Is my Octatrack crossfader OK?

darenager · 2022-07-18T09:35:10.803Z

Both my mk2 do it, there are 2 rails which the fader slides on, so any slight sidewards pressure will cause a bit of friction.

sabana · 2022-07-18T09:38:44.295Z

Theres somthing erotic about the video. Minimal friction i guess

natehorn · 2022-07-18T10:09:23.629Z

So it seems that there’s maybe a little inconsistency in how the crossfaders behave - I’d have to guess it’s probably due to minor tolerances in the part - maybe some just come a little bit more ‘sticky’ than others.

I noticed that even just pressing down lightly on it with one finger is enough to get it to ‘grab’ sometimes, which I feel would catch me out in live situations - based on videos I’ve watched mine defintiely seems a bit more grabby than average.

It’s a lovely crossfader when you’re in its sweetspot but the one on my XONE has a lot more tolerance for weird angles!

bodymechanics · 2022-07-20T18:13:41.371Z

Went to a show last night, got my hands on an OT MKII
The Cross felt perfect!
Just something to consider

acidk · 2022-07-23T12:42:24.112Z

Hmpf - have a similar problem with mine (2019 grey) while pulling gently from top to the bottom - pushing slightly from the bottom - no problem at all. Not happy with this behavior, though.

What’s the current status of your device?

natehorn · 2022-07-23T13:11:25.829Z

Currently waiting for a replacement from the store - I’d only had mine a week so an easy swap!

Ulysses · 2022-07-23T16:06:00.334Z

When you move the crossfader a little bit sideways up/down, does it stop like in the video?

bodymechanics · 2022-07-23T18:09:52.953Z

Not the one I touched the other night.
I asked him if I could mess with the cross just because of this thread.
It was buttery, just like my MKI

Ulysses · 2022-07-23T18:18:05.969Z

I forgot to ask. MKI or MKII?

bodymechanics · 2022-07-23T18:25:05.031Z

The one I messed with the other night was an MKII, thats why I posted here about it.
I was excited to find out.

HBIII · 2022-07-28T03:02:41.519Z

Since the pandemic there have been a lot of QC issues with basic mass produced parts coming out of china and elsewhere. I imagine synth manufacturers are having to just let stuff slide to get things made. Pots and faders have become pretty terrible lately, no two feel the same. Different resistance, different amounts of wobble, different shaft lengths (so knobs are at different heights), binding and sticking, scratchy, gritty, etc. Really a lot of trash parts now… and more expensive too :-P!

bodymechanics · 2022-07-28T03:11:15.115Z

This kind of answers a question I posted in another thread about wether or not MKII’s live up to the promotional hype that the parts would be better.
At this point if I ever have to buy a replacement for any of my Elektrons, I’m DEFINITELY sticking to the MKI’s

natehorn · 2022-07-28T14:52:33.319Z

So update from me - got my replacement today and was reassured to see that the box looked prestine this time.

Regarding the slider - I have to be honest I think it feels the same - possibly even slightly worse I’m going to assume this is just within the tolerance of the part and that I just need to use it within its sweet spot and avoid pressure in odd directions.

One of those times being in a store and being able to check a few units can be very helpful!

So if you saw my video above and are concerned your fader is the same - I don’t think it’s anyting to be concerned by.

bodymechanics · 2022-07-28T15:07:44.756Z

It’ll probably feel perfect once you start using it a lot.
I worked my first cross fader rubber completely down to the metal
I fucking LOVE the OT!!!

lowph · 2022-07-28T15:12:08.387Z

I’ve never considered testing the motion in the video, and I’ve had a lot of gear with crossfaders. I don’t think you’ll accidentally push up or down when the fader moves left to right. It’s probably fine!

Ronan87 · 2023-01-21T00:08:50.855Z

Hey there! Is there anyone out there who can verify if this is normal on the Octa? It’s brand new, but the fader feels loose… I know its supposed to be loose side to side, easy to slide, but it also jiggles up and down…and not in a nice way! It’s the entire stem, not just the cap. Thanks!

https://drive.google.com/file/d/1crA2xKPf6cwgQl6xCEi1p47AUufv8TEp/view?usp=drivesdk

Microtribe · 2023-01-21T00:13:49.209Z

Cant view the video but:

Yes a little transverse play is normal. If its more than a tiny bit then you can open up the OT, and tighten any loose screws on the assembly. (This will void your warranty most likely)

Or raise a ticket with elektron support and get them to fix it.

sezare56 · 2023-01-21T00:14:52.770Z

Apparently there is an autorisation request to see the video…

Ronan87 · 2023-01-21T00:16:24.909Z

Oops, sorry about that…how about now? Can you see it?

Ronan87 · 2023-01-21T00:17:35.122Z

Sorry my mistake, you might be able to see it now…