MnM output management

Giuseppe_Magnatti · 2014-05-01T17:57:18.000Z

Hi everybody,

just wondering how do you manage the 6 MnM output…

Do you connect each of the 6 output separately, do you use just the main stereo output, do you mix in the box or do you use 1 output for bass sound and stereo output to pad, strings etc…

Any suggestion really appreciated

Many thanks

FreeFall · 2014-05-01T21:34:02.000Z

[quote=““Giuseppe Magnatti””]
Hi everybody,

just wondering how do you manage the 6 MnM output…

Do you connect each of the 6 output separately, do you use just the main stereo output, do you mix in the box or do you use 1 output for bass sound and stereo output to pad, strings etc…

Any suggestion really appreciated

Many thanks
[/quote]

Yes, to all of your ideas, and then more!
Output for bass alone is great, because you can control it in the mix much better. Otherwise, I just mix in the box (why make things more complicated?). The simplicity of the set up is freeing.
Besides that, I usually only use the other outputs for feeding sound back into the MNM, or in case I have a different FX tracks that need to be routed individually.
There really is no "right’ way or “best” way. The flexibility is there for you to explore, and to inspire new ideas you never thought of.

Giuseppe_Magnatti · 2014-05-01T21:45:10.000Z

Hi FreeFall…

Mix in the box would be best as you say, but if you are using also other machines at the same time i maybe need a plan
I like the mono output for the bass sound and also for the BBOX maybe…

The rest STEREO…

Many thanks

2Bit · 2014-05-12T03:23:38.000Z

is it possible to have mono signals aswell as stereo in the same setup?

Giuseppe_Magnatti · 2014-05-19T15:07:44.000Z

Yes you can, you just need to route the output for each track

OSCar · 2014-05-19T19:43:45.000Z

[quote=““Giuseppe Magnatti””]
Yes you can, you just need to route the output for each track
[/quote]

You probably should clarify there -
Mix outputs are always grouped as AB, CD & EF pairs.
Any track can be routed to any pair or a combination of any of the three pairs.
If you want to use a mono output though you are going to have to hard pan that voice hard left or hard right on pairs CD or EF for a mono output signal and if using the internal delay you may get bleed into the opposing stereo channel.
How you choose to utilize the routing is entirely up to you.

2Bit · 2014-05-19T21:23:05.000Z

thank you very much. i figured id have to hard pan and essentially use no internal delay