Intech studio PBF4 with Digitakt v2

[shigginpit]

You can see if anything in the topic below is helpful to you in figuring it out, but it looks as though this is not just a “you’re using the wrong cable” kind of issue.

DT 2 and Intech midi connection - Track level

midi_send() takes 4 parameters: channel, command, CC/note number, value. ‘Channel’ is the MIDI channel from 0-15 ‘Command’ is an Intech defined value based on the type of data you want to send: ‘176’ if you’re sending CC and ‘144’ for note. ‘CC’ is the CC number (or note) you are using ‘Value’ is the value being sent (0-127 for example) If you want to control DTII track value, the CC is ‘95’. If you’re controlling a track setup on MIDI channel 1, your midi_send() function would be: midi_sen…

Good luck.