Max sample files on the +drive?

L4rs3rik · 2017-05-28T13:31:44.711Z

You both have valid points, might be some technical reason for a 2048 sample file limit on the +Drive for sure.

The reason for me thinking this might be a typo is that reading trough the manual pretty much everything about samples behaves and works exactly like on the Analog Rytm, this however stands out quite a lot.

AdamJay · 2017-05-28T14:04:09.456Z

All the more reason to use chains or streams.

sezare56 · 2017-05-28T14:45:08.693Z

+1 !
120x2048 sounds seems enough !

AdamJay · 2017-05-28T14:47:13.618Z

I also think it may be a typo and at minimum a confusion of “sounds” with “samples”.
I think that LarsErik is right on the money. At least I hope so.

2048 “sounds” = 256 sounds in 8 banks. Sure. Makes sense. Why should Samples follow the same scheme, when don’t they in Rytm?
I can’t see why DT would need to duplicate ALL samples for kits when it just loads 127 samples into a 64MB Project as needed.

mec1 · 2017-05-28T14:48:18.601Z

I agree , I am making whole drum machine kits into a stream rather than one shots will help me :
a:) find what I am looking for
b:) not use as many slots

I can foresee scrolling lists of hihat names tedious process.

L4rs3rik · 2017-05-28T15:51:15.316Z

Sample chains makes a lot of sense for keeping material organized and saving up precious sample ram slots. Digitakt is also better equipped for sample chains then for example the Rytm (imho) since there’s a sample length (LEN) parameter and a two digit precision from 0.00 to 120.00 when selecting length and start of sample playback.

However having to make chains for saving up +Drive “sample storage slots” seems very unlikely the more I think about it…

sezare56 · 2017-05-28T16:01:24.044Z

So how many possible start points ?
120 x 100 ?

Olle · 2017-05-29T11:56:32.532Z

This is a typo. You can have “unlimited” amount of samples on the +Drive. The text should say that Sounds are limited to, 2048 not samples.

L4rs3rik · 2017-05-29T12:24:08.394Z

Good stuff! thanks for answering Olle.

restlessboy · 2017-05-31T09:26:30.942Z

So in theory, if your DT was getting full you could resample a Sound, turning it back into a Sample and leave it on the +Drive outside the 2048 working slots until it was needed again, then turn it back into a Sample?

L4rs3rik · 2017-05-31T13:09:57.447Z

I honestly don’t think you need to resample sounds to free up space.

2048 sound presets is plenty since you on top of that have 128 patterns per project that each can hold 8 sound presets. So 1024 sounds for each project, and you can have multiple projects.

The sounds stored in the sound banks are detached from the sounds used in a pattern. You can load a preset sound into a pattern but if you change it you don’t have to save it to the preset bank if you don’t want to. It all gets saved into the pattern/kit structure.

However, for argument’s sake, would fill up your Digitakt with sound presets a better way to free up space is to midi sysex transfer sounds to your computer for storage.

restlessboy · 2017-05-31T14:30:57.109Z

I agree it’s probably more than enough. I’m actually a bit baffled by the people saying 128 per project, 2048 in total isn’t enough. But it’s even better knowing that you can have raw stems languishing in the plus drive unallocated to the ‘in use’ list if need be.

I think the Digitakt’s limitations - such as they are - will inspire creativity. As a one time Octatrack owner I really like the fact it does less. It does 90% of what I wanted the Octatrack to do, and just looks soooo much simpler and quicker to use.

[I also don’t care about lack of song mode. But wouldn’t say no to a bit of time-stretching]

eangman · 2017-05-31T20:27:57.761Z

Sorry about that typo. It’s fixed in the new version of the manual.

mec1 · 2017-05-31T20:38:13.477Z

On the transfer App, can this back up the entire unit?
If so, a quick backup and you can wipe the slate clean if you use the entire memory/ram
Probably a good thing to do, say once a year anyway, to start fresh.
EDIT: OB should be able to manage that task as the website says it acts like a librarian.

L4rs3rik · 2017-05-31T21:55:57.826Z

Shit happens.

buzzingblood · 2017-06-04T11:38:22.152Z

i was just wondering about this too. thanks for the edit/update.

PeterHanes · 2017-06-04T20:20:55.751Z

2 posts were merged into an existing topic: Introducing Digitakt

Baztek · 2017-06-10T14:27:51.276Z

I did, the Digitakt swallows them like a pro.
She’s chugging for a good twenty minutes but no problems what so ever.

The waveforms perform properly when looped. 10/10.

Though in my opinion the Digitakt is more suited for longer samples which you can pillage for more interesting sounds.

Edit:
Ended up formatting my +drive. Though there weren’t any problems having 4500 samples on the Digitakt, it really served no purpose.
I advise to just move a select few chosen waves over. And don’t forget the Digitakt comes with a couple Factory SCWs.

Cip_pha · 2017-06-27T17:20:13.293Z

Sorry if I´m posting this in the wrong thread… when I press Func + Level/Data I get a message that reads “+drive has no sounds”. Is this normal? Acording to the manual there should be a full library of sounds to choose from. What am I doing wrong? Thanks to anyone who answers!

L4rs3rik · 2017-06-27T20:07:57.755Z

Cip_pha:

Sorry if I´m posting this in the wrong thread… when I press Func + Level/Data I get a message that reads “+drive has no sounds”. Is this normal? Acording to the manual there should be a full library of sounds to choose from. What am I doing wrong? Thanks to anyone who answers!

My guess:

You might be confusing sounds with samples. Lots of samples on firmware version 1.02, but no sounds. Sounds are presets, that’s a sample and all parameters pages.
You updated to firmware 1.0.3 but you haven’t performed an factory reset. 64 presets are included in this Digitakt update. (Factory reset overwrites Sound Bank A and Project 001)