mean without using up a voice? And still use effects on the external synth? How? :O[/quote]
Go to the OSC section on the FX track (best section on the A4!)

Dawid · 2014-05-06T08:20:09.000Z

[quote=““Low Life””]

[quote=“Dawid”][quote=" MDM"]you can also just route the audio through the A4 without processing it in the synth section
just levels and balance and send effects … that would give you the best signal.
[/quote]

You mean without using up a voice? And still use effects on the external synth? How? :O[/quote]
Go to the OSC section on the FX track (best section on the A4!) [/quote]
Very interesting, I will try this right when I get home tonight. Thank you!

MDM · 2014-05-06T18:15:58.000Z

PS: read the manual it’s not that big for the A4

Dawid · 2014-05-14T12:39:46.000Z

""MDM"":

and also don’t forget that your Analog four has 2 inputs as well, so you could let two mono synths come in there , and use the effects of the A4 instead…
would be a shame not to use you A4 in stereo !

But then I can’t affect the A4’s sound with OT effects and such without also affecting the two synths I would have plugged into the A4, right?

Just got my OT today, can’t wait to get off work so I can get home and dig in!

MDM · 2014-05-16T06:00:24.000Z

""Dawid"":

But then I can’t affect the A4’s sound with OT effects and such without also affecting the two synths I would have plugged into the A4, right?

well you could always sample elements in the Octatrack separately and treat those - you will always have to make some choices about how to set up or route your gear and not everything will be possible at the same time, you have to work with the inputs you have and find out what works best for you, but try everything So far I haven’t found the need to use any of the Octatrack’s effects on the A4 whatsoever, the A4 has plenty of amazing effects and so does my Nord Wave - so I just use all 8 tracks on the Octa for internal Octa sounds…

Dawid · 2014-05-17T10:28:20.000Z

[quote=““MDM””]

Dawid:

But then I can’t affect the A4’s sound with OT effects and such without also affecting the two synths I would have plugged into the A4, right?

well you could always sample elements in the Octatrack separately and treat those - you will always have to make some choices about how to set up or route your gear and not everything will be possible at the same time, you have to work with the inputs you have and find out what works best for you, but try everything So far I haven’t found the need to use any of the Octatrack’s effects on the A4 whatsoever, the A4 has plenty of amazing effects and so does my Nord Wave - so I just use all 8 tracks on the Octa for internal Octa sounds…[/quote]
Right, awesome!

I look forward to this setup when I get my AR:

A4 and AR going into the OT’s 2 stereo inputs, and my other synths going into a small mixer which goes into the A4 1 stereo input. (Alternatively two mono synths into the A4, or one mono synth into 1 A4 input, and several synths into my mixer which then goes into the other A4 input in mono).

I think that is going to be great!

Uturunku · 2014-05-18T11:41:55.000Z

I personally prefer not to use OT’s inputs as they slightly destructs quality of input signal due to its A/D and D/A converters. I route OT’s outputs to A4’s inputs in my setup. For other gear I use small external mixer. But sometimes it is needed to use OT’s effects.

MDM · 2014-06-07T09:40:38.000Z

really ?

i thought the Octa’s inputs were analog as long as you use them in Direct mode… ?
and only uses AD/DA when you start sampling/processing ?

nunocardoso · 2021-09-22T19:54:08.068Z

Hi all,
Im new to the octatrack and recently noticed the following.
I have a synth going into inputs A/B and mix it in via DIR, GAIN is set at 0.
When i increase or decrease the DIR level, i can hear significant stepping/aliasing on the synth audio as the volume increases/decreases.
Is this normal, does it happen for you guys as well?

Thanks

sezare56 · 2021-09-24T07:27:26.766Z

nunocardoso:

significant stepping/aliasing on the synth audio as the volume increases/decreases.

I heard that on certain type of samples, with VOL or LEVEL assigned to the crossfader. So I wouldn’t be surprise that it’s also the case with DIR.

nunocardoso · 2021-09-24T08:26:18.050Z

Thanks for replying.
Wanted to understand if this is an issue with my unity or just expected behavior.

sezare56 · 2021-09-24T08:56:07.559Z

nunocardoso:

expected behavior

I wouldn’t expext that from Octatrack, but I can confirm there are steppy noises changing DIR level. Obvious with a sine wave for exemple.

Same noises as VOL or LEVEL assigned to the scenes, moving crossfader to fade out.

Surprisingly, it doesn’t seem to happen changing VOL or LEVEL directly.

nunocardoso · 2021-09-24T16:01:02.208Z

Thanks for checking.
Yah i find surprising as well that other volume related params change smoothly but not the DIR one.

Romann · 2024-02-01T23:01:21.705Z

Still no OT( but.

A silly idea came to me and I dare you all to ask. Can I route the stereo pair from the audio interface (with a bunch of equipment) to the stereo inputs of the OT and from the OT to the monitors?
Can the OT be a thru conductor and at the same time record my equipment when needed when I want to in my tracks? Like a bypass?

image1432×828 97.8 KB

GurtTractor · 2024-02-01T23:07:25.100Z

The OT has a direct monitoring mode in addition to thru machines, so yes.

Romann · 2024-02-01T23:20:15.998Z

Thank you. this is the last reason to buy OT. Convincing)

Hopefully setting up this route isn’t the hardest thing to do.