Octatrack 64 breakbeat x 16 slices megabreak of doom:

sezare56 · 2023-03-28T05:10:00.593Z

Leonsarmiento:

should also be posible in PO-33 K.O.

I don’t know how, this is no way to change slices with a knob or fx on PO33.

Now it is possible with Digitakt.

sezare56 · 2023-03-28T05:11:37.836Z

markov_process:

because of the sheer amount of work it took to organize and etc

You can do the matrix with Octachainer.

markov_process · 2023-04-02T22:04:36.916Z

Yes that’s what I’m alluding to in my comment.

sezare56 · 2023-04-02T22:08:35.768Z

markov_process:

my comment

Ah ok wasn’t clear to me at first.
Once I did the matrix with OT !

MEGAGEN_8x8V5554×828 171 KB

markov_process · 2023-04-09T09:33:03.677Z

Would you mind walking through that one?

sezare56 · 2023-04-09T13:50:37.237Z

I made this before @Abhoth made a Megabreak mode for Octachainer, so I’d recommend to do it with it. Well if you insist, I can help if you seriously begin to try it.

And…since realised that you can switch slots synced by an lfo, I’d rather use that method to switch loops (no Megabreak matrix needed)
More obvious at the end of the video with dnb loops…

mrjayjayjay · 2024-06-16T00:38:44.139Z

Ah! Thanks for confirming this. I’ve been keen to try this with my Digitakt for some time but wasn’t clear if it was possible. I’d love to set it up - could you explain the basics and I’ll figure out the rest please?

sezare56 · 2024-06-16T14:53:07.169Z

mrjayjayjay:

Thanks for confirming this.

Control Digitakt slices with external midi ?
You need to select Slice/Grid machine, and select the keyboard symbol as Slice value.

mrjayjayjay · 2024-06-16T17:05:23.922Z

Sure, but I’m not clear how you’d get from that to arranging sets of break slices per pad and changing the break on the fly, as with the mega breakbeat on Octa?

sezare56 · 2024-06-16T18:28:12.131Z

mrjayjayjay:

Sure, but I’m not clear how you’d get from that to arranging sets of break slices

Easier with DT, no need for megabreak. Create linear locks for sliced loop, change slots…
Done.
(Use same length and tempo for all loops).

mrjayjayjay · 2024-06-17T18:42:07.052Z

Cool!

Laser · 2024-06-17T19:53:20.292Z

Nice!

Is it possible to map a CC to select the slots?

(I don’t own a DT).

sezare56 · 2024-06-17T20:12:28.264Z

Laser:

Is it possible to map a CC to select the slots?

No mapping but CC 19 is Sample Select (Slot) CC for DT1.
(No CC in DT2 manual)

Laser · 2024-06-17T20:37:29.699Z

Confused…

So you can use an external controller to control Slot on DT but not DT2?

Ex-Octatrack owner, had great fun doing this with my Octatrack, using a Launchpad!

sezare56 · 2024-06-17T20:54:15.321Z

Laser:

not DT2

No CC yet, I hope it will come back. NRPN only.
(From manual, and I just tested CC and NRPN send from DT2 knobs)

markov_process · 2024-07-04T21:52:35.870Z

this is sooo cool! thank you for making this

Watto · 2024-07-05T03:12:19.202Z

@sezare56 and @Laser

DTog has 128 slots/project, DT2 has 8x128 slots/project… thats why they’ve gone with nrpn instead of cc to control sample slot on DT2, CC just doesnt provide enough available values unfortunately!

sezare56 · 2024-07-05T07:58:37.390Z

Watto:

CC just doesnt provide enough available values unfortunately!

It does for slots. You just need another CC for the 8 banks.

Laser · 2024-07-05T15:48:56.546Z

Yeah f*ck NRPN!

I’m exploring OSC at the moment… I look down on MIDI mortals and sneer

Bobe · 2025-03-19T13:25:29.231Z

Guys i’m having a headache trying to do this again, can someone please explain easy or indicate where i can find the answer in th etopic to make the megabreak and instal with the octachainer?