Moog Labyrinth

dyingbeautiesproject · 2025-02-17T14:19:31.384Z

Maybe not exactly what you’re looking for, but it goes nice with a Moog Mavis and Korg SQ-1.

The SQ-1 gives more deliberate control over trig placement, gate length etc, and the Moog Mavis give a full ADSR envelope, LFO and a few handy utilities.

It frees up the Labyrinth’s internal sequencers to be focused on modulation and modifying the SQ-1’s sequence rather than being the core melody generators. Also frees up the Mod VCO for audio rate instead of LFO stuff. I think that using the Mavis and SQ-1 for the more utility aspects lets the Labyrinth’s more unique features play to their strengths a bit.

Obv if you’ve got a full rack there might be a more direct module, but I’m working with semi modulars.

LyingDalai · 2025-02-17T14:52:57.701Z

I’m using Stages from Mutable cause it does so much in term of modulations.

If you want to stay semi-modular, an A4 mk1 is cheap and offers a lot!

yokermoon · 2025-02-17T15:02:41.161Z

Appreciate these solutions and ideas folks! I’d been thinking about alternative approaches that either double as sound sources or fx so you’re in the ballpark for sure! I could also be using the Mod VCO for more modulation than I have been. Mavis has sample and hold too?

Was even looking at some modulation fx that have CV/LFO out (Warm Audio RingerBringer, Death By Audio Disturbance).
Analog Four would be amazing but think I’m short on the space and £££: a long-term goal though, can imagine that being a lush pairing.

LyingDalai · 2025-02-17T16:38:26.371Z

Befaco Midi Thing 2 could also let you use your Elektron gear to add modulations and sequencing… You can even assemble a DIY Kit, which only needs medium soldering skills.

atlaspark · 2025-02-17T23:45:07.048Z

I have Labyrinth in a small 84 hp case with Maths, which gives the Labyrinth some modulation, envelopes, attenuation, and even a clock divider which is very useful.

dnlfrnc · 2025-02-19T07:25:48.378Z

I try not to buy this thing but it’s in my mind for weeks… seems to be a super fun machine.

I already have an Edge, and with DT2 and Typhon they are enough to create the sound I’m after (stripped back minimal/perlon and rpr style)…

and yet I can’t stop watching the demo videos.

is there any max4live sequencer which is similar to the Labyrinth’s?

blushresponse · 2025-03-03T17:17:38.509Z

apeirophobe · 2025-03-05T23:30:13.400Z

Curious if there is an issue with mine. Is it not possible to hear both VCOs without FM? For instance if I have MOD-VCO FM AMT at zero, RING MOD at zero, FOLD at zero, parallel order with blend all the way to right (VCF), LP fully open and both VCOs turned up, I can clearly still hear bell like FM tones.

elxsound · 2025-03-05T23:43:57.362Z

Try keeping both the VCO LVL down and MOD VCO LVL down.

They saturate or distort pretty quickly.

@LyingDalai pointed this out to me with a very similar question when I first got it too.

apeirophobe · 2025-03-06T01:50:24.545Z

Thanks for the reply but yeah I am keeping both levels below 12 o’clock.
I also tried this duophonic patch with no luck (Same FM sound as before and not separate duophonic VCOs as in the video).

In fact, this presented another issue - my mixer is not functioning! With the patch in that video, I can always hear a blend of MVCO and noise no matter the position of the mix knob. Think my unit is borked.

LyingDalai · 2025-03-06T07:43:27.151Z

To have no inter-modulation I need to keep both levels bellow 9 o’clock.

And both oscillators start to clip at 12 when they are alone.

This synth has gorgeous clean tones but the span for these is very narrow.

A pity there is no OSC 1 out.
The patch bay is very frustrating.

Btw, I suggest to use a compressor/limiter behind the Labyrinth cause wave folding adds a lot of harmonics and the general volume level rise is rather unmusical to me.
(And as for FX, a delay doesn’t hurt)

sazb30 · 2025-03-06T09:23:57.498Z

Also remember that the VCO’s are being sequenced by different sequencers. Patch seq 1 CV out to Mod osc v/oct in to ensure that both oscillators are tracking the same pitch.

LyingDalai · 2025-03-06T09:37:09.255Z

apeirophobe:

With the patch in that video, I can always hear a blend of MVCO and noise no matter the position of the mix knob.

Which mix knob are you talking about? “U MIX 1 LVL”?

I believe it’s pretty safe to say there are chances your unit works as intended.
On the Labyrinth, some aspects are not always obvious, so it’s easy to assume something works in a way, when it does something else than what is expected.

Elekktrikk · 2025-04-26T06:56:08.385Z

Thank you very much for that honest video. It saved me the hassle of ordering, becoming disappointed and sending back. Nice studio

DAS_NOISE · 2025-07-12T21:53:55.547Z

Today has been my first day with the Moog Labyrinth. I have noticed a weird behavior on the sine wave. For clarification, no modulation is applied whatsoever. I wonder if someone have noticed the same or if it is just my unit.

I am ok not being a pure sine wave, meaning there are harmonics (even if they are under 40 dBc in some cases) but I was surprised by seeing some big spurs as well. In this example, I have tuned at C2, and you can see a strong presence of G note as well, being G3 only around 9-10 dB from the carrier! I guess it’s the same on all the units, but just checking with you if your units exhibit the same behavior.

Thanks for your help!

Screenshot 2025-07-12 at 23.39.042606×686 235 KB

LyingDalai · 2025-07-12T22:04:28.606Z

It saturates very fast, so you only get a sine under 9 o’clock, iirc.

DAS_NOISE · 2025-07-12T22:10:02.325Z

oh I see, that was it. Thanks! I must say regardless this “issue” I find the labyrinth pretty fun so far.

_l · 2025-08-14T20:48:34.421Z

Can any labyrinth owners clue me in on how to imitate the sequencers with eurorack modules?

It seems like two Turing machines having their signals mixed and then run through a quantizer. Am I right about that signal flow?

I love the labyrinth sequencer concept but I want to use it to control other synths and take up less space

shigginpit · 2025-08-14T21:50:05.964Z

If you didn’t already come across this information, I think that at least some of it should be useful to you.

https://modwiggler.com/forum/viewtopic.php?t=286446

_l · 2025-08-14T23:17:27.577Z

Oh I should have searched harder. Thanks

There is this mix knob on the labyrinth that I believe mixes between two Turing machines.

Screenshot_20250814-1614451080×846 74 KB

I guess you can mix two outputs of the bloom but I’m imagining something more immediate. Or maybe I’m wrong about what it does