No audio back to Digitone from synth (Dreadbox Typhon)

interzonez1 · 2023-09-28T09:41:01.802Z

I have projects on Digitone where I have added Dreadbox Typhon on Midi 1. Match the channel (5) to Typhon channel (5) etc. On DN Typhon plays on Midi 1 track.

When I open a new project. Start creating audio. Then setup Midi 1 exactly as other projects but NO audio is coming back to DN.
Typhon is being controlled over Midi and I can hear it if I listen on its headphone out. But nothing back at DN. Typhon and DN are connected by 1/4” left/right connectors.

I have minutely scrutinised all Midi settings on DN and they are identical on separate projects - but still NO audio on any new projects but there IS Midi on other projects. Think I’m going crazy.

Is this something that needs initialised on Typhon side? Typhon settings I don’t change either going from one DN project to the other. Yet still this crazy issue of Typhon notes coming back to DN on some old projects but not ANY new projects that I create.

acnorytm · 2023-09-28T09:47:20.171Z

You should probably read the digitone manual. Has so much helpful info in there such as….

IMG_30301224×2350 391 KB

DaveMech · 2023-09-28T09:47:42.849Z

If you can hear typhon make sound on headphones, midi is not the problem.

I think it might be your input on DN that is set to 0 volume by default. You need to go to the master input page FUNC+LFO and turn up the volume.

interzonez1 · 2023-09-28T10:11:29.687Z

Oh wow! SOLVED!

I had no idea the default on master was 0. And still unsure how I got it working on other projects.

Many thanks!